Bently Nevada 330103-00-07-05-02-00 3300 XL 8 mm Proximity Probe

Bently Nevada 330103-00-07-05-02-00 3300 XL 8 mm Proximity Probe

BENTLY NEVADA · 3300 XL 8 MM PROXIMITY TRANSDUCER SYSTEM
Bently Nevada 330103-00-07-05-02-00 3300 XL 8 mm Proximity Probe
Compact M10 × 1 3300 XL 8 mm probe for metric brackets: 70 mm threaded case, no smooth unthreaded extension, 0.5 m integral lead, standard ClickLoc connection and suffix 00 without the multiple-approval option.
New & original
One-year warranty
3-5 days
Send Inquiry
Description
BENTLY NEVADA · 3300 XL 8 MM PROXIMITY TRANSDUCER SYSTEM
Bently Nevada 330103-00-07-05-02-00 3300 XL 8 mm proximity probe

Compact M10 × 1 3300 XL 8 mm probe for metric brackets: 70 mm threaded case, no smooth unthreaded extension, 0.5 m integral lead, standard ClickLoc connection and suffix 00 without the multiple-approval option.

New & original
One-year warranty
3-5 days
PRODUCT AT A GLANCE
What matters when specifying 330103-00-07-05-02-00
Best fit for the user

A practical choice for an existing M10 × 1 bracket with restricted rear clearance and a verified 70 mm body requirement.

Mechanical check

Confirm 0 mm unthreaded length, 70 mm case, two-locknut access and enough insertion range to establish the specified cold gap.

Loop-length check

The 0.5 m integral lead is only one part of the tuned system; verify the extension-cable length and the connected 330180 Proximitor Sensor.

Environmental check

Standard ClickLoc connection without protector and no multiple-approval suffix; review moisture, oil and area-classification requirements.

OFFICIAL-DOCUMENT-BASED SUMMARY
Technical specifications

The fields below prioritize the values buyers use for selection. Ratings not traceable to the exact model are intentionally marked for nameplate or project-document verification.

Manufacturer
Bently Nevada, a Baker Hughes business

3300 XL 8 mm system

Complete model
330103-00-07-05-02-00

Retain every suffix

Probe base
330103

M10 × 1 metric thread; unarmored standard cable

Unthreaded length
0 mm

Verify insertion and target geometry

Overall case length
70 mm

Verify bracket and locknut position

Total length
0.5 m (1.6 ft)

Probe plus integral cable

Connector / cable option
miniature coaxial ClickLoc connector, standard cable

Inspect before installation

Agency approval
agency approval not required

Match site documentation

Probe tip diameter
8.0 mm (0.31 in)

Official dimensional drawing

Cable impedance
75 Ω

System component value

Complete-system linear range
2 mm (80 mils)

When correctly matched and installed

Complete-system scale factor
7.87 V/mm (200 mV/mil) ±5%

Under documented reference conditions

Recommended system gap
1.27 mm (50 mils)

Verify with approved procedure

Minimum target diameter
15.2 mm (0.6 in)

Flat target reference

Minimum shaft diameter
50.8 mm (2.0 in)

Official system reference

Buyer selection check
Thread, lengths, connector, armor, approvals and system length

All items must match

INSTALLATION CHECKS
Planning a 330103-00-07-05-02-00 replacement
Fit before purchase

Measure the existing bracket-to-target depth and confirm a 70 mm M10 × 1 body provides enough insertion plus two-locknut adjustment.

Complete loop identity

Read the probe, extension-cable and Proximitor labels together; the short 0.5 m probe lead cannot be selected independently.

Connector environment

Inspect the unprotected code-02 ClickLoc joint for oil, moisture, dirt, looseness or damaged contacts before reuse.

Return-to-service record

After gapping, record static voltage, shaft position, channel indication and alarm status so the replacement can be compared with the previous baseline.

