Siemens 6EP1437-3BA00 Stabilized Power Supply
Siemens 6EP1437-3BA00 is a SITOP modular stabilized power supply with a 3 AC 400–500 V input and a regulated 24 V DC / 40 A output.
Description and purpose
Siemens 6EP1437-3BA00 is a SITOP modular stabilized power supply with a 3 AC 400–500 V input and a regulated 24 V DC / 40 A output. It supplies regulated 24 V DC control power to compatible industrial automation equipment. Siemens lists 6EP3437-8SB00-0AY0 as a comparable successor. Confirm the complete order code and installed-system compatibility before replacement.
Trying to replace a difficult-to-source control module?
Send Myrtle the complete 6EP1437-3BA00 nameplate, suffix or product ID, installed system and required quantity. We will organize the configuration details before quoting.
Application scenarios
Industrial 24 V DC control power
Use within the published output rating.
Three-phase control cabinets
Confirm the available 400–500 V AC input.
40 A automation loads
Calculate continuous load and inrush current.
SITOP modernization
Check successor dimensions, terminals and approvals.
Ordering information
T/T
Xiamen
3–5 days
In stock
Product image and identification notes
Use the image as a visual reference only. Final selection must be based on the complete nameplate, suffix or product ID and the installed system configuration.

What buyers should verify
Compare every visible identification detail with the installed unit before authorizing shipment. Similar housings can contain different electrical ratings or system interfaces.
FAQ about Siemens 6EP1437-3BA00
Can Siemens 6EP1437-3BA00 be connected to a single-phase supply during a replacement?
No. Siemens specifies a three-phase AC input of 400–500 V with a 47–63 Hz line-frequency range. Confirm the incoming supply and upstream protection before installation.
Will Siemens 6EP1437-3BA00 deliver 40 A if I adjust the output above 24 V?
The supply is rated 24 V DC at 40 A and its output can be adjusted from 24 to 28.8 V, with a maximum output power of 960 W. The connected load must remain within the permitted voltage, current and power limits.
What should I know about the lifecycle of Siemens 6EP1437-3BA00 before ordering a spare?
Siemens marks the product as being in phase-out and lists 6EP3437-8SB00-0AY0 as a successor. For a retrofit, verify terminals, mounting, dimensions, protection and system behavior rather than assuming a drop-in swap.
Can two Siemens 6EP1437-3BA00 power supplies be paralleled to increase available current?
Siemens technical data permits two units in parallel for power increase. The paralleling arrangement, conductor sizing and load sharing should be engineered according to the SITOP documentation.
How does Siemens 6EP1437-3BA00 respond to overload or a short circuit?
The unit is specified as short-circuit proof and supports a constant-current characteristic of about 46 A or a latching shutdown mode. Status LEDs indicate normal operation, overload and latching shutdown conditions.
What thermal margin should I allow for Siemens 6EP1437-3BA00 in a warm control cabinet?
Siemens specifies operation from 0 to 70 °C with natural convection, but output-current derating of 2% per kelvin applies from 60 to 70 °C. Check cabinet temperature, ventilation and load before relying on the full 40 A rating.
Coordinated support from PLCEXPORT China
PLCEXPORT assists maintenance and project teams with model identification, quotation coordination and international automation-parts supply.
Our team, workplace and order preparation
Recommended Models
6SL3000-0EH41-4AA0Siemens
6SE7032-7EB87-2DA1Siemens
6EP1437-3BA00Siemens
6SE7031-6EB87-2DA1Siemens
6SE7032-1HB87-2DA1Siemens
6SL3300-1AE32-5AA0Bently Nevada
3500/42M 140734-02Bently Nevada
330180-X1-CN 145004-82Bently Nevada
330907-05-30-10-02-CNBently Nevada
330103-00-06-10-01-00Bently Nevada
330104-00-05-10-11-00Bently Nevada
200350-02-00-CN
Other Brands
Hot Tags: siemens 6ep1437-3ba00 stabilized power supply, China siemens 6ep1437-3ba00 stabilized power supply manufacturers, suppliers, 16147 51 1 ACM Transition Board, 16413 16 01 Siemens, Moore 16413 16 01, Siemens 16147 51 1, siemens moore, Siemens Moore 16413 16 01

