The 1746-A7 is the seven-slot chassis in the Allen-Bradley SLC 500 modular hardware family. It holds the chassis power supply at the left and provides seven module positions for a compatible processor, communication adapter, I/O or specialty modules.

For replacement work, match the complete 1746-A7 catalog number and inspect the chassis backplane, mounting points, power-supply connector and interconnect-cable arrangement. Rockwell lists this catalog as discontinued, so installed-system compatibility should be confirmed before the existing rack is removed.

Purchase verification

SLC 500 rack replacement

Panel refurbishment

Local I/O expansion

Legacy system maintenance

Payment

Port

Lead time

Condition

Send Sales Manager Myrtle the full label, installed hardware details, required quantity and destination. We will compare the stated configuration and identify any suffix, wiring, firmware or compatibility point that still needs confirmation.

Sales Manager: Myrtle

What buyers should verify in the photos

Check the complete 1746-A7 nameplate, visible catalog suffix, connectors or terminals, housing condition and any revision marking. Compare the photographed unit with the installed hardware and project documentation before replacement.

For an installed-system replacement, confirm electrical ratings, mating hardware, field wiring or network interfaces, and the configuration associated with the removed unit. Product-family appearance alone does not confirm interchangeability.

Will the 1746-A7 accept every SLC 500 processor and I/O module in my existing rack?

The chassis provides seven SLC 500 module slots, but the usable combination still depends on the processor, power-supply capacity, module current draw and project configuration. Send the installed slot list so the full rack can be checked.

Does the 1746-A7 include the chassis power supply?

No. The SLC 500 power supply is a separate catalog item mounted on the left side of the chassis. Confirm the existing supply model and its load calculation before replacement.

Can I replace a smaller or larger SLC 500 chassis with the 1746-A7 without changing the program?

Not automatically. Slot addresses can change when the chassis size or module position changes. Verify the slot map, chassis-interconnect layout and processor configuration before moving modules.

How should I check a used or stored 1746-A7 before installation?

Inspect the complete label, backplane connectors, power-supply mating area, mounting flange and interconnect sockets. Bent contacts, contamination or physical distortion should be resolved before power is applied.

What should be fitted in unused 1746-A7 slots?

Use the appropriate SLC 500 slot filler where required by the installation practice. Keep the enclosure clean and preserve ventilation around the chassis and power supply.

What information should I send for an accurate 1746-A7 quotation?

Provide the full chassis label, processor and power-supply models, installed slot map, interconnect cable numbers, quantity and destination. A front photo of the complete rack helps prevent a seven-slot chassis from being confused with another size.

Keba C5-IPC

Aaeon BOXER-6641

Advantech APAX-5580

Lütze 716425

Elmo G-MAS

Festo CPX-E-CEC

Gefran GFX4-IR

Jetter JC-440

Kontron KBox-A-150

Lenze c550

Nidec C200-064

PMA KS98-2

Sorel XHCC

Toshiba V200-16MR

Teco SG2-20VR

Wieland samosPRO

Fatek FBs-40MA

ICP DAS WP-8441

B&R X20CP1586

Beckhoff CX9020-0111

Sales Manager

Recommended details