TECHNICAL DATA
Technical Specifications
AAP149 provides sixteen pulse-count inputs for migrations or maintenance situations that require PM1-compatible behavior. The channels are non-isolated, so common potential, grounding and field interface details deserve special attention before the module is exchanged.
CHANNELS
16 pulse-input channels
COUNT RANGE
Pulse count up to 6 kHz
COMPATIBILITY
PM1-compatible application
ISOLATION
Non-isolated channel architecture
SYSTEM FAMILY
CENTUM VP FIO
REPLACEMENT FOCUS
Common wiring and pulse characteristics
PRODUCT DETAILS
Product Image Display
MODULE LABEL REFERENCE

Confirm the complete identification
Confirm that PM1 compatibility is required for the installed loop.
Match the connected hardware
Check the pulse rate against the 0 to 6 kHz operating range.
Record field wiring and settings
Review shared common and grounding connections.
Plan the commissioning test
Back up channel counting and scaling parameters before removal.
BEFORE REPLACEMENT
Replacement Checks Before Shutdown
CHECK 1
Confirm that PM1 compatibility is required for the installed loop
Confirm that PM1 compatibility is required for the installed loop.
CHECK 2
Check the pulse rate against the 0 to 6 kHz operating range
Check the pulse rate against the 0 to 6 kHz operating range.
CHECK 3
Review shared common and grounding connections
Review shared common and grounding connections.
CHECK 4
Back up channel counting and scaling parameters before removal
Back up channel counting and scaling parameters before removal.
TECHNICAL ANSWERS
Frequently Asked Questions
What distinguishes AAP149 from AAP135?
AAP149 has sixteen non-isolated channels and supports pulse counting up to 6 kHz, while AAP135 has eight isolated channels and a higher count range.
Is AAP149 intended for PM1-related replacement work?
Yes. Yokogawa identifies it as a PM1-compatible pulse input module.
What is the key wiring precaution?
Because the channels are non-isolated, verify the common potential and grounding arrangement.
Which details should be recorded before the existing AAP149 is removed?
Record the full label code, connected module or terminal hardware, channel-to-terminal mapping, field-supply details and the cabinet location. Photographs should support, not replace, the approved wiring drawing.
What should technicians verify during commissioning?
Check power and diagnostics first, then prove each affected channel from the field side to the control-system indication or output. Confirm scaling, polarity, alarms and redundancy behavior where applicable.
What information is needed to confirm the correct replacement?
Provide clear label photos, the complete model and suffix, associated I/O or terminal-unit code, quantity, destination and any required certificates. Do not order from the base model alone.
CONTACT
Confirm AAP149 Before Ordering
Send the complete label code, connected hardware, quantity and destination for a practical configuration review.
SALES CONTACT
Myrtle
Myrtle
WHATSAPP
+86 18950128464
+86 18950128464
EMAIL
sales5@askplc.com
sales5@askplc.com
ABOUT PLCEXPORT
Configuration review for AAP149
Sales and sourcing teams review the requested model, connection hardware, quantity and destination details before dispatch planning.
RELATED REFERENCES
Recommended Models
Reference groups are unique to this product page. Confirm compatibility independently; model similarity does not establish interchangeability.
Siemens Product References
Siemens automation references for maintenance searches and catalog navigation; they are not direct substitutes for AAP149.
6ES7521-1BL00-0AB0
6ES7518-4FP00-0AB0
6ES7518-4AX00-1AC0
6ES7518-4FX00-1AC0
6ES7511-1TK01-0AB0
6ES7513-1RL00-0AB0
6ES7532-5HD00-0AB0
6ES7518-4AP00-0AB0
6ES7416-5HS06-0AB0
6ES7414-5HM06-0AB0
6ES7321-1BL00-0AA0
6ES7322-1BL00-0AA0
6ES7331-7KF02-0AB0
6ES7332-5HD01-0AB0
6ES7155-6AU01-0BN0
6ES7131-6BH01-0BA0
Allen-Bradley Product References
Allen-Bradley controller and I/O references for cross-brand maintenance searches; confirm platform and wiring independently.
1756-OA16
1746-NIO4V
1746-ITB16
1756-L55M22
1756-L64
1756-OA16I
1756-PB75R
1756-IA16I
1756-IB16
1756-IB16D
1756-L84ES
1756-L85E
1756-IF8
1756-OF8
1756-EN2T
1756-EN3TR
Other PLC & DCS Brands
Additional controller and I/O references from other automation brands; no cross-brand item should be treated as a pin-compatible replacement.
Horner HE-XE1E6
Horner HE-XC1E2
Horner HE-X2A
Horner HE-X2R
Unitronics USC-B10-RA28
Unitronics USC-B10-T42
Unitronics USC-B10-TA30
Unitronics USC-B10-TR22
ODOT CT-3734
ODOT CT-3744
ODOT CT-4154
ODOT CT-4158
SIGMATEK RO 041
SIGMATEK RO 051
SIGMATEK AI 022
SIGMATEK AI 022-1
ICP DAS LP-5231
ICP DAS WP-2241-CE7
ICP DAS LP-2241
ICP DAS WP-5000
Bachmann GIO212
Bachmann AIO208
Bachmann AIO216
Bachmann AIO208/SI
WAGO 750-430
WAGO 750-530
Beckhoff EL1008
Beckhoff EL2008
Fatek FBs-20MN
Fatek FBs-32MN
Fatek FBs-44MN
Fatek FBs-24XY
Hot Tags: yokogawa aap149 16-channel pm1-compatible pulse input module, China yokogawa aap149 16-channel pm1-compatible pulse input module manufacturers, suppliers

