Bently Nevada 330103-00-14-05-02-00 3300 XL 8 mm Metric Proximity Probe
M10×1 metric 3300 XL 8 mm probe without armor, with 0 mm unthreaded length, 140 mm case and 0.5 m standard cable.
What matters when specifying 330103-00-14-05-02-00
Probe base
330103 = M10×1 without armor.
Mechanical codes
00 = 0 mm; 14 = 140 mm case.
Total length
05 = 0.5 m.
Approval
00 = approval option not required.
Description and purpose
Documented purpose
330103-00-14-05-02-00 provides non-contact shaft vibration or position measurement in a matched 3300 XL 8 mm transducer loop.
Replacement caution
Confirm that the 140 mm case fits the installed bracket and that probe plus extension cable equals the Proximitor system length.
Technical specifications
The fields below prioritize the values buyers use for selection. Ratings not traceable to the exact model are intentionally marked for nameplate or project-document verification.
Bently Nevada, a Baker Hughes business
3300 XL 8 mm Proximity Transducer System
330103-00-14-05-02-00
Match every suffix and revision on the supplied label
M10×1
Metric standard-mount probe
00
0 mm
14
140 mm
05
0.5 m (1.6 ft)
02
Miniature ClickLoc; standard cable; no protector
00
Not required
Planning a 330103-00-14-05-02-00 replacement
Full identity record
Photograph the complete 330103-00-14-05-02-00 label, revision, connectors and installed position before removal.
System compatibility
Confirm the 330103-00-14-05-02-00 host system, mating hardware, cable or terminals and approved project documentation.
Physical inspection
Check 330103-00-14-05-02-00 mounting, connector condition, cable routing, grounding and environmental exposure.
Commissioning evidence
After installing 330103-00-14-05-02-00, verify every affected measurement, alarm, diagnostic or protection path against the approved procedure.
Applications
Radial vibration
Measures shaft relative vibration.
Axial position
Measures thrust position.
Speed reference
Supports phase or speed measurement where configured.
Long-case installation
Fits documented 140 mm mounting geometry.
Ordering information
100% advance before shipping
Xiamen
3-5 days
New & original; availability confirmed before order
Carrier selection is arranged according to destination, shipment size and buyer requirements.
Product image and identification notes
Confirm the exact 330103-00-14-05-02-00 in the photographs
Use clear front, side, nameplate, connector and terminal photographs. The complete 330103-00-14-05-02-00 identity, revision, markings and physical condition must remain readable and be compared with the installed project.

FAQ about 330103-00-14-05-02-00
What is 330103-00-14-05-02-00 used for?
330103-00-14-05-02-00 is m10×1 metric 3300 XL 8 mm probe without armor, with 0 mm unthreaded length, 140 mm case and 0.5 m standard cable. It must be selected as part of the documented Bently Nevada system, not by appearance alone.
Which official product family includes 330103-00-14-05-02-00?
330103-00-14-05-02-00 belongs to 3300 XL 8 mm Proximity Transducer System. The complete family manual and installed-system drawing should be checked before quotation or replacement.
Which specifications matter most when selecting 330103-00-14-05-02-00?
For 330103-00-14-05-02-00, verify the complete order code, mechanical execution, cable or terminal arrangement, system length or channel configuration, approvals and the exact receiving hardware.
Can 330103-00-14-05-02-00 replace a visually similar Bently Nevada item?
330103-00-14-05-02-00 should replace another item only after its full suffix, revision, interfaces, mounting, electrical characteristics and host-system compatibility have been matched.
What should be photographed before removing 330103-00-14-05-02-00?
For 330103-00-14-05-02-00, photograph the complete nameplate, all suffixes, front and side views, connectors or terminals, installed position, adjacent hardware and cable routing.
What installation checks are required for 330103-00-14-05-02-00?
Before installing 330103-00-14-05-02-00, isolate the machine as required, inspect mating hardware, verify grounding and wiring, preserve configuration evidence and follow the official service procedure.
How should 330103-00-14-05-02-00 be commissioned?
After installing 330103-00-14-05-02-00, restore the system in the approved sequence and prove the affected signal, speed, vibration, position, diagnostic and alarm functions appropriate to the application.
What information is needed for a 330103-00-14-05-02-00 quotation?
For a 330103-00-14-05-02-00 quotation, send the full label, host-system model, existing configuration, clear photographs, quantity, destination, required condition and any certificate or approval requirements.
About PLCEXPORT
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.
Model verification
We compare the complete 330103-00-14-05-02-00 identity, revision, connectors and visible condition before quotation.
Technical coordination
Our team reviews the 330103-00-14-05-02-00 host system, slot, wiring and compatibility requirements.
Inspection and packing
The supplied 330103-00-14-05-02-00 markings, connectors and protective packaging are checked before dispatch.
Customer support
Myrtle coordinates 330103-00-14-05-02-00 availability, documents, order details and worldwide delivery follow-up.
Planning a 330103-00-14-05-02-00 replacement?
sales5@askplc.comWhatsApp
+86 18950128464
Recommended models
Bently Nevada
HIMA
Hot Tags: bently nevada 330103-00-14-05-02-00 3300 xl 8 mm metric proximity probe, China bently nevada 330103-00-14-05-02-00 3300 xl 8 mm metric proximity probe manufacturers, suppliers, 330180 51 05 Extension Cable, 330180 51 05 manual, 330180-51-05, 330903 00 05 10 01 05 manual, bently nevada 3300 series and 3300 xl proximity probe, Bently Nevada 330180 51 05

