Bently Nevada 330103-03-06-05-02-00 3300 XL 8 mm Proximity Probe

Bently Nevada 330103-03-06-05-02-00 3300 XL 8 mm Proximity Probe

BENTLY NEVADA · METRIC M10 × 1 PROBE
330103-03-06-05-02-00
Compact 0.5 m lead version of the 3300 XL 8 mm proximity probe
30 mm reach60 mm case0.5 m lead
AVAILABILITY
In Stock · Original New · 1-Year Warranty
Get a Quote
Send Inquiry
Description
 
CONFIGURATION FOCUS · METRIC M10 × 1 PROBE

330103-03-06-05-02-00

A compact 0.5 m lead version of the 3300 XL 8 mm probe

This exact suffix identifies a metric-threaded probe intended for installations where the probe body dimensions, cable length and connector style must match an existing 3300 XL transducer loop. Selection should begin with the complete six-part code-not only the 330103 family number.

Verify This SuffixSend Nameplate Photo ↗
 

✦ What This Exact Probe Does

Installed facing a conductive shaft, the tip converts the changing physical gap into an electrical response through the matched Proximitor system. The signal can represent both the slowly changing shaft centerline position and the faster AC component associated with relative vibration.

The short integral lead on this version is useful when the junction to the extension cable is located close to the probe mounting point. It is not a stand-alone vibration sensor: probe, extension cable and driver must form a compatible electrical system.

⚙ Reading 03-06-05-02-00

330103: metric M10 × 1 standard-mount family
03: 30 mm unthreaded length
06: 60 mm case length
05: 0.5 m integral probe cable
02: miniature coaxial ClickLoc connector option
00: approvals not specifically required

Replacement rule: match every suffix field and confirm the extension cable/Proximitor combination before installation.
 

Visual Identification Check

Bently Nevada 330103-03-06-05-02-00 complete probe view
330103-03-06-05-02-00 · supplied configuration view

Check more than the connector color

Before ordering, compare the printed part number, thread standard, case reach and lead length with the removed probe. Similar-looking 3300 XL probes can have different mechanical dimensions or electrical connection options.

M10 × 1 body
60 mm case
0.5 m lead
 

Configuration Snapshot

Probe family
3300 XL 8 mm
Body thread
M10 × 1 metric
Unthreaded reach
30 mm
Case length
60 mm
Integral cable
0.5 m
Connector
Miniature coaxial ClickLoc
Measurement mode
Relative vibration / position
Required companions
Matched cable and Proximitor
Approval suffix
00 · not required
 

Where This Suffix Fits Best

• Metric-thread probe brackets and housings
• Short cable runs to a nearby junction point
• Radial shaft-vibration measurement on turbines and compressors
• Axial position or thrust monitoring where the mounting geometry matches
• Maintenance replacement of the identical six-field part number

When Not to Substitute It

Do not treat every 330103 as interchangeable. A different thread, case length, lead length or connector can prevent installation or alter the completed system. Send the old nameplate and the companion cable/driver numbers for a cross-check.

Ask for a Suffix Check
 

Questions About 330103-03-06-05-02-00

What do "03" and "06" tell me?

They identify the mechanical reach: 30 mm unthreaded length and 60 mm case length. These dimensions matter when the probe must pass through a bracket or housing to reach the correct gap.

Does "05" mean a five-metre system?

For this probe ordering string, 05 identifies the 0.5 m integral lead. The completed transducer system length is determined together with the selected extension cable and Proximitor.

Can an imperial-thread 330103 replace this metric version?

No direct substitution should be assumed. This configuration uses an M10 × 1 body, so the receiving thread and mounting hardware must be metric and dimensionally compatible.

Why must the extension cable and Proximitor be checked?

The probe is one calibrated element of a transducer chain. Mixing incompatible components or system lengths can produce incorrect scale factor, linear range or measurement accuracy.

What installation information helps confirm suitability?

Useful details include bracket thread, required insertion reach, target material, extension cable number, Proximitor number and the original probe nameplate.

What should be included in an enquiry?

Send 330103-03-06-05-02-00 in full, quantity, destination and a clear label photo. If this is a replacement, include the mating cable and driver numbers to reduce selection risk.

 
 

About PLC EXPORT

EE1F6467-92AB-4192-879D-E080172F8387

PLC EXPORT supplies industrial automation and machinery-monitoring components to customers worldwide. We support clear part-number verification, fast quotation and international delivery coordination.

Clear checks · Responsive quotation · Reliable supply
 

CONTACT US

984450CA-334E-4e65-B8DB-07561C06652B
SUBJECT
Bently Nevada 330103-03-06-05-02-00

Sales Manager: Cristina
Email: sales3@mooreplc.com
WhatsApp / Mobile: +86 180 2071 4662 ↗

Send InquiryWhatsApp ↗

Hot Tags: bently nevada 330103-03-06-05-02-00 3300 xl 8 mm proximity probe, China bently nevada 330103-03-06-05-02-00 3300 xl 8 mm proximity probe manufacturers, suppliers, 330104 00 08 90 02 05 3300 XL 8 mm Proximity Probe, 330104 00 08 90 02 05 datasheet, 330104-00-08-90-02-05, 330180 51 05 Extension Cable, Bently Nevada 330104 00 08 90 02 05, Bently Nevada 330180 51 05

Send Inquiry