GE IC200MDL650F VersaMax 32-Point 24 VDC Input Module
What matters when specifying IC200MDL650F
|
32 discrete inputs
Four groups of eight reduce panel space while retaining group-level field references. |
Positive/negative logic
Verify the wiring polarity and common arrangement for every eight-point group. |
Selectable filtering
Project configuration can add input filtering to suit the installed signal behavior. |
F-revision identity
Use the complete IC200MDL650F label and confirm carrier, firmware and project support. |
Description and purpose
|
IC200MDL650F provides thirty-two 24 V DC discrete inputs in a compact VersaMax module. The points are divided into four groups of eight, so users must preserve each group's common and polarity when moving a densely wired installation. The module supports positive- or negative-logic input arrangements and configurable filtering. Before replacement, record the carrier, terminal wiring, CPU or NIU firmware and the project filter settings; copying only the point addresses can leave a station with different response behavior. |
Purchase verificationSend the IC200MDL650F label, carrier model, CPU or NIU identity, four common arrangements, filter settings, quantity and destination. Myrtle will review the stated revision and station compatibility before quotation.
|
Technical specifications
Values restated from GE VersaMax discrete input documentation and GFK-1504. Confirm the complete F-suffix nameplate for the supplied revision.
Replacing a high-density input module without losing group wiring?
Share the IC200MDL650F nameplate, carrier, CPU or NIU firmware, four common connections and configured input filters. We will check the stated station before quotation.
|
✓ Four-group wiring review
|
✓ Carrier and firmware check
|
✓ Filter-setting confirmation
|
| Email Myrtle · sales5@askplc.com | Open WhatsApp · +86 18950128464 |
Applications
|
Machine status inputs
Collect thirty-two 24 V DC status points in one compact VersaMax position. |
Interlock monitoring
Read field permissives after checking each group's common and polarity. |
Panel retrofit
Increase input density while preserving carrier and terminal compatibility. |
Installed-system repair
Restore an existing four-group input module after full point verification. |
Ordering information
|
Payment
T/T |
Port
Xiamen |
Delivery time
3–5 days |
Condition
In stock |
Product image and identification notes
 |
What buyers should confirm in the photosRequest the IC200MDL650F front and side label, all input indicators, carrier and terminal connections. The F suffix, four common groups and connector condition must be readable. Compare the installed CPU or NIU, firmware, carrier and project filter settings. A base IC200MDL650 number alone is not enough for revision-controlled replacement. Buyer tip: Ask for current nameplate, carrier and terminal photos before stock confirmation.
|
FAQ about IC200MDL650F
|
Can IC200MDL650F replace an earlier IC200MDL650 revision without changes?
Do not assume so. Verify the full suffix, carrier, CPU or NIU firmware, project configuration and group wiring. The F label should remain part of the purchase identity.
|
Are all thirty-two IC200MDL650F inputs on one common?
No. They are arranged as four groups of eight. Preserve the correct common and polarity for each group when transferring field wiring.
|
|
Can IC200MDL650F accept both sourcing and sinking sensors?
The module supports positive- or negative-logic arrangements when wired to the published scheme. Confirm sensor type and the corresponding group common before energizing.
|
Why do inputs respond differently after replacing IC200MDL650F?
The project may use additional input filtering of 0, 1 or 7 ms. Compare filter configuration and field signal quality instead of checking only the address map.
|
|
What should I test after installing IC200MDL650F?
Verify each of the thirty-two LEDs and input bits, then test the four common groups independently. Also check carrier seating and stable field voltage.
|
What information is needed for an IC200MDL650F quote?
Send the full nameplate, carrier, CPU or NIU model and firmware, filter settings, wiring photos, quantity and destination so compatibility can be reviewed.
|
About PLCEXPORT
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components. We review model identity, visible condition and delivery details before quotation.
Recommended models
Published product links are grouped by brand; this selection is arranged specifically for the IC200MDL650F page.
Allen-Bradley
GE
Others - other recommended brands
|
Schleicher XCx 300
|
Saia PCD3.M5560
|
Berghof C-PRO 13
|
KEB C6 COMPACT 2
|
|
Elrest CM211
|
Eaton XC-303
|
LS Electric XGB XEC
|
Panasonic FP7 CPS41E
|
|
AutomationDirect BRX BX-DM1E
|
Turck TBEN-L5-8DIP-8DOP
|
B&R X20CP0484
|
Beijer X2 control 15
|
|
ICP DAS XP-9188-IoT
|
Fatek FBs-32MCT2
|
Horner OCS HE-X10S
|
Lütze LOCC-Box-Net
|
|
Parker PAC320-CWB21-3X
|
Yaskawa MP3300iec
|
Nidec C200-044
|
Mitsubishi Alpha2 AL2-24MR-D
|
|
DIRECT SALES SUPPORT · FIELD CONTROL
Need a verified IC200MDL650F for an installed I/O station?Share the nameplate, BIU revision, terminal-base photos, load details, quantity and destination. Myrtle will review the model identity and shipping requirements before quotation. |
|
| WhatsApp · +86 18950128464 | Email Myrtle · sales5@askplc.com |
Hot Tags: ge ic200mdl650f versamax 32-point 24 vdc input module, China ge ic200mdl650f versamax 32-point 24 vdc input module manufacturers, suppliers, GE Fanuc IC695CPE302, GE IC695CEP001, ge pac systems rx3i, IC695CEP001, IC695CEP001 CEP Carrier Module, IC695CPE302
