GE IC695NIU001-DN RX3i Ethernet Network Interface Unit

GE IC695NIU001-DN RX3i Ethernet Network Interface Unit

PACSystems RX3i · ETHERNET NIU REVISION DN

GE IC695NIU001-DN RX3i Ethernet Network Interface Unit

DN-revision RX3i Ethernet NIU for EGD-based remote I/O stations and firmware-managed replacement work.

New & originalOne-year warranty3–5 daysCondition: In stock
Send Inquiry
Description
PACSystems RX3i · ETHERNET NIU REVISION DN

GE IC695NIU001-DN RX3i Ethernet Network Interface Unit

DN-revision RX3i Ethernet NIU for EGD-based remote I/O stations and firmware-managed replacement work.

Description and purpose

IC695NIU001-DN is a revision-controlled IC695NIU001 Ethernet NIU. It manages the local RX3i I/O rack and moves the configured I/O data to and from a PACSystems controller over EGD.

The -DN suffix and installed firmware matter when replacing a working station. Record the full nameplate, firmware, Ethernet module, EGD production/consumption settings and backplane slot map before removing the existing NIU.

Purchase verification

Send the complete IC695NIU001-DN label, installed-system details and project context. We will compare the supplied revision and interface before quotation.

Technical specifications

Values summarized from GE Fanuc PACSystems RX3i Ethernet NIU User's Manual GFK-2419N. Confirm the complete IC695NIU001-DN nameplate for the supplied revision.

Model
IC695NIU001-DN
Manufacturer
GE
Country of origin
United States
Product family
PACSystems RX3i
Product type
Ethernet Network Interface Unit, revision DN
Catalog number
IC695NIU001-DN
Platform
PACSystems RX3i
Function
EGD remote I/O station controller
Data capacity
Up to 1300 bytes in each direction
Mechanical width
Two backplane slots
Configured position
Leftmost occupied slot
Firmware family
DN nameplate; verify installed release
Upgrade method
Field-upgradeable firmware
Required engineering check
EGD exchanges and I/O map
Battery option
IC698ACC701
CONFIGURATION SUPPORT

Planning a revision-specific Ethernet NIU replacement?

Share the complete IC695NIU001-DN nameplate, installed hardware details, configuration, quantity and destination with Sales Manager Myrtle. We will review the stated application and flag details that still need confirmation.

Sales Manager
Myrtle
Model review
Suffix and revision
System check
Before quotation

Applications

Revision-matched NIU replacement

Use the documented configuration and confirm installed-system compatibility before replacement.

Remote rack firmware maintenance

Use the documented configuration and confirm installed-system compatibility before replacement.

EGD I/O station recovery

Use the documented configuration and confirm installed-system compatibility before replacement.

Ordering information

Payment
T/T
Port
Xiamen
Lead time
3–5 days
Condition
In stock
BUYER QUESTIONS

FAQ about GE IC695NIU001-DN

How do I know whether IC695NIU001-DN is the correct replacement for my installed hardware?

Compare the complete nameplate, suffix, rack position, firmware or revision information, field connections and the project configuration. For a revision-specific Ethernet NIU, matching only the base family can leave an interface or configuration mismatch.

What information should I send before requesting a quotation for IC695NIU001-DN?

Send clear front and side label photos, the controller or rack model, installed slot, connected devices, required quantity, destination and a short description of the fault. These details let us check the supplied revision against the actual system.

Can I install IC695NIU001-DN without changing the PLC project?

Do not assume a drop-in exchange. Preserve the existing hardware configuration and operating parameters, then verify the replacement revision in the applicable GE engineering software and manual before energizing the rack.

Which installation detail causes the most trouble with IC695NIU001-DN?

The common risk is overlooking the exact connector, termination, slot, firmware or mode that the existing application relies on. Photograph wiring and record software settings before removal so the replacement can be restored methodically.

What should maintenance teams check when IC695NIU001-DN is received?

Inspect the full catalog number and suffix, connector condition, housing, labels and package condition. Compare these with the purchase record before installation; do not use appearance alone to approve interchangeability.

Which documentation should be reviewed for IC695NIU001-DN?

Use GE Fanuc PACSystems RX3i Ethernet NIU User's Manual GFK-2419N. The equipment nameplate and the installed project remain the final references because manuals can cover several revisions and configurations.

About PLCEXPORT

PLCEXPORT supports automation maintenance and project teams with model identification, compatibility checks and international supply coordination. Our China team reviews labels and order details before dispatch preparation.

 
Technical discussion

Our team compares system context, suffixes and interface details before quotation.

 
PLCEXPORT team

Colleagues coordinate identification, commercial follow-up and shipping details.

 
Packing inspection

Product identity and package condition are checked during order preparation.

 
China operations

Local coordination supports sourcing, documentation and international dispatch.

Recommended models

Published product references are grouped by brand; each card shows the model only.

GE - published product references

HONEYWELL - published product references

Others - other recommended brands

Koyo DL06
Murrelektronik Cube67
Pilz PNOZmulti 2
Unitronics USC-B10-T24
ICP DAS WP-8441
Fatek FBs-40MA
B&R X20CP1586
Opto 22 GRV-EPIC-PR2
Beckhoff CX9020-0111
Weidmuller u-control 2000
VIPA 315-4NE13
Delta DVP28SV11R2
Phoenix Contact AXC F 2152
Bosch Rexroth XM21
Wago PFC200
Bachmann MX213
Keba C5-IPC
Aaeon BOXER-6641
Advantech APAX-5580
Lütze 716425
Elmo G-MAS
Festo CPX-E-CEC
Gefran GFX4-IR
Jetter JC-440
Kontron KBox-A-150
Lenze c550
Nidec C200-064
PMA KS98-2

Need help sourcing IC695NIU001-DN?

Share the complete model, suffix, quantity and destination with Myrtle for a configuration-aware supply check.

↑ BACK UP TO THE TOP

Hot Tags: ge ic695niu001-dn rx3i ethernet network interface unit, China ge ic695niu001-dn rx3i ethernet network interface unit manufacturers, suppliers, GE Fanuc IC695CEP001, GE Fanuc IC695CPE302, GE IC695CEP001, IC695CEP001, IC695CEP001 CEP Carrier Module, IC695CPE302

Send Inquiry