Bently Nevada 330901-10-25-10-02-00 3300 XL NSv Proximity Probe

Bently Nevada 330901-10-25-10-02-00 3300 XL NSv Proximity Probe

BENTLY NEVADA · 3300 XL NSv

330901-10-25-10-02-00

1/4-28 UNF Standard-Mount Proximity Probe

A narrow-side-view eddy-current probe configured for compact machine clearances: 1.0-inch unthreaded length, 2.5-inch case length and a 1.0-metre integral cable with ClickLoc connector.

1/4-28 UNF 1.0 m cable Without armor
AVAILABILITY
In Stock · Original New · 1-Year Warranty Get a Quote
Sales Manager: Cristina · sales3@mooreplc.com · WhatsApp +86 180 2071 4662 ↗
Send Inquiry
Description
PRODUCT IDENTIFICATION

Bently Nevada 330901-10-25-10-02-00

This exact suffix identifies a standard-mount 3300 NSv probe for non-contact shaft observation in installations where a compact probe field and small target performance matter. It is one sensing element in a complete probe, extension-cable and 3300 XL NSv Proximitor system.

Typical duties include radial vibration, axial position, speed, zero-speed and phase-reference measurements on compatible rotating machinery. Final performance depends on the correctly matched extension cable, Proximitor sensor, target material and installed gap.

Base model330901
Probe thread1/4-28 UNF
MountingStandard mount
ArmorWithout armor
Total length1.0 m (39 in)
ConnectorClickLoc coaxial

Ordering Number Breakdown

Each suffix segment changes a physical or ordering characteristic. The decode below applies to the complete number shown on this page.

330901NSv probe
1/4-28 UNF
no armor
10Unthreaded
length
1.0 in
25Overall case
length
2.5 in
10Total probe
length
1.0 m
02Standard cable
ClickLoc
no protector
00Agency approval
option
not required
Verification note: compare the complete suffix-not only "330901"-with the installed probe and ordering records before replacement.

Technical Specifications

Exact 330901-10-25-10-02-00 Configuration
Probe caseAISI 304 stainless steel
Probe tipPolyphenylene sulfide (PPS)
Probe cable75 Ω coaxial, FEP insulated
DC resistance4.2 ± 0.5 Ω for the 1.0 m probe
Minimum bend radius25.4 mm (1.0 in)
Recommended case torque5.1 N·m (45 in·lb) for 1/4-28 probe cases
Complete 3300 XL NSv System Performance
Linear range1.5 mm (60 mils), approximately 0.25–1.75 mm
Recommended gap1.0 mm (40 mils)
Scale factor7.87 V/mm (200 mV/mil)
Frequency response0–10 kHz, +0/−3 dB typical
Recommended targetAISI 4140 steel; other materials require matching calibration
System length5 m or 7 m including probe and extension cable

System values are specified for the matched probe, extension cable and 3300 XL NSv Proximitor Sensor under the conditions defined by the manufacturer.

Measurement System

The probe does not operate as a standalone transmitter. Signal quality relies on three matched elements.

1 · NSv Probe
The tip creates an eddy-current field at the conductive target and responds to changes in probe-to-target distance.
→
2 · 330930 Extension Cable
The selected cable completes the required 5 m or 7 m electrical system length.
→
3 · 330980 Proximitor
The sensor conditions the gap-dependent signal for a compatible machinery-protection or monitoring channel.

Environmental Limits

Probe temperatureOperating and storage: −52 to +177 °C (−62 to +351 °F).
Extension-cable temperatureOperating and storage: −52 to +177 °C (−62 to +351 °F).
Humidity100% condensing, non-submersible, when connectors are correctly protected.
Application caution: sustained exposure below −34 °C may shorten pressure-seal life. Do not assume the probe is pressure-tested for a specific process; containment and media compatibility must be reviewed for the installation.
Bently Nevada 330901-10-25-10-02-00 cable label and configuration detail
Model-label detail · check the full 330901-10-25-10-02-00 suffix

Probe / Cable Compatibility

This 1.0 m probe normally combines with a compatible 330930 extension cable so the probe-plus-extension total matches a 5 m or 7 m 330980 NSv Proximitor Sensor.

