8618950128464
sales5@askplc.com
enEnglish
GE IC694ALG390C RX3i 2-Channel Analog Voltage Output Module

GE IC694ALG390C RX3i 2-Channel Analog Voltage Output Module

GE PACSYSTEMS RX3i ANALOG OUTPUT
IC694ALG390C RX3i 2-Channel Analog Voltage Output Module
Two-channel RX3i analog voltage output module: −10 to +10 V, 2.5 mV per count, approximately 5 ms update for both channels and 5 mA maximum output load.
New & original
One-year warranty
3–5 days
Condition: In stock
Send Inquiry
Description
GE PACSYSTEMS RX3i ANALOG OUTPUT

GE IC694ALG390C RX3i 2-Channel Analog Voltage Output Module

Two-channel analog voltage output module for command and setpoint signals in PACSystems RX3i systems.

New & original
One-year warranty
3–5 days
Condition: In stock
Request a quote

Description and purpose

The requested nameplate is IC694ALG390C. GE's official RX3i documentation identifies the base IC694ALG390 as a two-channel analog voltage output module. Each channel provides a −10 to +10 V command signal with 2.5 mV per count resolution; the approximate update time for both channels is 5 ms and is application dependent.

The output load is limited to 5 mA, requiring at least 2 kΩ, and the module uses 32 mA from the +5 VDC supply plus 120 mA from the isolated +24 VDC supply. Treat C as part of the complete nameplate and verify it against project records; do not infer interchangeability from the IC694ALG390 base number alone.

Purchase verificationConfirm IC694ALG390C on the label, then compare the official −10 to +10 V range, 5 mA maximum load, terminal assignments and both channel commons with the installed project.

Technical specifications

Values summarized from GE IC694ALG390 analog-output documentation and PACSystems RX3i hardware references. Final selection must follow the complete catalog number and installed system.

Model
IC694ALG390C
Manufacturer
GE
Official base part
IC694ALG390
Product family
PACSystems RX3i
Product type
Analog voltage output module
Output channels
2
Output range
−10 to +10 VDC
Resolution
2.5 mV per count
Update time
Approx. 5 ms for both channels; application dependent
Output loading
5 mA maximum; 2 kΩ minimum resistance
External supply
18–30 VDC; 10% maximum ripple
Current consumption
32 mA at +5 VDC; 120 mA at isolated +24 VDC
VOLTAGE OUTPUT CHECK

Need to replace a two-channel voltage card without disturbing the process?

Send Myrtle the complete IC694ALG390C label, terminal-block photo, receiving-device input resistance, channel wiring, rack details, quantity and destination. We will compare the request with the official −10 to +10 V range, 5 mA load limit, power requirements and project scaling before quotation.

Sales Manager: MyrtleConfiguration review before quotation

Applications

Drive references, actuator commands, analog setpoints, test equipment and compact process skids requiring two voltage output channels in an RX3i installation.

Ordering information

PaymentT/T
PortXiamen
Lead time3–5 days
ConditionIn stock
BUYER QUESTIONS

FAQ about IC694ALG390C

Can IC694ALG390C replace a current-output analog module?
No. IC694ALG390 is a voltage-output module. Match the receiving device and configured output range; a 4–20 mA loop requires a current-output design or an engineered conversion.
What should I check if an IC694ALG390C output remains at zero?
Review channel configuration, output command, field wiring, common reference, receiving-device input and module diagnostics. Test with a suitable meter while the process is in a safe state.
Is the C suffix relevant when ordering IC694ALG390C?
Yes. Keep the complete IC694ALG390C marking in the request and compare the label with the installed BOM and project documentation. The technical values on this page are verified against the official base IC694ALG390 documentation; the C-marked unit still requires revision-level confirmation.
Can I move the existing terminal block to another IC694ALG390C?
Only after verifying the terminal part number, channel assignments and connector condition. Isolate the controlled equipment before disconnecting or reconnecting analog outputs.
How can I avoid an unexpected actuator movement after replacement?
Place the process in a safe state, confirm scaling and output limits, reconnect wiring with outputs disabled, then commission each channel under the plant procedure.
What should I provide for an IC694ALG390C quotation?
Send the full label, terminal-block photo, two channel ranges, connected loads, rack type, quantity and destination. Mention whether the module is an emergency replacement.

About PLCEXPORT

PLCEXPORT supports automation maintenance and project teams with model identification, practical compatibility checks and international supply coordination. Our China team reviews labels and order details before dispatch preparation.

 
Technical discussion
Our team compares system context, suffixes and interface details before quotation.
 
PLCEXPORT team
Colleagues coordinate identification, commercial follow-up and shipping details.
 
Packing inspection
Product identity and package condition are checked during order preparation.
 
China operations
Local coordination supports sourcing, documentation and international dispatch.

Need a documented compatibility check?

Send the complete IC694ALG390C identification, quantity, destination and installed-system details to Myrtle. We will review the request before quotation and help identify any suffix, terminal, firmware or configuration point that still needs confirmation.

EmailWhatsApp

Hot Tags: ge ic694alg390c rx3i 2-channel analog voltage output module, China ge ic694alg390c rx3i 2-channel analog voltage output module manufacturers, suppliers, GE Fanuc IC695CEP001, GE Fanuc IC695CPE302, GE IC695CEP001, ge pac systems rx3i, IC695CEP001, IC695CEP001 CEP Carrier Module

You Might Also Like
Send Inquiry