Product Information & FAQ Recommended Models About PLC EXPORT Contact Us

3300 XL 8 MM · STANDARD MOUNT

Bently Nevada 330101-00-28-10-02-05 Proximity Probe

Name: China Bently Nevada 330101-00-28-10-02-05 3300 XL 8 mm Proximity Probe Manufacturers Suppliers - MOORE
Brand: Bently Nevada
SKU: 312731428

A 3/8-24 UNF, non-armored 3300 XL 8 mm probe configured with zero unthreaded length, a 2.8-inch case, 1.0-meter integral cable, ClickLoc connector and CSA/ATEX/IECEx approvals.

Bently Nevada 330101-00-28-10-02-05 probe detail

Actual product detail · model and cable construction

Configuration Decode

Base model
330101

Thread
3/8-24 UNF

Unthreaded length
0.0 in

Case length
2.8 in

Total length
1.0 m

Cable / connector
Standard · ClickLoc

Armor
Without armor

Approvals
CSA · ATEX · IECEx

Product Overview

This probe is the sensing element of a complete 3300 XL 8 mm eddy-current transducer system. Working with the matching extension cable and Proximitor Sensor, it produces a voltage proportional to the gap between the probe tip and a conductive target.

The system supports static position and dynamic vibration measurements on fluid-film bearing machines, plus Keyphasor reference and speed measurements. Interchangeable XL components simplify field replacement without individual bench matching.

Where It Fits

Radial vibration
Shaft motion at fluid-film bearings

Axial position
Thrust and displacement monitoring

Speed reference
Keyphasor and phase measurements

Critical machinery
Turbines, compressors, pumps and motors

Selection & Installation Notes

Match electrical length
Pair the 1.0 m probe with the correct cable and Proximitor system length.

Confirm target material
Published performance uses an AISI 4140 steel target unless otherwise calibrated.

Protect the connector
This -02 version uses a ClickLoc connector without an integral protector.

FAQ · 330101-00-28-10-02-05

What does this part number specify?

It specifies a 330101 3/8-24 UNF probe without armor, 0.0-inch unthreaded length, 2.8-inch case, 1.0-meter cable, standard ClickLoc connection and approval option 05.

Can the probe operate by itself?

No. It is designed as part of a matched 3300 XL 8 mm system with a compatible extension cable and Proximitor Sensor.

What can the system measure?

Typical uses include radial vibration, axial position, shaft displacement, Keyphasor phase reference and speed measurements.

Is this an armored probe?

No. Base model 330101 is the 3/8-24 UNF version without armor; confirm routing and mechanical protection before installation.

Which approvals are included?

Suffix 05 indicates CSA, ATEX and IECEx approvals. Final suitability depends on the complete installation and applicable approval documentation.

What should I send for a quotation?

Send the complete part number, quantity, system length, Proximitor model, destination country and required delivery date.

Bently Nevada · Recommended Models

Related PLC EXPORT product pages.

330103-00-02-05-01-00 ↗330104-00-13-10-02-05 ↗330908-00-19-10-02-05 ↗330190-080-01-00 ↗

330102-00-28-10-02-05

330130-040-00-05

330180-50-00

330180-90-00

Others · Selected Models

AMG 2151

64-825-0045-4

AN100

4744R

4743

1-XR4-433C

T6831A

SM322 6AG1322-1BL00-2AA0

ABB MT701.2

SM321 6AG1321-1BL00-2AA0

About PLC EXPORT

PLC EXPORT supplies industrial automation and machinery-monitoring spare parts worldwide. We assist with part-number checking, quotations, legacy sourcing and international delivery coordination.

✓ Part verification
Check suffix and system match

✓ Responsive quotation
Stock and lead-time support

✓ Global delivery
International coordination

✓ 1-year warranty
Original new products