GE IC755CSW07CDA-CL QuickPanel+ 7-Inch Unit
What matters when specifying IC755CSW07CDA-CL
|
7-inch display
800 × 480 color operator interface with projected-capacitive multi-touch. |
View and Control
Confirm the installed application, licenses and controller role before replacement. |
24 VDC supply
Verify panel wiring, protective earth and the published DC input range. |
CL revision identity
Use the complete nameplate and firmware build when preparing a replacement. |
Description and purpose
|
IC755CSW07CDA-CL is a seven-inch QuickPanel+ device that combines an operator display with View and Control capability. The base IC755CSW07CDA family uses an 800 × 480 color screen, projected-capacitive touch and industrial Ethernet, serial and USB interfaces for the configured application. The -CL marking must remain part of the purchase identity. Before replacement, back up the HMI/control project, record firmware, licenses, network addresses, serial settings and panel cutout, then confirm that the supplied revision supports the existing application. |
Purchase verificationSend the IC755CSW07CDA-CL nameplate, firmware and application versions, license details, network and serial settings, panel-cutout photos, quantity and destination. Myrtle will review the stated revision before quotation.
|
Technical specifications
Base hardware details restated from GE QuickPanel+ user documentation GFK-2847 and revision information GFK-3218. Confirm the complete -CL nameplate for the supplied unit.
Replacing an operator panel without losing its application?
Share the IC755CSW07CDA-CL nameplate, firmware, application and license versions, network and serial settings, cutout dimensions and project backup status. We will review the stated revision before quotation.
|
✓ Full revision identity
|
✓ Project and license backup
|
✓ Cutout and port review
|
| Email Myrtle · sales5@askplc.com | Open WhatsApp · +86 18950128464 |
Applications
|
Operator interface
Display machine status, alarms and commands through the configured QuickPanel+ project. |
Embedded control
Run supported View and Control functions after confirming licenses and application compatibility. |
Panel replacement
Reuse the documented cutout only after checking dimensions, gasket and mounting hardware. |
Installed-system repair
Restore HMI communications after project and network settings are secured. |
Ordering information
|
Payment
T/T |
Port
Xiamen |
Delivery time
3–5 days |
Condition
In stock |
Product image and identification notes
 |
What buyers should confirm in the photosUse front, rear and side photos to confirm IC755CSW07CDA-CL, screen condition, touch surface, revision label, power connector and all communication ports. Include the mounting clamps and gasket. Compare firmware, license and application versions before replacement. A seven-inch QuickPanel+ bezel does not by itself confirm software or control compatibility. Buyer tip: Request current screen, rear-label, connector and mounting photos before stock confirmation.
|
FAQ about IC755CSW07CDA-CL
|
Can IC755CSW07CDA-CL replace any seven-inch QuickPanel+?
No. Confirm the complete suffix, firmware, application, licenses, ports, panel cutout and control role. Screen size alone is not a compatibility test.
|
What must I back up before removing IC755CSW07CDA-CL?
Save the complete HMI/control project and record firmware, licenses, Ethernet and serial settings, user data and any removable-media content required by the application.
|
|
Does IC755CSW07CDA-CL use resistive touch?
The base seven-inch IC755CSW07CDA family is documented with projected-capacitive multi-touch. Verify the supplied-unit label and inspect the touch surface before ordering.
|
What power should I check for IC755CSW07CDA-CL?
Confirm a 24 V DC nominal source within the published ±20% range, correct polarity and protective earth. Also inspect the connector and cabinet ventilation.
|
|
Why might a replacement panel start but not run the machine?
The application, licenses, firmware, controller communications or network settings may be missing or incompatible. Hardware power-up does not restore the project automatically.
|
What information should I provide for an IC755CSW07CDA-CL quote?
Send the full nameplate, firmware and application versions, license details, port and cutout photos, project status, quantity and destination.
|
About PLCEXPORT
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components. We review model identity, visible condition and delivery details before quotation.
Recommended models
Published product links are grouped by brand; this selection is arranged specifically for the IC755CSW07CDA-CL page.
Allen-Bradley
GE
Others - other recommended brands
|
Schleicher XCx 300
|
Saia PCD3.M5560
|
Berghof C-PRO 13
|
KEB C6 COMPACT 2
|
|
Elrest CM211
|
Eaton XC-303
|
LS Electric XGB XEC
|
Panasonic FP7 CPS41E
|
|
AutomationDirect BRX BX-DM1E
|
Turck TBEN-L5-8DIP-8DOP
|
B&R X20CP0484
|
Beijer X2 control 15
|
|
ICP DAS XP-9188-IoT
|
Fatek FBs-32MCT2
|
Horner OCS HE-X10S
|
Lütze LOCC-Box-Net
|
|
Parker PAC320-CWB21-3X
|
Yaskawa MP3300iec
|
Nidec C200-044
|
Mitsubishi Alpha2 AL2-24MR-D
|
|
DIRECT SALES SUPPORT · FIELD CONTROL
Need a verified IC755CSW07CDA-CL for an installed I/O station?Share the nameplate, BIU revision, terminal-base photos, load details, quantity and destination. Myrtle will review the model identity and shipping requirements before quotation. |
|
| WhatsApp · +86 18950128464 | Email Myrtle · sales5@askplc.com |
Hot Tags: ge ic755csw07cda-cl quickpanel+ 7-inch view and control, China ge ic755csw07cda-cl quickpanel+ 7-inch view and control manufacturers, suppliers, GE Fanuc IC695CPE302, GE IC695CPE302, IC695CEP001, IC695CEP001 CEP Carrier Module, IC695CPE302, IC695CPE302 CPU module
