Bently Nevada 330101-00-17-10-02-CN 3300 XL 8 mm Proximity Probe
3/8-24 UNF 3300 XL 8 mm probe without armor, with 0.0 in unthreaded length, 1.7 in case and 1.0 m standard cable.
What matters when specifying 330101-00-17-10-02-CN
Probe base
330101 = 3/8-24 UNF without armor.
Mechanical codes
00 unthreaded; 17 = 1.7 in case.
Total length
10 = 1.0 m.
Connector
02 = ClickLoc, standard cable, no protector.
Description and purpose
Documented purpose
330101-00-17-10-02-CN is an English-thread standard-mount 8 mm proximity probe for non-contact shaft vibration and position measurement in a matched 3300 XL loop.
Replacement caution
Match thread, case length, cable length, connector, target material, Proximitor system length and CN approval documentation.
Technical specifications
The fields below prioritize the values buyers use for selection. Ratings not traceable to the exact model are intentionally marked for nameplate or project-document verification.
Bently Nevada, a Baker Hughes business
3300 XL 8 mm Proximity Transducer System
330101-00-17-10-02-CN
Match every suffix and revision on the supplied label
3/8-24 UNF
Standard-mount English probe
00
0.0 in
17
1.7 in
10
1.0 m (3.3 ft)
02
Miniature ClickLoc; standard cable; no protector
CN
Verify current approval record and supplied label
Planning a 330101-00-17-10-02-CN replacement
Full identity record
Photograph the complete 330101-00-17-10-02-CN label, revision, connectors and installed position before removal.
System compatibility
Confirm the 330101-00-17-10-02-CN host system, mating hardware, cable or terminals and approved project documentation.
Physical inspection
Check 330101-00-17-10-02-CN mounting, connector condition, cable routing, grounding and environmental exposure.
Commissioning evidence
After installing 330101-00-17-10-02-CN, verify every affected measurement, alarm, diagnostic or protection path against the approved procedure.
Applications
Radial vibration
Non-contact shaft-vibration measurement.
Axial position
Thrust-position measurement with correct geometry.
Keyphasor duty
Phase-reference or speed sensing where approved.
Spare replacement
Exact 3/8-24 UNF, 1.0 m execution.
Ordering information
100% advance before shipping
Xiamen
3-5 days
New & original; availability confirmed before order
Carrier selection is arranged according to destination, shipment size and buyer requirements.
Product image and identification notes
Confirm the exact 330101-00-17-10-02-CN in the photographs
Use clear front, side, nameplate, connector and terminal photographs. The complete 330101-00-17-10-02-CN identity, revision, markings and physical condition must remain readable and be compared with the installed project.

FAQ about 330101-00-17-10-02-CN
What is 330101-00-17-10-02-CN used for?
330101-00-17-10-02-CN is 3/8-24 UNF 3300 XL 8 mm probe without armor, with 0.0 in unthreaded length, 1.7 in case and 1.0 m standard cable. It must be selected as part of the documented Bently Nevada system, not by appearance alone.
Which official product family includes 330101-00-17-10-02-CN?
330101-00-17-10-02-CN belongs to 3300 XL 8 mm Proximity Transducer System. The complete family manual and installed-system drawing should be checked before quotation or replacement.
Which specifications matter most when selecting 330101-00-17-10-02-CN?
For 330101-00-17-10-02-CN, verify the complete order code, mechanical execution, cable or terminal arrangement, system length or channel configuration, approvals and the exact receiving hardware.
Can 330101-00-17-10-02-CN replace a visually similar Bently Nevada item?
330101-00-17-10-02-CN should replace another item only after its full suffix, revision, interfaces, mounting, electrical characteristics and host-system compatibility have been matched.
What should be photographed before removing 330101-00-17-10-02-CN?
For 330101-00-17-10-02-CN, photograph the complete nameplate, all suffixes, front and side views, connectors or terminals, installed position, adjacent hardware and cable routing.
What installation checks are required for 330101-00-17-10-02-CN?
Before installing 330101-00-17-10-02-CN, isolate the machine as required, inspect mating hardware, verify grounding and wiring, preserve configuration evidence and follow the official service procedure.
How should 330101-00-17-10-02-CN be commissioned?
After installing 330101-00-17-10-02-CN, restore the system in the approved sequence and prove the affected signal, speed, vibration, position, diagnostic and alarm functions appropriate to the application.
What information is needed for a 330101-00-17-10-02-CN quotation?
For a 330101-00-17-10-02-CN quotation, send the full label, host-system model, existing configuration, clear photographs, quantity, destination, required condition and any certificate or approval requirements.
About PLCEXPORT
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.
Model verification
We compare the complete 330101-00-17-10-02-CN identity, revision, connectors and visible condition before quotation.
Technical coordination
Our team reviews the 330101-00-17-10-02-CN host system, slot, wiring and compatibility requirements.
Inspection and packing
The supplied 330101-00-17-10-02-CN markings, connectors and protective packaging are checked before dispatch.
Customer support
Myrtle coordinates 330101-00-17-10-02-CN availability, documents, order details and worldwide delivery follow-up.
Planning a 330101-00-17-10-02-CN replacement?
sales5@askplc.comWhatsApp
+86 18950128464
Recommended models
Bently Nevada
HIMA
Hot Tags: bently nevada 330101-00-17-10-02-cn 3300 xl 8 mm proximity probe, China bently nevada 330101-00-17-10-02-cn 3300 xl 8 mm proximity probe manufacturers, suppliers, 330103 06 25 10 02 00 3300 XL 8 mm Proximity Probes, 330103-06-25-10-02-00, 330104-00-08-90-02-05, 330180-51-05, 330903 00 05 10 01 05 manual, Bently Nevada 330180 51 05

