BENTLY NEVADA 330130-040-01-00 Standard Extension Cable

BENTLY NEVADA 330130-040-01-00 Standard Extension Cable

— Part No.: 330130-040-01-00 (Standard Extension Cable)
— Manufacturer: Bently Nevada
— Product Type: Standard Extension Cable
— Series Compatibility: Bently Nevada 3300 Proximity & Velomitor Sensor Systems
— Availability: In Stock
— Country of Manufacture: United States (USA)
— Sales Manager: Silver
— Email: sales1@askplc.com
— Phone (WhatsApp): +86-18020714492
— WeChat: +86-18020714492
Send Inquiry
Description

 

330130-040-01-0026x26x3cm046kg1
 

Products Description

The 330130-040-01-00 Standard Extension Cable is designed to complete the electrical path between Bently Nevada proximity probes and their associated proximitor signal conditioners. In many machinery layouts, probes are installed deep within bearing housings or sealed casings, while signal electronics are mounted remotely in control cabinets. This extension cable enables that separation without altering the electrical behavior of the measurement loop.

Rather than acting as a simple conductor, the cable is engineered to maintain impedance balance, shielding continuity, and connector alignment across the full run length. These characteristics are critical to ensuring that shaft displacement and vibration data remain stable over time, even in environments exposed to electrical noise, oil vapor, and continuous mechanical vibration.

 

 

Characteristics

 

♦ Electrically matched for use within Bently Nevada proximity measurement loops
♦ Maintains signal linearity and phase characteristics over extended routing distances
♦ Shielded construction reduces susceptibility to EMI from motors and power cables
♦ Connector geometry ensures secure engagement with probe and proximitor interfaces
♦ Outer jacket designed to tolerate oil mist, cabinet heat, and mechanical movement
♦ Suitable for permanent installation in machinery protection systems

 

Applications

 

In practice, this model is commonly selected for rotating equipment installations where sensor access and electronics placement cannot be co-located. Typical uses include turbine bearing monitoring, compressor shaft position measurement, and generator vibration systems where long routing paths are unavoidable. It is also frequently used during retrofits, allowing existing proximitor racks to remain in place while probes are relocated or replaced.

 

Parameter Table

 

Parameter Specification
Model Number 330130-040-01-00
Product Type 3300 XL Standard Extension Cable
Cable Length 4.0 m (13.1 ft)
Cable Material 75 Ω triaxial, FEP insulated
Connector Type ClickLoc gold-plated
Cable Option Armored cable
Agency Approval Not required
Operating Temp. −51 °C to +177 °C
Pull Strength 330 N (75 lbf) probe-to-lead
Weight (Approx.) 0.034 kg
Country of Origin USA

Contact Information

 

For pricing, availability, or technical consultation regarding this model, please contact our sales team:

 

【Sales Manager】

 

Silver

 

【WhatsApp】

+86-18020714492

product-900-500
 

【Email】

sales1@askplc.com

 

【WeChat】

+86-18020714492

 

 FAQ 

 

Q1 Can this extension cable be mixed with cables from other series?
No. It is intended to be used only with matching Bently Nevada proximity system components to avoid signal mismatch or scaling errors.

Q2 What does the "040" code indicate in real installations?
It identifies the factory-defined cable length category, helping ensure the total loop length remains within the sensor system's calibrated range.

Q3 Will changing only the extension cable affect probe calibration?
Yes. Any change in cable length or type can influence the proximity system response, which is why matched extension cables are recommended.

Q4 Is this cable suitable for high-vibration machinery zones?
Yes. The construction is intended for fixed routing near rotating equipment, where vibration and thermal cycling are present.

Q5 Is the cable directional during installation?
The connectors are keyed for correct mating with probes and proximitor modules, preventing incorrect orientation during assembly.

 

You may also like

WOODWARD 8440-2050 ABB DSTC190 57520001-ER
WOODWARD 8444-1002 ABB DSTC404 57520001-DS 
WOODWARD 8516-085 ABB DSTC452   5751017-A
WOODWARD 9905-003 ABB DSTC454L  5751017-R
WOODWARD 9905-021 ABB DSTD 110A
WOODWARD 9905-068  2301A ABB DSTD N021 3BSE003239R1
WOODWARD 9905-096 ABB DSTD N030 3BSE013334R1
WOODWARD 9905-792 ABB DSTD N031 3BSE013335R1
WOODWARD 9905-968 ABB DSTD108L 57160001-ABW
WOODWARD 9905-969 ABB DSTD108P
WOODWARD 9905-970 ABB DSTD110A  YB161102-AM
WOODWARD 9905-971 ABB DSTD110A 57160001-TZ
WOODWARD 9906-619 ABB DSTD110A YB161102-AM

 

catalog 3

Hot Tags: bently nevada 330130-040-01-00 standard extension cable, China bently nevada 330130-040-01-00 standard extension cable manufacturers, suppliers, bently nevada 3300 series and 3300 xl proximity probe, 330180 51 05 Extension Cable, 330103 06 25 10 02 00 3300 XL 8 mm Proximity Probes, Bently Nevada 330103 06 25 10 02 00, 330903 00 05 10 01 05 manual, Bently Nevada 330903 00 05 10 01 05

Send Inquiry