Requested 330103 metric probe marking requiring correction against the nameplate: the supplied string is one option group shorter than the official five-group ordering structure.
330103 identifies M10 × 1, unarmored 3300 XL 8 mm construction.
Four option groups are shown instead of the official five.
330103-00-05-10-02-00 is listed as a commonly stocked probe.
Do not finalize dimensions or order until the missing group is confirmed.
The base number 330103 confirms an unarmored M10 × 1 3300 XL 8 mm standard-mount probe, but Bently Nevada 330103-05-10-02-00 cannot be assigned reliable body and cable dimensions until the omitted option group is recovered from the physical label or project record. The official stocked reference 330103-00-05-10-02-00 is a useful comparison, not an automatic substitute.
Do not reinterpret Bently Nevada 330103-05-10-02-00 by shifting the codes left. If the intended model is 330103-00-05-10-02-00, it means 0 mm unthreaded length, 50 mm case, 1.0 m total length, code 02 standard ClickLoc cable and code 00 no approval; this must be proven from the actual label.
The fields below prioritize the values buyers use for selection. Ratings not traceable to the exact model are intentionally marked for nameplate or project-document verification.
3300 XL 8 mm system
Preserve exactly for search and label comparison
M10 × 1 metric thread, without armor
Unthreaded, case, total length, connector/cable, approval
0 mm unthreaded, 50 mm case, 1.0 m total length, code 02, code 00
Confirm whether the requested code is incomplete
Only apply after full-code confirmation
Only apply after full-code confirmation
Official 3300 XL 8 mm drawing
Official family specification
Correctly matched complete system
Documented reference conditions
Approved commissioning procedure
Do not quote from an incomplete string alone
Confirm whether the actual marking is 330103-00-05-10-02-00 or another complete five-group code.
Measure unthreaded and overall case lengths instead of inferring them from the shortened string.
Record extension-cable and Proximitor Sensor labels and calculate total electrical length.
After identity is resolved, verify gap, static output, alarms and dynamic response.
Used to compare the shortened request with the installed probe label and drawings.
Prevents case, cable and approval codes from being shifted into the wrong fields.
Allows the extension cable and Proximitor to be selected after the true total length is known.
Supports a like-for-like change only after the complete code is recovered.
100% advance before shipping
Xiamen
3-5 days
New & original; availability confirmed before order
Carrier selection is arranged according to destination, shipment size and buyer requirements.
Use clear front, side, nameplate, connector and terminal photographs. The complete 330103-05-10-02-00 identity, revision, markings and physical condition must remain readable and be compared with the installed project.

No. Bently Nevada 330103-05-10-02-00 has four option groups after 330103, while the current official format requires five groups: AA-BB-CC-DD-EE.
The Baker Hughes datasheet lists Bently Nevada 330103-00-05-10-02-00 as a commonly stocked probe, but the requested string must not be assumed identical without a label photograph.
The 330103 base in Bently Nevada 330103-05-10-02-00 identifies an M10 × 1 metric, unarmored standard-mount 3300 XL 8 mm probe.
Not from the shortened string alone. For Bently Nevada 330103-05-10-02-00, confirm the missing option group before assigning unthreaded, case and total lengths.
Bently Nevada 330103-05-10-02-00 should only be ordered as written if the physical nameplate or an official project document shows that exact complete identity.
After confirming Bently Nevada 330103-05-10-02-00, match its total length with the extension cable and 330180 Proximitor Sensor and verify the connector and approvals.
Measure the unthreaded length and overall case length of Bently Nevada 330103-05-10-02-00 and photograph the complete probe and cable label.
No. Bently Nevada 330103-05-10-02-00 requires full code, mechanical, cable, connector, approval and system-length comparison before replacement.
Once its identity is resolved, commission Bently Nevada 330103-05-10-02-00 by checking gap voltage, static position, polarity, alarms and dynamic response.
Send a sharp full-label photo, measured body lengths, probe and extension-cable lengths, connector photos, Proximitor label, condition, quantity and destination.
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.
We compare the complete 330103-05-10-02-00 identity, revision, connectors and visible condition before quotation.
Our team reviews the 330103-05-10-02-00 host system, slot, wiring and compatibility requirements.
The supplied 330103-05-10-02-00 markings, connectors and protective packaging are checked before dispatch.
Myrtle coordinates 330103-05-10-02-00 availability, documents, order details and worldwide delivery follow-up.
sales5@askplc.comWhatsApp
+86 18950128464
Requested 330103 metric probe marking requiring correction against the nameplate: the supplied string is one option group shorter than the official five-group ordering structure.
330103 identifies M10 × 1, unarmored 3300 XL 8 mm construction.
Four option groups are shown instead of the official five.
