GE IC695PMM335 PACMotion Multi-Axis Motion Controller
RX3i PACMotion controller for coordinated digital-servo applications. Project, firmware, drive network and axis configuration must be verified together.
What matters when specifying IC695PMM335
Multi-axis motion roleExecutes motion functions alongside a PACSystems RX3i controller. |
Project-dependent hardwareAxis setup, drives, motors and network mapping belong to the stored machine project. |
Power-down fault contextA shutdown-correlated loss entry can be informational if the PMM335 is present after restart. |
Migration requires engineeringAnother motion module is not an automatic replacement; project and hardware support must be verified. |
Description and purpose
|
IC695PMM335 is a PACMotion controller for a PACSystems RX3i universal backplane. Official PACMotion documentation defines control for as many as four FANUC digital-servo axes plus one virtual/time-based or external-encoder master axis over a 50 Mb/s optical FSSB network. Motion planning is performed at 1 ms and the position loop at 500 µs. For replacement work, preserve the complete motion architecture: RX3i CPU firmware, PAC Machine Edition project, PMM firmware, FSSB node order, drives, motors, feedback, tuning, homing and limit settings. The documented optical-distance limits are up to 100 m per node and 400 m for four axes. Do not select a different motion module merely because it occupies an RX3i slot. |
Purchase verificationSend the complete IC695PMM335 label, CPU and backplane models, module and CPU firmware, PAC Machine Edition project version, connected drives, axis count and fault history. We will compare the configured motion architecture before quotation. |
Technical specifications
Values restated from GE/Emerson PACMotion product documentation and CPU IPI GFK-2714. Confirm the complete supplied-unit nameplate and applicable revision before final selection.
Planning a IC695PMM335 replacement or new installation?
Send the complete IC695PMM335 label, CPU and backplane models, module and CPU firmware, PAC Machine Edition project version, connected drives, axis count and fault history. We will compare the configured motion architecture before quotation.
Sales Manager: MyrtleCompatibility review before quotationApplications
Controls motion sequences requiring multiple configured servo axes.
Supports repeatable motion when the complete PACMotion project is retained.
Replaces a verified PMM335 after firmware and project comparison.
Separates documented shutdown events from persistent module or network faults.
Ordering information
T/T
Xiamen
3–5 days
In stock
Product image and identification notes
What buyers should verify in the photos
Use clear front, side and connector views to confirm the complete IC695PMM335 identity, suffix, revision, terminal or port arrangement, housing condition and installed accessories.
For an installed-system replacement, compare the photographed unit with the project hardware catalog and the component being removed. Appearance alone does not prove interchangeability.
FAQ about IC695PMM335
Can I replace IC695PMM335 with another PACMotion module that fits the same backplane?
No. Physical fit does not establish compatibility. IC695PMM335 uses a 50 Mb/s optical FSSB architecture; verify CPU firmware, project target, drives, axis count, motors, feedback and safety design before migration.
How many axes can IC695PMM335 control?
Official PACMotion documentation specifies up to four FANUC digital servo axes plus one virtual/time-based or external-encoder master axis. Confirm the actual licensed and configured project before replacement.
What must be backed up before removing IC695PMM335?
Save the complete RX3i and motion project, firmware records, drive and motor data, axis tuning, homing and limit settings, network map and relevant fault history.
What should I check if IC695PMM335 is not present after power-up?
Check seating and backplane power, hardware configuration, CPU and module firmware, fault tables and the motion network. A persistent missing module is different from the documented shutdown-only entry.
Which installed-system details are most important for a quote?
Provide the full PMM335 and CPU labels, backplane, firmware, PAC Machine Edition version, drives and axes, quantity, destination and clear photos of the module and connectors.
How are availability and shipment handled for this legacy motion component?
After model verification, we can confirm available supply, prepare protective packaging for the electronics and provide shipment and after-sales support under the quoted terms. Final compatibility remains tied to the verified project.
Practical support for automation-parts sourcing
PLCEXPORT supports maintenance, engineering and procurement teams with model verification, responsive quotations and coordinated international supply.
Recommended models
Published PLCEXPORT product links have been refreshed and regrouped for this IC695PMM335 page.
Allen-Bradley
| 1771-OMD | 1762-IQ16 | 1734-EP24DC | 1769-CRL1 |
| 1747-M13 | 1747-L543 | 1747-L551 | 1769-IQ16 |
| 1794-IA8 | 1747-M12 | 1746-OW16 | 1746-IM16 |
| 1747-SN | 1746-A7 | 1756-M16SE | 1756-IV32 |
| 1769-OB8 | 1794-IB32 | 1794-OB32P | 1756-ENBT |
GE
Others - other recommended brands
|
Elmo G-MAS
|
Festo CPX-E-CEC
|
Gefran GFX4-IR
|
Jetter JC-440
|
|
Kontron KBox-A-150
|
Lenze c550
|
Nidec C200-064
|
PMA KS98-2
|
|
Sorel XHCC
|
Toshiba V200-16MR
|
Teco SG2-20VR
|
Wieland samosPRO
|
|
Zander TALOS-TB
|
Crouzet em4-remote
|
Hitachi EH-150
|
Unitronics USC-B10-T24
|
|
Horner HE-XE105
|
Fatek FBs-40MA
|
ICP DAS WP-8441
|
B&R X20CP1586
|
Confirm the exact IC695PMM335 before ordering
Share the full nameplate, installed configuration, clear connector or terminal photos, quantity and destination. Myrtle will review model identity and compatibility points before quotation.
The complete IC695PMM335 identity is checked rather than the base number alone.
Controller, carrier, rack, wiring or project details are compared before replacement.
Current product, label and connector photos reduce mismatch risk.
Quantity, destination, protective packing and shipment requirements are confirmed.
Hot Tags: ge ic695pmm335 pacmotion multi-axis motion controller, China ge ic695pmm335 pacmotion multi-axis motion controller manufacturers, suppliers, GE Fanuc IC695CEP001, GE IC695CEP001, ge pac systems rx3i, IC695CEP001, IC695CEP001 CEP Carrier Module, IC695CPE302
