GE IC200ALG264L 15-Channel Current Input Module
Fifteen-channel single-ended VersaMax analog input module for 4–20 mA or 0–20 mA current signals.
Description and purpose
IC200ALG264L accepts fifteen single-ended current inputs in one group. The default range is 4–20 mA; installing the range-selection jumper changes operation to 0–20 mA.
For process-loop replacement, verify the L suffix, selected range, jumper position, transmitter power arrangement and common wiring. Open-wire diagnostics are available only in 4–20 mA mode, which affects how loop faults are detected.
Send a clear nameplate and connector photo. We will compare the full suffix and installed interface before quotation.
Technical specifications
Concise values checked against GE VersaMax Modules, Power Supplies and Carriers User Manual GFK-1504Q. Final selection must follow the complete order code and installed system.
Seeing unstable or open analog loops after a module change?
Send Myrtle the IC200ALG264L label, range-jumper photo, loop drawings, transmitter type and power arrangement, measured current, channel symptoms, quantity and destination. We will review the range and common wiring before quotation.
Applications
Ordering information
T/T
Xiamen
3–5 days
In stock
Product image and identification notes
Confirm the range jumper, terminal map and L suffix
Ask for clear photos of the IC200ALG264L label, range-selection jumper, terminal numbering and connector condition. Fifteen single-ended channels share one group, so the common and transmitter wiring must be compared carefully with the existing loop drawings.
FAQ about IC200ALG264L
How do I select 4–20 mA or 0–20 mA on IC200ALG264L?
The module defaults to 4–20 mA. Installing the specified range-selection jumper changes it to 0–20 mA, so photograph and record the jumper before replacement.
Why does IC200ALG264L open-wire detection work on some loops but not others?
The documented open-wire diagnostic applies in 4–20 mA mode. It is not available in the same way when the module is configured for 0–20 mA.
Are the 15 IC200ALG264L channels isolated from each other?
No. They are single-ended channels in one group with no channel-to-channel isolation. Review common potential and grounding to prevent measurement errors.
What input resistance will the transmitter see on IC200ALG264L?
The specified input impedance is 100 ohms. Include that burden, cable resistance and any other loop devices when checking available transmitter compliance voltage.
How quickly does IC200ALG264L update all process inputs?
The documented update rate is 7.5 ms with a 24 Hz input filter. The control strategy and PLC scan add further delay to the end-to-end response.
What should I send to confirm an IC200ALG264L replacement?
Provide the complete L-suffix label, jumper position, loop drawings, current range, transmitter power arrangement, grounding/common scheme, channel symptoms and connector photos.
Automation-parts support from China
PLCEXPORT helps maintenance and project teams identify active and legacy PLC/DCS components through label review, configuration checks and practical shipment coordination.
Recommended models
Published product references are grouped by brand; each card shows the model only. The selection below is unique to this product page.
Honeywell - published product references
Bently Nevada - published product references
Others - other recommended brands
Need a compatibility check before ordering?
Send Myrtle the complete model, suffix, quantity, installed-system details and destination. Clear photos help us narrow down a suitable supply option.
Hot Tags: ge ic200alg264l 15-channel current input module, China ge ic200alg264l 15-channel current input module manufacturers, suppliers