330103-00-05-10-02-00 is listed as a commonly stocked probe.
Do not finalize dimensions or order until the missing group is confirmed.
The base number 330103 confirms an unarmored M10 × 1 3300 XL 8 mm standard-mount probe, but Bently Nevada 330103-05-10-02-00 cannot be assigned reliable body and cable dimensions until the omitted option group is recovered from the physical label or project record. The official stocked reference 330103-00-05-10-02-00 is a useful comparison, not an automatic substitute.
Do not reinterpret Bently Nevada 330103-05-10-02-00 by shifting the codes left. If the intended model is 330103-00-05-10-02-00, it means 0 mm unthreaded length, 50 mm case, 1.0 m total length, code 02 standard ClickLoc cable and code 00 no approval; this must be proven from the actual label.
The fields below prioritize the values buyers use for selection. Ratings not traceable to the exact model are intentionally marked for nameplate or project-document verification.
3300 XL 8 mm system
Preserve exactly for search and label comparison
M10 × 1 metric thread, without armor
Unthreaded, case, total length, connector/cable, approval
0 mm unthreaded, 50 mm case, 1.0 m total length, code 02, code 00
Confirm whether the requested code is incomplete
Only apply after full-code confirmation
Only apply after full-code confirmation
Official 3300 XL 8 mm drawing
Official family specification
Correctly matched complete system
Documented reference conditions
Approved commissioning procedure
Do not quote from an incomplete string alone
Confirm whether the actual marking is 330103-00-05-10-02-00 or another complete five-group code.
Measure unthreaded and overall case lengths instead of inferring them from the shortened string.
Record extension-cable and Proximitor Sensor labels and calculate total electrical length.
After identity is resolved, verify gap, static output, alarms and dynamic response.
Used to compare the shortened request with the installed probe label and drawings.
Prevents case, cable and approval codes from being shifted into the wrong fields.
Allows the extension cable and Proximitor to be selected after the true total length is known.
Supports a like-for-like change only after the complete code is recovered.
100% advance before shipping
Xiamen
3-5 days
New & original; availability confirmed before order
Carrier selection is arranged according to destination, shipment size and buyer requirements.
Use clear front, side, nameplate, connector and terminal photographs. The complete 330103-05-10-02-00 identity, revision, markings and physical condition must remain readable and be compared with the installed project.
No. Bently Nevada 330103-05-10-02-00 has four option groups after 330103, while the current official format requires five groups: AA-BB-CC-DD-EE.
The Baker Hughes datasheet lists Bently Nevada 330103-00-05-10-02-00 as a commonly stocked probe, but the requested string must not be assumed identical without a label photograph.
The 330103 base in Bently Nevada 330103-05-10-02-00 identifies an M10 × 1 metric, unarmored standard-mount 3300 XL 8 mm probe.
Not from the shortened string alone. For Bently Nevada 330103-05-10-02-00, confirm the missing option group before assigning unthreaded, case and total lengths.
Bently Nevada 330103-05-10-02-00 should only be ordered as written if the physical nameplate or an official project document shows that exact complete identity.
After confirming Bently Nevada 330103-05-10-02-00, match its total length with the extension cable and 330180 Proximitor Sensor and verify the connector and approvals.
Measure the unthreaded length and overall case length of Bently Nevada 330103-05-10-02-00 and photograph the complete probe and cable label.
No. Bently Nevada 330103-05-10-02-00 requires full code, mechanical, cable, connector, approval and system-length comparison before replacement.
Once its identity is resolved, commission Bently Nevada 330103-05-10-02-00 by checking gap voltage, static position, polarity, alarms and dynamic response.
Send a sharp full-label photo, measured body lengths, probe and extension-cable lengths, connector photos, Proximitor label, condition, quantity and destination.
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.
We compare the complete 330103-05-10-02-00 identity, revision, connectors and visible condition before quotation.
Our team reviews the 330103-05-10-02-00 host system, slot, wiring and compatibility requirements.
The supplied 330103-05-10-02-00 markings, connectors and protective packaging are checked before dispatch.
Myrtle coordinates 330103-05-10-02-00 availability, documents, order details and worldwide delivery follow-up.
sales5@askplc.comWhatsApp
+86 18950128464
Hot Tags: bently nevada 330103-05-10-02-00 3300 xl 8 mm proximity probe, China bently nevada 330103-05-10-02-00 3300 xl 8 mm proximity probe manufacturers, suppliers, 330103 06 25 10 02 00 3300 XL 8 mm Proximity Probes, 330180 51 05 Extension Cable, 330180 51 05 manual, Bently Nevada 330103 06 25 10 02 00, Bently Nevada 330104 00 08 90 02 05, Bently Nevada 330180 51 05