5 m system1.0 m probe + 4.0 m compatible extension cable.
7 m system1.0 m probe + 6.0 m compatible extension cable.
Connector interfaceGold-plated brass miniature coaxial ClickLoc.
Legacy note3300 NSv probes and extension cables are mechanically and electrically compatible with earlier 3300 RAM components; verify the complete upgraded system before use.

Installation Information

① Confirm threadUse a clean 1/4-28 UNF mounting hole and avoid excessive thread engagement.
② Control bend radiusKeep the probe lead at or above the 25.4 mm minimum bend radius.
③ Set the gapEstablish the working gap with the matched system and the actual target material.
④ Protect connectorsUse the approved protector or sealing method where moisture or contamination is possible.
For X-Y arrangements and small shafts, maintain the manufacturer's probe-tip separation guidance to limit electromagnetic cross-talk. Installation should be completed by qualified personnel using the applicable machinery and monitoring-system documentation.

Frequently Asked Questions

Select a question to expand or collapse the answer.

What does 330901 identify?

It identifies a standard-mount 3300 NSv probe with a 1/4-28 UNF thread and no stainless-steel armor. The remaining suffixes define the lengths, cable/connector option and approval selection.

Is 330901-10-25-10-02-00 a complete transducer system?

No. It is the probe element. A compatible 330930 extension cable and 330980 NSv Proximitor Sensor are required to form the specified 5 m or 7 m system.

What do the 10 and 25 length codes mean?

The first "10" after the base model gives a 1.0-inch unthreaded length. "25" gives a 2.5-inch overall case length. The later "10" specifies a 1.0-metre total probe length.

Does option 02 include a connector protector?

No. Option 02 specifies the standard cable with a miniature coaxial ClickLoc connector, without the connector protector. Protection can be selected or ordered separately where needed.

Can this probe be used for vibration and Keyphasor measurements?

Within a correctly matched NSv system it supports radial vibration, axial position, tachometer, zero-speed and phase-reference applications. The monitor configuration and mechanical arrangement must be appropriate for the duty.

What information should I provide for a compatibility check?

Send the complete existing probe, extension-cable and Proximitor part numbers, system length, target material, thread and installation photos. This allows the suffix and system match to be checked before quotation.

PLC EXPORT industrial automation sales team meeting
GLOBAL INDUSTRIAL PARTS SUPPORT

About PLC EXPORT

PLC EXPORT supplies industrial automation and machinery-monitoring components for routine maintenance, shutdowns and legacy-system support. Our team helps buyers check full part numbers, compare visible markings and coordinate international quotations.

✓ Part-number reviewSuffix and photo checking
✓ Responsive sourcingAvailability and lead-time support
✓ Legacy equipmentSupport for discontinued systems
✓ Worldwide deliveryExport order coordination
CONTACT US

Check 330901-10-25-10-02-00 Availability

Send the installed model, requested quantity and destination. For replacement checks, include photos of the probe label, extension cable and Proximitor Sensor.

Sales Manager: Cristina

Email: sales3@mooreplc.com

WhatsApp / Mobile: +86 180 2071 4662 ↗

Subject: Bently Nevada 330901-10-25-10-02-00
Website Inquiry
Search Keywords: 330901-10-25-10-02-00 · 330901-10-25-10-02-00 proximity probe · Bently Nevada · 3300 XL NSv · 330901-10-25-10-02-00 datasheet · 330901-10-25-10-02-00 manual

Hot Tags: bently nevada 330901-10-25-10-02-00 3300 xl nsv proximity probe, China bently nevada 330901-10-25-10-02-00 3300 xl nsv proximity probe manufacturers, suppliers, 330103 06 25 10 02 00 3300 XL 8 mm Proximity Probes, 330103 06 25 10 02 00 review, 330103-06-25-10-02-00, 330104 00 08 90 02 05 3300 XL 8 mm Proximity Probe, 330180 51 05 Extension Cable, 330903 00 05 10 01 05 manual

Send Inquiry