Products Description

The Bently Nevada 330103‑00‑10‑10‑01‑00 3300 XL 8 mm Proximity Probe is a high‑precision non‑contact sensor designed for condition monitoring and machinery protection in demanding industrial environments. Engineered as part of the trusted 3300 XL series, this probe delivers reliable and repeatable displacement and vibration measurements on rotating and reciprocating equipment. Its rugged stainless steel construction and advanced inductive sensing technology ensure long‑term durability and performance in harsh conditions.

Contact Us to Get the Best Price

Sales Person	Felicia
Whatsapp/Wechat	+86 18030132586
Email	cn@mooreplc.com
Phone Number	+86 18030132586

Products Parameters

Parameter	Specification
Model	330103‑00‑10‑10‑01‑00
Series	3300 XL 8 mm Proximity Probe
Probe Tip Diameter	8 mm
Sensing Type	Inductive / eddy‑current
Linear Range	~0.25–2.3 mm (10–90 mils)
Output Voltage	~‑1 to ‑17 Vdc
Cable & Connector	ClickLoc miniature coaxial
Typical Cable	Integral/extension (depends on configuration)
Operating Temp.	~‑40 °C to +177 °C
Housing Material	AISI 303/304 stainless steel
Weight	~0.323 kg/m
Protection	Viton O‑ring seal
Mounting	Integrated threaded body
Compliance	Industrial‑grade sensing
Country of Origin	USA

Applications

Common use cases for this proximity probe include:

Turbine vibration and position monitoring in power generation.

Compressors and pumps for early fault detection.

Motors and generators monitoring shaft displacement.

Gearboxes and rotating machinery condition assessment.

Plant asset protection systems where accurate, fast feedback is critical.

Installation Tips

To ensure optimal performance:

Set the probe gap near the recommended 1.27 mm (50 mils) during calibration.

Use shielded triad cable and appropriate wiring practices to minimize noise.

Pair with matched 3300 XL proximitor sensors for best signal processing.

FAQ

01.What materials are used for the probe and connector?

The probe tip is made of A308 aluminum, and the connector is gold-plated brass or gold-plated beryllium copper for reliable electrical performance and long service life.

02.What system lengths are available for this probe?

Available lengths include 1 m for the probe only, or 5 m and 9 m including extension cables.

03.What is the typical system mass?

The total system mass is 0.7 kg (1.5 lbm), with the probe weighing 323 g, standard extension cable 34 g/m, armored cable 103 g/m, and the Proximitor sensor 246 g.

04.How is the probe sealed against pressure?

The 3300 XL 8 mm probe uses a Viton O-ring to seal differential pressure between the probe tip and the case.

05.How is the cable attached to the probe?

The cable uses a CableLoc design, providing 330 N (75 lbf) pull strength for a secure connection to prevent accidental disconnection.

Recommendations

IC200PNS002-AC	3500/42E	IMDSM05	6DP1210-8BC
IC200PNS001-CC	1788-ENBT	SPNIS21	6DP1210-8BB
IC200CPUE05-LT	1788-DNBO	SPFEC12	A5E01162146
IC200PNS001-AC	A5E00822	IMASM02	A5E40669687
IC698RMX016-ED	IMFEC12	IMSED01	A5E00829966
IC698CRE020-JP	IMDSO14	IMCIS22	A5E02915324
IC698PSA100D	IMASI23	IMASO11	A5E00136572
IC698ETM001-EN	INNIS01	IMMPI01	A5E00843867
IC697BEM731Z	IMASI13	SPHSS13	A5E00843866
IS200VRTDH1DAC	IMMFP02	INICT13A	6DP1616-8CA
IS200VAICH1DAB	IMCIS02	INICT03A	6DP1232-8BA
IS200VCMIH1BCD	INNIS21	IMASI03	6DP1210-8BC
IS200VSVOH1BED	SPNPM22	IMAMM03	6DP1511-8AA
IC698PSA100D	3500/23E	INSEM01	6DP1230-8CC