M14 × 1.5 unarmored 3300 XL 11 mm probe with 0 mm unthreaded length, 40 mm case, 1.0 m FluidLoc cable, connector protector and no added agency-approval option.
Nominal 4 mm linear range and 3.94 V/mm scale factor for a matched complete loop.
M14 × 1.5, unarmored, 0 mm unthreaded length and 40 mm case.
Code 11 supplies a 1.0 m FluidLoc cable with connector protector.
Use only with the corresponding 3300 XL 11 mm Proximitor Sensor.
Bently Nevada 330703-000-040-10-11-00 is a compact metric 11 mm probe selected where the standard 8 mm system does not provide enough measurement range. The complete 3300 XL 11 mm system delivers a nominal 4 mm (160 mil) linear range with 3.94 V/mm (100 mV/mil) scale factor under documented reference conditions.
Code 11 specifies FluidLoc cable with a connector protector, so both the jacket and joint protection must match the installed environment. Pair the 1.0 m probe directly with the correct 1.0 m 3300 XL 11 mm Proximitor Sensor; do not connect it to an 8 mm Proximitor Sensor.
The fields below prioritize the values buyers use for selection. Ratings not traceable to the exact model are intentionally marked for nameplate or project-document verification.
3300 XL 11 mm system
Retain every option group
M14 × 1.5, without armor
Code 000
Code 040
Code 10
Code 11
Code 00
Official drawing
Correctly matched system
Official family value
All lengths must match
Confirm all items
Verify that the probe, extension cable and Proximitor Sensor all belong to the 3300 XL 11 mm system.
Confirm the 40 mm M14 × 1.5 case and locknut fit the bracket without obstructing cable bend clearance.
Inspect the FluidLoc jacket, protector, connector faces and any evidence of fluid ingress.
Commission the complete loop against the documented 4 mm range and 3.94 V/mm scale factor.
Supports vibration or displacement duties requiring more range than an 8 mm system.
FluidLoc cable supports documented installations requiring improved fluid resistance.
The 40 mm M14 × 1.5 body fits verified short-body mounting geometry.
Restores an exact 1 m 11 mm probe-and-Proximitor configuration.
100% advance before shipping
Xiamen
3-5 days
New & original; availability confirmed before order
Carrier selection is arranged according to destination, shipment size and buyer requirements.
Use clear front, side, nameplate, connector and terminal photographs. The complete 330703-000-040-10-11-00 identity, revision, markings and physical condition must remain readable and be compared with the installed project.

Bently Nevada 330703-000-040-10-11-00 belongs to the 11 mm system, which provides a nominal 4 mm linear range for duties needing more displacement range.
Bently Nevada 330703-000-040-10-11-00 uses an M14 × 1.5 unarmored body with 0 mm unthreaded length and a 40 mm case.
Code 11 gives Bently Nevada 330703-000-040-10-11-00 a FluidLoc cable and a protector on the miniature ClickLoc connector.
No. Bently Nevada 330703-000-040-10-11-00 must be used with the matching 3300 XL 11 mm Proximitor Sensor.
A correctly matched system containing Bently Nevada 330703-000-040-10-11-00 has a nominal 3.94 V/mm (100 mV/mil) scale factor under reference conditions.
Code 10 gives Bently Nevada 330703-000-040-10-11-00 a 1.0 m total probe-and-cable length.
Inspect the tip, M14 threads, short case, FluidLoc jacket, ClickLoc contacts and connector protector of Bently Nevada 330703-000-040-10-11-00.
Provide the full label, 11 mm Proximitor label, mounting dimensions, FluidLoc and protector photos, condition, quantity and destination.
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.
We compare the complete 330703-000-040-10-11-00 identity, revision, connectors and visible condition before quotation.
Our team reviews the 330703-000-040-10-11-00 host system, slot, wiring and compatibility requirements.
The supplied 330703-000-040-10-11-00 markings, connectors and protective packaging are checked before dispatch.
Myrtle coordinates 330703-000-040-10-11-00 availability, documents, order details and worldwide delivery follow-up.
sales5@askplc.comWhatsApp
+86 18950128464
M14 × 1.5 unarmored 3300 XL 11 mm probe with 0 mm unthreaded length, 40 mm case, 1.0 m FluidLoc cable, connector protector and no added agency-approval option.
Nominal 4 mm linear range and 3.94 V/mm scale factor for a matched complete loop.
M14 × 1.5, unarmored, 0 mm unthreaded length and 40 mm case.
Code 11 supplies a 1.0 m FluidLoc cable with connector protector.
