GE IC200PWR102J VersaMax Expanded 3.3 V AC Power Supply
What matters when specifying IC200PWR102J
|
120/240 VAC input
Verify the voltage-selector jumper before applying mains power. |
Expanded 3.3 V output
Designed for VersaMax stations needing greater 3.3 V backplane capacity. |
Shared output budget
Calculate the combined 5 V and 3.3 V load for every module in the station. |
J-suffix identity
Match the complete IC200PWR102J nameplate; do not infer an undocumented electrical change. |
Description and purpose
|
IC200PWR102J supplies regulated 5 V DC and 3.3 V DC power to a VersaMax CPU or network interface and the modules in its station. The expanded 3.3 V capacity is useful only when the complete backplane load stays within the published combined output limit. Before replacement, record the input-voltage jumper, incoming mains wiring and the current draw of every connected module. The J suffix should remain part of the purchase identity; GE publishes electrical specifications under the IC200PWR102 family, so revision-specific changes must be confirmed from the supplied label. |
Purchase verificationSend the IC200PWR102J label, input voltage, jumper position, CPU or NIU model, full module list, quantity and destination. Myrtle will review the backplane power budget and stated revision before quotation.
|
Technical specifications
Values restated from GE VersaMax Modules, Power Supplies and Carriers documentation GFK-1504. Confirm the J-suffix nameplate and installed station load.
Replacing the power supply in a populated VersaMax station?
Share the IC200PWR102J nameplate, input voltage and jumper setting, CPU or NIU catalog number and the complete module list. We will review the stated power budget before quotation.
|
✓ Input-jumper review
|
✓ 3.3 V / 5 V load check
|
✓ Full nameplate confirmation
|
| Email Myrtle · sales5@askplc.com | Open WhatsApp · +86 18950128464 |
Applications
|
CPU stations
Power a VersaMax CPU and its local I/O after completing the load calculation. |
Networked I/O stations
Supply a supported NIU and attached modules within the output budget. |
Expanded 3.3 V demand
Support station configurations that require the PWR102 expanded 3.3 V capacity. |
Installed-system repair
Restore station power after confirming mains selection and module current. |
Ordering information
|
Payment
T/T |
Port
Xiamen |
Delivery time
3–5 days |
Condition
In stock |
Product image and identification notes
 |
What buyers should confirm in the photosUse clear front and side photos to confirm IC200PWR102J, the voltage-selector jumper, input terminals, PWR indicator and complete revision marking. Any heat damage or cracked terminals should be visible. For replacement work, compare the CPU or NIU label and every module in the station. The backplane power calculation matters more than a visually identical enclosure. Buyer tip: Request current photos of the nameplate, jumper and mains terminal area before stock confirmation.
|
FAQ about IC200PWR102J
|
Can IC200PWR102J replace any VersaMax AC power supply?
No. Confirm the IC200PWR102 family, input-voltage selection and the 5 V/3.3 V load of the installed station. A supply with the same shape may have a different output profile.
|
How should I set IC200PWR102J for 120 or 240 VAC?
Use the documented voltage-selector jumper before applying power: the published ranges are 85–132 VAC and 176–264 VAC. Never move the selector while energized.
|
|
How much backplane current can IC200PWR102J supply?
The combined 5 V and 3.3 V output is limited to 1.5 A, with up to 1.0 A at 3.3 V. Add the current requirements of every module before approving the configuration.
|
Why can a new IC200PWR102J still fail to start my station?
An incorrect voltage jumper, wiring error or excessive combined module load can prevent normal operation. Verify mains voltage, protective earth and the complete station power budget.
|
|
Does the J suffix prove different electrical ratings?
The full suffix is important for nameplate matching, but GE publishes the main specifications under IC200PWR102. Do not claim a J-specific rating unless the supplied-unit documentation states it.
|
What information should I send for an IC200PWR102J quote?
Provide the nameplate, input voltage, jumper position, CPU or NIU model, module list, quantity and destination. This allows the requested revision and power budget to be reviewed.
|
About PLCEXPORT
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components. We review model identity, visible condition and delivery details before quotation.
Recommended models
Published product links are grouped by brand; this selection is arranged specifically for the IC200PWR102J page.
Allen-Bradley
GE
Others - other recommended brands
|
Schleicher XCx 300
|
Saia PCD3.M5560
|
Berghof C-PRO 13
|
KEB C6 COMPACT 2
|
|
Elrest CM211
|
Eaton XC-303
|
LS Electric XGB XEC
|
Panasonic FP7 CPS41E
|
|
AutomationDirect BRX BX-DM1E
|
Turck TBEN-L5-8DIP-8DOP
|
B&R X20CP0484
|
Beijer X2 control 15
|
|
ICP DAS XP-9188-IoT
|
Fatek FBs-32MCT2
|
Horner OCS HE-X10S
|
Lütze LOCC-Box-Net
|
|
Parker PAC320-CWB21-3X
|
Yaskawa MP3300iec
|
Nidec C200-044
|
Mitsubishi Alpha2 AL2-24MR-D
|
|
DIRECT SALES SUPPORT · FIELD CONTROL
Need a verified IC200PWR102J for an installed I/O station?Share the nameplate, BIU revision, terminal-base photos, load details, quantity and destination. Myrtle will review the model identity and shipping requirements before quotation. |
|
| WhatsApp · +86 18950128464 | Email Myrtle · sales5@askplc.com |
Hot Tags: ge ic200pwr102j versamax expanded 3.3 v ac power supply, China ge ic200pwr102j versamax expanded 3.3 v ac power supply manufacturers, suppliers, GE Fanuc IC695CPE302, GE IC695CEP001, GE IC695CPE302, IC695CEP001, IC695CEP001 CEP Carrier Module, IC695CPE302 CPU module
