GE IC695PNC001-AC PACSystems RX3i PROFINET Controller Module

GE IC695PNC001-AC PACSystems RX3i PROFINET Controller Module

PACSYSTEMS RX3I PROFINET
GE IC695PNC001-AC PACSystems RX3i PROFINET Controller Module
RX3i rack controller for supervising compatible PROFINET IO devices; use the complete -AC nameplate, firmware level and project hardware catalog when matching an installed unit.
New & originalOne-year warranty3–5 daysCondition: In stock
Send Inquiry
Description
GE · PACSYSTEMS RX3I PROFINET
GE IC695PNC001-AC PACSystems RX3i PROFINET Controller Module

RX3i rack controller for supervising compatible PROFINET IO devices; use the complete -AC nameplate, firmware level and project hardware catalog when matching an installed unit.

Description and purpose

IC695PNC001-AC provides the PROFINET controller role for a PACSystems RX3i rack. It exchanges cyclic I/O data with configured PROFINET devices while PAC Machine Edition holds device names, network settings and module configuration.

For replacement, record the complete IC695PNC001-AC label, firmware, rack slot, Ethernet topology and project backup. A similar front panel does not prove that another revision is accepted by the installed CPU firmware and project.

Purchase verificationSend the complete IC695PNC001-AC nameplate, installed-system details and clear connector or terminal photographs. We will compare the requested unit with the application before quotation.
Technical specifications

Values restated from the applicable manufacturer product documentation. Confirm the complete supplied-unit nameplate and installed revision before replacement.

Model
IC695PNC001-AC
Manufacturer
GE / Emerson
Product family
PACSystems RX3i
Product type
PROFINET Controller module
Network role
PROFINET IO Controller
Rack interface
RX3i PCI backplane
Ethernet media
Copper Ethernet ports; verify installed topology
Configuration
PAC Machine Edition hardware configuration
Commissioning check
Device names, IP settings and firmware
Revision identity
Match the complete -AC nameplate
PACSystems RX3i PROFINET configuration support
Planning a IC695PNC001-AC replacement or expansion?
Share the complete IC695PNC001-AC identification, controller or rack details, wiring, quantity and destination with Sales Manager Myrtle. We will check the stated configuration and flag suffix, firmware or interface details that still need confirmation.
Applications
Distributed RX3i I/OControls configured PROFINET remote I/O stations.
Machine networksCoordinates cyclic I/O exchange with supported devices.
Expansion projectsAdds PROFINET control where the CPU and firmware support it.
Installed-system replacementRestores a documented controller position after configuration review.
Ordering information
PaymentT/T
PortXiamen
Delivery time3–5 days
ConditionIn stock
Buyer questions
FAQ about IC695PNC001-AC
Is IC695PNC001-AC interchangeable with any IC695PNC001 revision?
Not by appearance alone. Compare the complete suffix, firmware, CPU support, project hardware catalog and rack configuration before replacement.
What information should I back up before changing IC695PNC001-AC?
Save the PAC Machine Edition project and record device names, IP settings, network topology, firmware revisions and rack slot. These items are needed to restore communication predictably.
Why can PROFINET devices remain offline after fitting IC695PNC001-AC?
Check device-name assignment, IP addressing, cabling, switch/VLAN behavior, controller configuration and firmware compatibility. A powered port does not confirm that the configured device identity matches.
Can I move IC695PNC001-AC to another RX3i slot?
Only after confirming the applicable RX3i hardware rules and updating the project configuration. Preserve power-down procedures and the original slot assignment during a like-for-like repair.
What should be checked on a used IC695PNC001-AC?
Request clear nameplate and port photographs, verify connector condition and firmware, and confirm that the unit is accepted by the installed CPU and PAC Machine Edition project.
What should I send for an IC695PNC001-AC quotation?
Send the complete nameplate, current firmware, CPU model, rack position, required quantity, destination and a short network description so the supplied revision can be checked.
About PLCEXPORT

PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation parts. We focus on clear model verification, responsive quotations and practical worldwide delivery coordination.

PLCEXPORT engineering support
Engineering supportModel and application details are reviewed before quotation.
PLCEXPORT global coordination
Global coordinationClear communication supports international automation-parts supply.
PLCEXPORT team collaboration
Team collaborationSales and technical colleagues coordinate product checks.
PLCEXPORT inspection and packing
Inspection and packingVisible labels and package condition are checked before dispatch.
Recommended models

Published product links are grouped by brand; this selection is arranged specifically for the IC695PNC001-AC page.

Honeywell

Bently Nevada

Others - other recommended brands

Wago PFC200
Bachmann MX213
Keba C5-IPC
Advantech APAX-5580
Lütze 716425
Elmo G-MAS
Festo CPX-E-CEC
Gefran GFX4-IR
Jetter JC-440
Kontron KBox-A-150
Lenze c550
Nidec C200-064
PMA KS98-2
Sorel XHCC
Toshiba V200-16MR
Teco SG2-20VR
Wieland samosPRO
Crouzet em4-remote
Hitachi EH-150
Idec FT1A-H40RSA
Buyer support · automation parts
Confirm the exact IC695PNC001-AC before ordering

Share the full nameplate, installed configuration, clear connector or terminal photos, quantity and destination. Myrtle will review identity and compatibility points before quotation.

WhatsApp · +86 18950128464Email · sales5@askplc.com
✓ Nameplate reviewThe complete model and suffix are checked.
✓ Installed-system matchRack, carrier, wiring or network details are compared.
✓ Visual verificationCurrent product and connector photos reduce mismatch risk.
✓ Clear quotationQuantity, destination and delivery needs are confirmed.

Hot Tags: ge ic695pnc001-ac pacsystems rx3i profinet controller module, China ge ic695pnc001-ac pacsystems rx3i profinet controller module manufacturers, suppliers, GE Fanuc IC695CEP001, GE Fanuc IC695CPE302, ge pac systems rx3i, IC695CEP001 CEP Carrier Module, IC695CPE302, IC695CPE302 CPU module

Send Inquiry