Bently Nevada 330500-00-00 Velomitor Piezo-Velocity Sensor

Bently Nevada 330500-00-00 Velomitor Piezo-Velocity Sensor

BENTLY NEVADA · VELOMITOR SENSOR
330500-00-00
Piezo-velocity sensor for casing vibration monitoring on rotating machinery
Velocity outputMachine casing mountCondition monitoring
AVAILABILITY
In Stock · Original New · 1-Year Warranty
Get a Quote
Send Inquiry
Description
 
BENTLY NEVADA · VELOCITY SENSOR · CONDITION MONITORING

330500-00-00

Velomitor Piezo-Velocity Sensor

A rugged integrating piezoelectric velocity sensor for the Bently Nevada machinery condition-monitoring system. It converts bearing-housing and casing vibration into a velocity-proportional electrical signal for machinery protection and condition monitoring.

Request a QuoteWhatsApp Cristina ↗
 

✦ Product Description

The Bently Nevada 330500-00-00 Velomitor is a rugged, two-pin integrating piezoelectric accelerometer that measures absolute bearing-housing, casing and structural vibration. Its embedded electronics integrate acceleration and provide a velocity-proportional output suited to machinery protection and condition monitoring.

With solid-state electronics and no moving parts, the sensor resists mechanical wear and can be mounted vertically, horizontally or at other angles. It is particularly useful on machines with rolling-element bearings where vibration velocity is the preferred diagnostic measurement.

⚙ Configuration Decode

Part number: 330500-00-00
Product family: 330500 Velomitor
Sensor type: integrating piezo-velocity sensor
Connector: two-pin top connection
Measurement: absolute casing / bearing-housing vibration

Correct mounting on a clean, rigid machine surface is essential for accurate amplitude and frequency response.
 

Product Details

Bently Nevada 330500-00-00
330500-00-00 Sensor Detail

Velocity output for casing vibration

The internal piezoelectric sensing element and electronics provide stable velocity measurements without the moving parts used in traditional seismic velocity transducers.

100 mV/in/s
4.5 Hz–5 kHz
Solid-state design
 

Technical Parameters

Sensor family
330500 Velomitor
Sensitivity
3.94 mV/mm/s (100 mV/in/s) ±5%
Measurement
Absolute vibration velocity
Frequency range
4.5 Hz–5 kHz ±3 dB
Precision band
6 Hz–2.5 kHz ±0.9 dB
Maximum cable
305 m (1,000 ft)
Construction
Solid-state, no moving parts
Orientation
Any mounting angle
Condition
Original new, 1-year warranty
 

Applications

• Rolling-element bearing machines
• Pumps, motors, fans and compressors
• Gearboxes and auxiliary machinery
• Bearing-housing and casing vibration
• Continuous machinery protection
• Predictive maintenance programs

Why choose 330500?

It combines a wide usable frequency range, integrated velocity output, long-cable capability and a wear-free solid-state design. The sensor is a practical choice when casing vibration reliably represents rotor-related machine condition.

Check Compatibility
 

FAQ

What does the 330500 Velomitor measure?

It measures absolute vibration velocity on bearing housings, machine casings and structures.

Is it an accelerometer or a velocity sensor?

It uses a piezoelectric accelerometer element with integrated electronics that provide a velocity-proportional output.

Can the sensor be mounted horizontally?

Yes. Its solid-state design allows vertical, horizontal or other mounting orientations when the mounting surface and installation practice are correct.

Which machines are suitable for 330500?

It is commonly used on pumps, motors, fans, compressors, gearboxes and other machines with rolling-element bearings.

What should be checked before installation?

Confirm the mounting location, thread and surface condition, cable length, hazardous-area approval and monitor compatibility.

What information is needed for a quotation?

Send the complete part number, quantity, destination, required approvals, cable requirements and certificate needs.

 
 

About PLC EXPORT

PLC EXPORT team meeting

PLC EXPORT supplies industrial automation and machinery-monitoring components to customers worldwide. We support clear part-number verification, fast quotation and international delivery coordination.

Clear checks · Responsive quotation · Reliable supply
 

CONTACT US

PLC EXPORT team
SUBJECT
Bently Nevada 330500-00-00

Sales Manager: Cristina
Email: sales3@mooreplc.com
WhatsApp / Mobile: +86 180 2071 4662 ↗

Send InquiryWhatsApp ↗

Hot Tags: bently nevada 330500-00-00 velomitor piezo-velocity sensor, China bently nevada 330500-00-00 velomitor piezo-velocity sensor manufacturers, suppliers, 330180 90 05 pdf, 330180 90 05 Proximity Sensor, 330180 91 00 manual, 330180-90-05, Bently Nevada 330180 91 00, bently nevada sensor

Send Inquiry