Bently Nevada 330106-00-04-10-02-00 3300 XL 8 mm Reverse-Mount Probe
Requested 330106 metric reverse-mount 8 mm proximity-probe execution with 1.0 m cable and ClickLoc connector.
What matters when specifying 330106-00-04-10-02-00
Reverse mount
330106 identifies the metric reverse-mount family.
Requested identity
Retain 330106-00-04-10-02-00 exactly.
Cable code
10 = 1.0 m total length.
Verification alert
Mechanical codes 00-04 must be confirmed from the label.
Description and purpose
Documented purpose
330106 identifies the M10×1 reverse-mount 3300 XL 8 mm probe family used where the probe is installed from inside the housing or bracket arrangement.
Replacement caution
The current public Baker Hughes reverse-mount table normally documents fixed mechanical codes for 330106. Codes 00-04 in this requested identity require direct nameplate or factory-document verification before quotation.
Technical specifications
The fields below prioritize the values buyers use for selection. Ratings not traceable to the exact model are intentionally marked for nameplate or project-document verification.
Bently Nevada, a Baker Hughes business
3300 XL 8 mm Proximity Transducer System
330106-00-04-10-02-00
Match every suffix and revision on the supplied label
330106
M10×1 reverse-mount 8 mm probe
00-04
Verify against supplied label and factory record
10
1.0 m (3.3 ft)
02
Miniature ClickLoc coaxial connector
00
Not required
No inferred interchangeability
Do not substitute a standard-mount 330103
Planning a 330106-00-04-10-02-00 replacement
Full identity record
Photograph the complete 330106-00-04-10-02-00 label, revision, connectors and installed position before removal.
System compatibility
Confirm the 330106-00-04-10-02-00 host system, mating hardware, cable or terminals and approved project documentation.
Physical inspection
Check 330106-00-04-10-02-00 mounting, connector condition, cable routing, grounding and environmental exposure.
Commissioning evidence
After installing 330106-00-04-10-02-00, verify every affected measurement, alarm, diagnostic or protection path against the approved procedure.
Applications
Internal mounting
Supports documented reverse-mount arrangements.
Radial vibration
Measures shaft relative vibration.
Housing assemblies
Used in compatible probe-housing constructions.
Verified replacement
Requires exact mechanical-code confirmation.
Ordering information
100% advance before shipping
Xiamen
3-5 days
New & original; availability confirmed before order
Carrier selection is arranged according to destination, shipment size and buyer requirements.
Product image and identification notes
Confirm the exact 330106-00-04-10-02-00 in the photographs
Use clear front, side, nameplate, connector and terminal photographs. The complete 330106-00-04-10-02-00 identity, revision, markings and physical condition must remain readable and be compared with the installed project.

FAQ about 330106-00-04-10-02-00
What is 330106-00-04-10-02-00 used for?
330106-00-04-10-02-00 is requested 330106 metric reverse-mount 8 mm proximity-probe execution with 1.0 m cable and ClickLoc connector. It must be selected as part of the documented Bently Nevada system, not by appearance alone.
Which official product family includes 330106-00-04-10-02-00?
330106-00-04-10-02-00 belongs to 3300 XL 8 mm Proximity Transducer System. The complete family manual and installed-system drawing should be checked before quotation or replacement.
Which specifications matter most when selecting 330106-00-04-10-02-00?
For 330106-00-04-10-02-00, verify the complete order code, mechanical execution, cable or terminal arrangement, system length or channel configuration, approvals and the exact receiving hardware.
Can 330106-00-04-10-02-00 replace a visually similar Bently Nevada item?
330106-00-04-10-02-00 should replace another item only after its full suffix, revision, interfaces, mounting, electrical characteristics and host-system compatibility have been matched.
What should be photographed before removing 330106-00-04-10-02-00?
For 330106-00-04-10-02-00, photograph the complete nameplate, all suffixes, front and side views, connectors or terminals, installed position, adjacent hardware and cable routing.
What installation checks are required for 330106-00-04-10-02-00?
Before installing 330106-00-04-10-02-00, isolate the machine as required, inspect mating hardware, verify grounding and wiring, preserve configuration evidence and follow the official service procedure.
How should 330106-00-04-10-02-00 be commissioned?
After installing 330106-00-04-10-02-00, restore the system in the approved sequence and prove the affected signal, speed, vibration, position, diagnostic and alarm functions appropriate to the application.
What information is needed for a 330106-00-04-10-02-00 quotation?
For a 330106-00-04-10-02-00 quotation, send the full label, host-system model, existing configuration, clear photographs, quantity, destination, required condition and any certificate or approval requirements.
About PLCEXPORT
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.
Model verification
We compare the complete 330106-00-04-10-02-00 identity, revision, connectors and visible condition before quotation.
Technical coordination
Our team reviews the 330106-00-04-10-02-00 host system, slot, wiring and compatibility requirements.
Inspection and packing
The supplied 330106-00-04-10-02-00 markings, connectors and protective packaging are checked before dispatch.
Customer support
Myrtle coordinates 330106-00-04-10-02-00 availability, documents, order details and worldwide delivery follow-up.
Planning a 330106-00-04-10-02-00 replacement?
sales5@askplc.comWhatsApp
+86 18950128464
Recommended models
Bently Nevada
HIMA
Hot Tags: bently nevada 330106-00-04-10-02-00 3300 xl 8 mm reverse-mount probe, China bently nevada 330106-00-04-10-02-00 3300 xl 8 mm reverse-mount probe manufacturers, suppliers, 330103 06 25 10 02 00 review, 330104 00 08 90 02 05 3300 XL 8 mm Proximity Probe, 330903 00 05 10 01 05 3300 XL 8 mm Proximity Probes, 330903-00-05-10-01-05, Bently Nevada 330104 00 08 90 02 05, Bently Nevada 330903 00 05 10 01 05

