Name: China Emerson VE4005S2B2 DeltaV Fused HART Analog Output Manufacturers Suppliers - MOORE
Brand: Moore
SKU: 315704750

8-CHANNEL · FUSED TERMINATION · HART OUTPUT

VE4005S2B2 at a Glance

VE4005S2B2 combines eight 4-20 mA HART output channels with the fused DeltaV M-series termination-block option. Confirm the B2 code, installed fuse details, loop resistance, field power and software compatibility before purchasing or replacing the assembly.

Emerson Specifications and Ordering Details

Product code

VE4005S2B2

Product family

DeltaV M-series Traditional I/O

I/O function

HART analog output

Number of channels

Nominal / full signal range

4-20 mA / 1-23 mA

Termination block

Fused I/O termination block

Fuse information

Analog-output specification lists a 2.0 A optional fuse; verify the actual installed fuse

Isolation

Each channel optically isolated from the system; factory tested to 1500 VDC

LocalBus current

100 mA typical, 150 mA maximum at 12 VDC nominal

Field-circuit power

300 mA maximum at 24 VDC ±10%

Accuracy / resolution

0.25% of span over temperature / 12-bit

Output compliance

20 mA into a 700 ohm load at 21.6 VDC supply

Calibration

Calibration information stored on the card

Environment / dimensions

-40 to +70 °C operating; 5 to 95% RH noncondensing; IP20; 107 × 41 × 105 mm (H × W × D)

Confirm the complete order code and product label before purchase or replacement.

Buyer and Engineering Checks

Confirm the B2 configuration

Verify that fused field termination is required and that the complete order code ends in B2.

Inspect the fuse arrangement

Identify the fitted fuse population and rating and obtain the correct approved replacement fuse before commissioning.

Calculate load and power

Check loop resistance against the output-compliance condition and include the full 24 VDC field-circuit power demand.

Verify the DeltaV platform

Confirm DeltaV v10.3.1 or later, a compatible M-series carrier and MQ, MX or PK controller, terminal keying and product label.

VE4005S2B2 Product View

Reference image for VE4005S2B2 inquiry; not an identification of the requested part

Identification checklist

Match the complete model and order code, product label, terminal layout, power requirements and platform compatibility. A similar enclosure does not prove interchangeability.

Typical Applications

Fused 4-20 mA control circuits for compatible valve positioners and actuators.

Analog output loops requiring localized termination-block fuse protection.

HART-compatible field-device control and maintenance applications.

Exact VE4005S2B2 replacement with matching fused termination.

VE4005S2B2 FAQ

What is the difference between VE4005S2B2 and VE4005S2B1?

Their analog-output function is the same, but B2 specifies a fused I/O termination block while B1 specifies a standard I/O termination block.

Is VE4005S2B2 a redundant analog output configuration?

No redundant configuration is stated for this order code. VE4035S2B1 is the redundant standard-termination model in the same official ordering table.

Should a 2.0 A fuse be assumed to be installed?

No. The PDS lists a 2.0 A optional fuse for the analog-output interface. Verify the supplied termination block and installed fuse before use.

What information speeds up a VE4005S2B2 quotation?

Send the exact VE4005S2B2 catalog number, quantity, destination, required delivery date and any replacement or compatibility notes.

Is availability shown live on this page?

No. Current availability, supplied condition, included accessories and lead time are confirmed in the written quotation.

What warranty is offered?

A one-year supplier warranty is offered, subject to the written quotation and warranty terms.

Company and Export Support

We support industrial automation sourcing with model verification, product photography and export coordination. Send the model, quantity, destination and requested delivery date for a focused quotation.