COMMERCIAL DETAILS
Ordering information
PAYMENT

100% advance before shipping

PORT

Xiamen

DELIVERY TIME

3-5 days

CONDITION

New & original; availability confirmed before order

 
LOGISTICS PARTNERS

Carrier selection is arranged according to destination, shipment size and buyer requirements.

DHL
Express
UPS
Worldwide
FedEx
Priority
TNT
International
ARAMEX
Logistics
SF Express
Asia network
IMAGE AND NAMEPLATE REVIEW
Product image and identification notes
PHOTO VERIFICATION
Confirm the exact 330103-00-07-05-02-00 in the photographs

Use clear front, side, nameplate, connector and terminal photographs. The complete 330103-00-07-05-02-00 identity, revision, markings and physical condition must remain readable and be compared with the installed project.

 
Full nameplate
Front and side view
Connector detail
Installed position
330103-05-12-10-01-002x15x121cm01kg1
BUYER QUESTIONS
FAQ about 330103-00-07-05-02-00
Q1
Can Bently Nevada 330103-00-07-05-02-00 be replaced by another 330103 probe with the same thread?
 

No. Bently Nevada 330103-00-07-05-02-00 also fixes the 70 mm body, 0.5 m lead, code-02 ClickLoc connection and suffix-00 approval scope; every field must match the installed loop.

Q2
Can the 0.5 m lead on Bently Nevada 330103-00-07-05-02-00 be shortened, extended by splicing or repaired?
 

No. The integral lead of Bently Nevada 330103-00-07-05-02-00 is part of the calibrated proximity system and should not be cut, spliced or field-repaired; use the specified extension cable.

Q3
What symptoms may indicate damage to Bently Nevada 330103-00-07-05-02-00?
 

Bently Nevada 330103-00-07-05-02-00 should be investigated if the channel shows unstable gap voltage, intermittent readings when the cable moves, visible tip wear, crushed cable or contaminated ClickLoc contacts.

Q4
How should an unused Bently Nevada 330103-00-07-05-02-00 be handled and stored?
 

Keep Bently Nevada 330103-00-07-05-02-00 dry, protect the probe tip and connector, avoid tight cable coils and record the full label so the spare remains traceable to the correct loop.

Q5
What information should be supplied for a Bently Nevada 330103-00-07-05-02-00 quotation?
 

For Bently Nevada 330103-00-07-05-02-00, provide the full nameplate, installed probe and connector photos, extension-cable and Proximitor labels, required condition, quantity and destination.

ABOUT PLCEXPORT
About PLCEXPORT

PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.

Model verification
Model verification

We compare the complete 330103-00-07-05-02-00 identity, revision, connectors and visible condition before quotation.

Technical coordination
Technical coordination

Our team reviews the 330103-00-07-05-02-00 host system, slot, wiring and compatibility requirements.

Inspection and packing
Inspection and packing

The supplied 330103-00-07-05-02-00 markings, connectors and protective packaging are checked before dispatch.

Customer support
Customer support

Myrtle coordinates 330103-00-07-05-02-00 availability, documents, order details and worldwide delivery follow-up.

CONFIGURATION SUPPORT
Planning a 330103-00-07-05-02-00 replacement?
Send the complete 330103-00-07-05-02-00 label, installed-system details, connector and terminal photographs, required condition, quantity and destination. Myrtle will compare identity and compatibility points before quotation.
Email Myrtle
sales5@askplc.com
WhatsApp
+86 18950128464

Hot Tags: bently nevada 330103-00-07-05-02-00 3300 xl 8 mm proximity probe, China bently nevada 330103-00-07-05-02-00 3300 xl 8 mm proximity probe manufacturers, suppliers, 330104 00 08 90 02 05 3300 XL 8 mm Proximity Probe, 330104 00 08 90 02 05 datasheet, 330180 51 05 Extension Cable, 330180-51-05, 330903 00 05 10 01 05 manual, 330903-00-05-10-01-05

Send Inquiry