Use only with the corresponding 3300 XL 11 mm Proximitor Sensor.
Bently Nevada 330703-000-040-10-11-00 is a compact metric 11 mm probe selected where the standard 8 mm system does not provide enough measurement range. The complete 3300 XL 11 mm system delivers a nominal 4 mm (160 mil) linear range with 3.94 V/mm (100 mV/mil) scale factor under documented reference conditions.
Code 11 specifies FluidLoc cable with a connector protector, so both the jacket and joint protection must match the installed environment. Pair the 1.0 m probe directly with the correct 1.0 m 3300 XL 11 mm Proximitor Sensor; do not connect it to an 8 mm Proximitor Sensor.
The fields below prioritize the values buyers use for selection. Ratings not traceable to the exact model are intentionally marked for nameplate or project-document verification.
3300 XL 11 mm system
Retain every option group
M14 × 1.5, without armor
Code 000
Code 040
Code 10
Code 11
Code 00
Official drawing
Correctly matched system
Official family value
All lengths must match
Confirm all items
Record probe, extension cable and Proximitor Sensor labels.
Verify M14 × 1.5 thread, 40 mm case, target and clearances.
Inspect jacket, protector and connectors; avoid crushing, sharp bends and contamination.
Verify gap, static output, linear response and alarm behavior.
Supports vibration or displacement duties requiring more range than an 8 mm system.
FluidLoc cable supports documented installations requiring improved fluid resistance.
The 40 mm M14 × 1.5 body fits verified short-body mounting geometry.
Restores an exact 1 m 11 mm probe-and-Proximitor configuration.
100% advance before shipping
Xiamen
3-5 days
New & original; availability confirmed before order
Carrier selection is arranged according to destination, shipment size and buyer requirements.
Use clear front, side, nameplate, connector and terminal photographs. The complete 330703-000-040-10-11-00 identity, revision, markings and physical condition must remain readable and be compared with the installed project.
Bently Nevada 330703-000-040-10-11-00 is a 3300 XL 11 mm proximity probe used with the matching extension cable and Proximitor Sensor for non-contact shaft vibration, position, speed or Keyphasor measurement.
Bently Nevada 330703-000-040-10-11-00 uses M14 × 1.5 metric thread. Confirm the machine mounting thread, locknut and probe clearances before installation.
Bently Nevada 330703-000-040-10-11-00 is supplied as unarmored FluidLoc cable. Preserve the exact base model because armored and unarmored probes have different routing and mechanical requirements.
The documented total probe-and-cable length for Bently Nevada 330703-000-040-10-11-00 is 1.0 m (3.3 ft). Match it with the extension cable and Proximitor Sensor total electrical length.
Bently Nevada 330703-000-040-10-11-00 uses FluidLoc cable with connector protector. Inspect the center contact, shell, protector and cable entry before commissioning.
Bently Nevada 330703-000-040-10-11-00 is specified with agency approval not required. The supplied label and site hazardous-area documentation remain the controlling references.
Bently Nevada 330703-000-040-10-11-00 should only replace another probe after thread, unthreaded and case lengths, total cable length, connector, armor, approvals, target material and Proximitor system length are matched.
After fitting Bently Nevada 330703-000-040-10-11-00, verify mechanical gap, static output, channel polarity, alarm behavior and dynamic response using the approved system procedure.
For Bently Nevada 330703-000-040-10-11-00, provide the full label, tip, threaded body, cable, connector, installed position, extension-cable label and Proximitor Sensor label.
Send the complete Bently Nevada 330703-000-040-10-11-00 code, all matched-loop labels, mounting dimensions, connector photos, approval requirement, condition, quantity and destination.
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.
We compare the complete 330703-000-040-10-11-00 identity, revision, connectors and visible condition before quotation.
Our team reviews the 330703-000-040-10-11-00 host system, slot, wiring and compatibility requirements.
The supplied 330703-000-040-10-11-00 markings, connectors and protective packaging are checked before dispatch.
Myrtle coordinates 330703-000-040-10-11-00 availability, documents, order details and worldwide delivery follow-up.
sales5@askplc.comWhatsApp
+86 18950128464
Hot Tags: bently nevada 330703-000-040-10-11-00 3300 xl 11 mm probe, China bently nevada 330703-000-040-10-11-00 3300 xl 11 mm probe manufacturers, suppliers, 330104 00 08 90 02 05 datasheet, 330180 51 05 Extension Cable, 330180-51-05, 330903-00-05-10-01-05, Bently Nevada 330104 00 08 90 02 05, Bently Nevada 330180 51 05

