Emerson VE4035S2B1 DeltaV Redundant HART Analog Output

Emerson VE4035S2B1 DeltaV Redundant HART Analog Output

Emerson · DeltaV M-series 8-Channel Redundant 4-20 mA HART Analog Output Interface
VE4035S2B1
Eight-channel redundant 4-20 mA HART analog output interface for compatible DeltaV M-series control systems.
Condition
Original new unit; confirm current availability
MOQ
1 piece
Warranty
1 year
Availability
Confirm current stock
Weight
Verify complete redundant assembly and product labels
Dimensions
Verify complete two-wide redundant assembly; common single-interface envelope is 107 × 41 × 105 mm (H × W × D)
Origin
Verify product labels
Ships from
Xiamen, Fujian, China
SALES MANAGER
Cristina
Send the model, quantity and destination for a faster quotation.
Send Inquiry
Description
8-CHANNEL · REDUNDANT · HART ANALOG OUTPUT

VE4035S2B1 at a Glance

VE4035S2B1 provides the redundant standard-termination arrangement for eight 4-20 mA HART output channels in DeltaV M-series Traditional I/O. Confirm the two-wide redundant assembly, matched cards, loop load, cabinet clearance and software revision before ordering.

Emerson Specifications and Ordering Details

Product code
VE4035S2B1
Product family
DeltaV M-series Traditional I/O
I/O function
Redundant HART analog output
Number of channels
8
Nominal / full signal range
4-20 mA / 1-23 mA
Termination block
Redundant standard I/O termination block
Redundancy behavior
Active and standby cards recognized automatically on a two-wide redundant terminal block
Switchover behavior
Within two I/O-bus scans; both analog output cards drive the signal for less than 5 ms
Isolation
Each channel optically isolated from the system; factory tested to 1500 VDC
LocalBus current
100 mA typical, 150 mA maximum per card at 12 VDC nominal
Field-circuit power
300 mA maximum per card at 24 VDC ±10%
Accuracy / resolution
0.25% of span over temperature / 12-bit
Output compliance
20 mA into a 700 ohm load at 21.6 VDC supply
Compatibility / identification
DeltaV v10.3.1 or later; MQ, MX or PK controller with M-series carrier; verify complete assembly dimensions and labels

Confirm the complete order code and product label before purchase or replacement.

Buyer and Engineering Checks

Confirm redundancy is required

Select VE4035S2B1 only when the project requires the redundant standard I/O termination configuration rather than a simplex or fused arrangement.

Verify the complete assembly

Confirm the two-wide redundant terminal block, matched card pair, M-series carrier and available cabinet width; verify supplied contents in the quotation.

Review switchover behavior

Confirm that the process can accept switchover within two I/O-bus scans and the documented analog dual-drive period of less than 5 ms.

Check loops and software

Verify loop resistance, 24 VDC field-power capacity, DeltaV v10.3.1 or later and the complete code on the product label.

VE4035S2B1 Product View

Reference image for VE4035S2B1 inquiry; not an identification of the requested part

Identification checklist

Match the complete model and order code, product label, terminal layout, power requirements and platform compatibility. A similar enclosure does not prove interchangeability.

Typical Applications

Critical valve-positioning loops requiring higher analog-output availability.
Redundant 4-20 mA commands to compatible process actuators and I/P converters.
HART-enabled field-device control in high-availability DeltaV systems.
Modernization of existing redundant M-series analog-output assemblies.

VE4035S2B1 FAQ

Is VE4035S2B1 the redundant version of VE4005S2B1?

Both serve eight-channel 4-20 mA HART output duties, but VE4035S2B1 specifies the redundant standard I/O termination-block configuration.

How does the redundant arrangement switch after a fault?

The controller identifies the active and standby cards and switches automatically after a detected fault. Emerson states that switchover completes within two I/O-bus scans.

Is VE4035S2B1 a safety-system output?

The official PDS identifies it as redundant Traditional I/O, not as a safety-rated SIS output. Verify any required safety approval separately.

What information speeds up a VE4035S2B1 quotation?

Send the exact VE4035S2B1 catalog number, quantity, destination, required delivery date and any replacement or compatibility notes.

Is availability shown live on this page?

No. Current availability, supplied condition, included accessories and lead time are confirmed in the written quotation.

What warranty is offered?

A one-year supplier warranty is offered, subject to the written quotation and warranty terms.

Company and Export Support

Moore Automation company 1Moore Automation company 2Moore Automation company 3Moore Automation company 4

We support industrial automation sourcing with model verification, product photography and export coordination. Send the model, quantity, destination and requested delivery date for a focused quotation.

Request a VE4035S2B1 Quotation

For a faster response, include quantity, destination, required delivery date and any replacement or compatibility notes.

WhatsApp Quote
VE4035S2B1

Hot Tags: emerson ve4035s2b1 deltav redundant hart analog output, China emerson ve4035s2b1 deltav redundant hart analog output manufacturers, suppliers, Emerson KJ2005X1 BA1 12P4375X012, KJ1611X1 FD1 manual, KJ1611X1FD1, KJ2005X1 BA1 12P4375X012, KJ2005X1 BA1 12P4375X012 Emerson, KJ2005X1-BA1

Send Inquiry