GE IC695CPU315 PACSystems RX3i CPU Module

GE IC695CPU315 PACSystems RX3i CPU Module

GE · PACSYSTEMS RX3I
GE IC695CPU315 PACSystems RX3i CPU Module

A two-slot PACSystems RX3i CPU with a 1 GHz Intel Celeron M processor, 20 MB user memory and two independent onboard serial ports.

New & originalOne-year warranty3–5 daysCondition: In stock
Sales Manager: Myrtle
Email: sales5@askplc.com
Call or Whatsapp: +86-18950128464
Send Inquiry
Description
GE · PACSYSTEMS RX3I

GE IC695CPU315 PACSystems RX3i CPU Module

A two-slot PACSystems RX3i CPU with a 1 GHz Intel Celeron M processor, 20 MB user memory and two independent onboard serial ports.

New & original
One-year warranty
3–5 days
Condition: In stock
Request a quote

Description and purpose

IC695CPU315 executes the control program in an RX3i universal backplane and supports both high-speed PCI-based IC695 modules and serial-backplane IC694 modules. It has no embedded Ethernet port; an IC695ETM001 rack module is required when the application needs Ethernet communications. For a maintenance replacement, users should confirm project size, CPU firmware, rack power, slot position, battery condition and the wiring assigned to COM1 and COM2.

Technical specifications

GE PACSystems CPU Reference Manual GFK-2222; PACSystems RX3i System Manual GFK-2314; Important Product Information GFK-2714

Model
IC695CPU315
Manufacturer
GE
Country of origin
United States
Product family
PACSystems RX3i
Processor
1 GHz Intel Celeron M
Operating system
VxWorks
User memory
20 MB
Module width
2 RX3i slots
Backplane support
PCI-based IC695 and serial-backplane IC694 modules
Serial interfaces
2 independent onboard ports: COM1 and COM2
Ethernet
No embedded Ethernet; use IC695ETM001 when required
Operating temperature
0–60 °C
Installation position
Rack 0; any two-slot pair except the two highest-numbered slots
Reference
GFK-2222; GFK-2314; GFK-2714
CONFIGURATION SUPPORT

Replacing an IC695CPU315 without disturbing the existing project?

Send Sales Manager: Myrtle the full nameplate, firmware revision, rack and slot position, PAC Machine Edition project size, COM1/COM2 use, battery status and fault symptoms. We will review these points before quotation so a visually similar but incompatible CPU is not selected.

Sales Manager: MyrtleProject and firmware reviewRack and serial-port check

Applications

Installed RX3i machine control

Use when the existing project, rack and I/O architecture are built around the CPU315 hardware profile.

Serial-device integration

Suitable for systems using the onboard COM ports for programmer, HMI or supported serial-device communication.

Controlled maintenance replacement

Appropriate when the full catalog label, firmware, project memory demand and backplane arrangement have been checked.

Ordering information

Payment
T/T
Port
Xiamen
Lead time
3–5 days
Condition
In stock
BUYER QUESTIONS

FAQ about IC695CPU315

Can IC695CPU315 replace IC695CPU320 without changing my RX3i project?
Do not treat the two catalog numbers as automatic substitutes. IC695CPU315 provides 20 MB user memory, while IC695CPU320 provides 64 MB. Check the compiled project size, retained data, firmware, option modules and serial-port configuration before deciding whether the smaller CPU is suitable.
Why can I not plug an Ethernet cable directly into IC695CPU315?
IC695CPU315 does not include an embedded Ethernet interface. An RX3i system that needs Ethernet communications uses a compatible rack-mounted Ethernet module such as IC695ETM001. Confirm the installed network module and its configuration rather than assuming the CPU itself supplies the port.
What should I record before removing a running IC695CPU315?
Archive the PAC Machine Edition project and hardware configuration, record the CPU firmware, retained-data requirements, passwords, rack slot and battery condition, and document the COM1/COM2 wiring and parameters. This information is more useful than matching the front appearance alone.
Could 115.2 kbit/s serial operation cause intermittent faults on IC695CPU315?
GE product information notes that heavy interrupt loading can rarely affect serial data at 115.2 kbit/s and advises 57.6 kbit/s or lower for those applications. Review the actual program load and serial settings before blaming the cable or replacing the CPU.
Why should a two-wire EIA-485 multidrop network be reviewed before cycling IC695CPU315 power?
GE documentation identifies a possible interruption when CPU315/CPU320 Comm 2 ports share a two-wire multidrop network and one controller is power-cycled while another is communicating. Check topology, termination and the documented startup procedure before maintenance.
What physical details should match before I buy a replacement IC695CPU315?
Verify the complete catalog label, hardware revision, firmware, two-slot installation position, battery arrangement and both serial connectors. Also confirm that the existing rack has sufficient power and that the project does not depend on CPU320-level memory.

About PLCEXPORT

PLCEXPORT supports automation maintenance and project teams with model identification, practical compatibility checks and international supply coordination. Our China team reviews labels and order details before dispatch preparation.

 
Technical discussion
Our team compares system context, suffixes and interface details before quotation.
 
PLCEXPORT team
Colleagues coordinate identification, commercial follow-up and shipping details.
 
Packing inspection
Product identity and package condition are checked during order preparation.
 
China operations
Local coordination supports sourcing, documentation and international dispatch.

Recommended models

Published references are grouped by brand, and the mix below is arranged specifically for this IC695CPU315 page.

ABB - published product references

Siemens - published product references

Others - other recommended brands

Advantech APAX-5580
Lütze 716425
Elmo G-MAS
Festo CPX-E-CEC
Gefran GFX4-IR
Jetter JC-440
Kontron KBox-A-150
Lenze c550
Nidec C200-064
PMA KS98-2
Sorel XHCC
Toshiba V200-16MR
Teco SG2-20VR
Wieland samosPRO
Zander TALOS-TB
Crouzet em4-remote
Hitachi EH-150
Idec FT1A-H40RSA
QUOTATION SUPPORT

Looking for a hard-to-source automation component?

Send Myrtle the full product label, current system details, quantity and destination. We will help compare the identification and highlight the checks that matter before quotation.

Hot Tags: ge ic695cpu315 pacsystems rx3i cpu module, China ge ic695cpu315 pacsystems rx3i cpu module manufacturers, suppliers, GE Fanuc IC695CPE302, GE IC695CEP001, GE IC695CPE302, ge pac systems rx3i, IC695CEP001 CEP Carrier Module, IC695CPE302

Send Inquiry