GE IC695NIU001 RX3i Ethernet Network Interface Unit

GE IC695NIU001 RX3i Ethernet Network Interface Unit

PACSystems RX3i · ETHERNET NIU

GE IC695NIU001 RX3i Ethernet Network Interface Unit

Ethernet NIU that makes RX3i and supported Series 90-30 I/O available to a controller through Ethernet Global Data.

New & originalOne-year warranty3–5 daysCondition: In stock
Send Inquiry
Description
PACSystems RX3i · ETHERNET NIU

GE IC695NIU001 RX3i Ethernet Network Interface Unit

Ethernet NIU that makes RX3i and supported Series 90-30 I/O available to a controller through Ethernet Global Data.

Description and purpose

IC695NIU001 controls a remote RX3i I/O station and exchanges its data with the supervisory PACSystems controller using Ethernet Global Data. The module is doublewide and is referenced by its leftmost backplane slot.

Confirm the EGD exchanges, controller and NIU firmware, I/O map, rack layout, Ethernet interface module and left-slot assignment before replacement. A matching part number does not recreate the station configuration.

Purchase verification

Send the complete IC695NIU001 label, installed-system details and project context. We will compare the supplied revision and interface before quotation.

Technical specifications

Values summarized from GE Fanuc PACSystems RX3i Ethernet NIU User's Manual GFK-2419. Confirm the complete IC695NIU001 nameplate for the supplied revision.

Model
IC695NIU001
Manufacturer
GE
Country of origin
United States
Product family
PACSystems RX3i
Product type
Ethernet Network Interface Unit
Network role
Remote Ethernet I/O station controller
Data protocol
Ethernet Global Data (EGD)
Controller-to-NIU output data
Up to 1300 bytes
NIU-to-controller input data
Up to 1300 bytes
Backplane footprint
Doublewide; occupies two slots
Slot reference
Configured by leftmost occupied slot
Serial ports
Two service/communications ports
Status display
Eight NIU status LEDs
Battery
IC698ACC701
Firmware
Field upgradeable
CONFIGURATION SUPPORT

Planning a Ethernet remote I/O station replacement?

Share the complete IC695NIU001 nameplate, installed hardware details, configuration, quantity and destination with Sales Manager: Myrtle. We will review the stated application and flag details that still need confirmation.

Sales Manager
Myrtle
Model review
Suffix and revision
System check
Before quotation

Applications

Remote RX3i I/O stations

Use the documented configuration and confirm installed-system compatibility before replacement.

Series 90-30 I/O migration over Ethernet

Use the documented configuration and confirm installed-system compatibility before replacement.

Distributed plant I/O integration

Use the documented configuration and confirm installed-system compatibility before replacement.

Ordering information

Payment
T/T
Port
Xiamen
Lead time
3–5 days
Condition
In stock
BUYER QUESTIONS

FAQ about GE IC695NIU001

How do I know whether IC695NIU001 is the correct replacement for my installed hardware?

Compare the complete nameplate, suffix, rack position, firmware or revision information, field connections and the project configuration. For a Ethernet remote I/O station, matching only the base family can leave an interface or configuration mismatch.

What information should I send before requesting a quotation for IC695NIU001?

Send clear front and side label photos, the controller or rack model, installed slot, connected devices, required quantity, destination and a short description of the fault. These details let us check the supplied revision against the actual system.

Can I install IC695NIU001 without changing the PLC project?

Do not assume a drop-in exchange. Preserve the existing hardware configuration and operating parameters, then verify the replacement revision in the applicable GE engineering software and manual before energizing the rack.

Which installation detail causes the most trouble with IC695NIU001?

The common risk is overlooking the exact connector, termination, slot, firmware or mode that the existing application relies on. Photograph wiring and record software settings before removal so the replacement can be restored methodically.

What should maintenance teams check when IC695NIU001 is received?

Inspect the full catalog number and suffix, connector condition, housing, labels and package condition. Compare these with the purchase record before installation; do not use appearance alone to approve interchangeability.

Which documentation should be reviewed for IC695NIU001?

Use GE Fanuc PACSystems RX3i Ethernet NIU User's Manual GFK-2419. The equipment nameplate and the installed project remain the final references because manuals can cover several revisions and configurations.

About PLCEXPORT

PLCEXPORT supports automation maintenance and project teams with model identification, compatibility checks and international supply coordination. Our China team reviews labels and order details before dispatch preparation.

 
Technical discussion

Our team compares system context, suffixes and interface details before quotation.

 
PLCEXPORT team

Colleagues coordinate identification, commercial follow-up and shipping details.

 
Packing inspection

Product identity and package condition are checked during order preparation.

 
China operations

Local coordination supports sourcing, documentation and international dispatch.

Recommended models

Published product references are grouped by brand; each card shows the model only.

GE - published product references

HONEYWELL - published product references

Others - other recommended brands

Zander TALOS-TB
Crouzet em4-remote
Hitachi EH-150
Idec FT1A-H40RSA
Koyo DL06
Murrelektronik Cube67
Pilz PNOZmulti 2
Unitronics USC-B10-T24
ICP DAS WP-8441
Fatek FBs-40MA
B&R X20CP1586
Opto 22 GRV-EPIC-PR2
Beckhoff CX9020-0111
Weidmuller u-control 2000
VIPA 315-4NE13
Delta DVP28SV11R2
Phoenix Contact AXC F 2152
Bosch Rexroth XM21
Wago PFC200
Bachmann MX213
Keba C5-IPC
Aaeon BOXER-6641
Advantech APAX-5580
Lütze 716425
Elmo G-MAS
Festo CPX-E-CEC
Gefran GFX4-IR
Jetter JC-440

Need help sourcing IC695NIU001?

Share the complete model, suffix, quantity and destination with Myrtle for a configuration-aware supply check.

↑ BACK UP TO THE TOP

Hot Tags: ge ic695niu001 rx3i ethernet network interface unit, China ge ic695niu001 rx3i ethernet network interface unit manufacturers, suppliers, GE Fanuc IC695CPE302, GE IC695CEP001, GE IC695CPE302, IC695CEP001, IC695CEP001 CEP Carrier Module, IC695CPE302 CPU module

Send Inquiry