GE IC695PNS001-BBBB RX3i PROFINET Scanner
RX3i PROFINET I/O scanner with four switched network ports, SD-card device-name transfer and firmware revision 3.01.
|
New & original
|
One-year warranty
|
3-5 days
|
Condition: In stock
|
Request a quote |
What matters when specifying IC695PNS001-BBBB
|
PACSystems RX3i PROFINET scanner module
IC695PNS001-BBBB is the complete supplied identity for this pacsystems rx3i profinet scanner module.
|
Official documentation
Content is based on Emerson RX3i PROFINET Scanner IPI GFK-2738 and User Manual GFK-2737; verify the latest revision for the installed system.
|
Project compatibility
Check rack or station type, power budget, wiring, firmware and terminal hardware before replacement.
|
Full suffix control
Order IC695PNS001-BBBB by its complete label; do not reduce it to IC695PNS001 without a revision check.
|
Description and purpose
|
IC695PNS001-BBBB is a B-series RX3i PROFINET scanner at documented firmware revision 3.01. It manages communications and module configuration between a PROFINET I/O Controller and the modules installed in its remote RX3i rack. The four-port network interface combines two 10/100/1000 Mbps RJ45 ports with two SFP cages and supports line, star and MRP ring topologies. The BBBB hardware change increased isolation between earth ground and signal ground; preserve the GSDML, I/O device name, SD-card data and rack configuration during replacement. |
Purchase verification
Send the complete IC695PNS001-BBBB label, clear front and connector photos, installed rack or station details, terminal hardware, field wiring, power information, quantity and destination. Compare every suffix before quotation.
|
Technical specifications
Restated from Emerson RX3i PROFINET Scanner IPI GFK-2738 and User Manual GFK-2737. Confirm the complete IC695PNS001-BBBB nameplate and the latest installation documentation before replacement.
Planning a IC695PNS001-BBBB replacement?
|
Share the full IC695PNS001-BBBB nameplate, rack or station configuration, power and wiring details, terminal hardware, firmware or option settings, fault symptoms, photographs, quantity and destination. Myrtle will compare identity and compatibility points before quotation.
|
Email Myrtle sales5@askplc.com |
WhatsApp +86 18950128464 |
Applications
|
Remote RX3i I/O
Connects an RX3i I/O rack to a PROFINET controller.
|
Mixed-media PROFINET
Uses copper and supported SFP media in line, star or MRP ring layouts.
|
SD-card replacement
Transfers the configured I/O device name when replacing a documented scanner.
|
Maintenance replacement
Restores an IC695PNS001-BBBB rack after GSDML, firmware and I/O checks.
|
Ordering information
|
Payment
100% advance before shipping
|
Port
Xiamen
|
Delivery time
3-5 days
|
Condition
In stock
|
Carrier selection is arranged according to destination, shipment size and buyer requirements.
|
DHL
Express
|
UPS
Worldwide
|
FedEx
Priority
|
TNT
International
|
ARAMEX
Logistics
|
SF Express
Asia network
|
Product image and identification notes
|
PHOTO VERIFICATION
Confirm the exact IC695PNS001-BBBB in the photographs
Use clear front, side, label, connector and terminal photographs. The complete IC695PNS001-BBBB suffix, revision, safety markings, terminal hardware and physical condition must remain readable and should be compared with the installed project.
Front labelSide viewConnector detailTerminal hardware
|
![]() |
FAQ about IC695PNS001-BBBB
|
What is the documented firmware revision for IC695PNS001-BBBB?
IC695PNS001-BBBB is listed by Emerson with primary firmware revision 3.01. Before replacing IC695PNS001-BBBB, archive the GSDML revision, I/O device name, SD-card contents and controller configuration.
|
Which network ports does IC695PNS001-BBBB provide?
IC695PNS001-BBBB provides four switched external ports: two shielded RJ45 copper interfaces and two SFP cages. Confirm the IC695PNS001-BBBB port media, link speed and MRP ring assignments before migration.
|
|
How much I/O data can IC695PNS001-BBBB handle?
IC695PNS001-BBBB supports up to 1440 bytes of input data and 1440 bytes of output data per station. Verify that the complete IC695PNS001-BBBB module list and configured data sizes remain within those limits.
|
How is the PROFINET device name preserved on IC695PNS001-BBBB?
IC695PNS001-BBBB supports SD or SDHC media for transferring the I/O device name to a replacement scanner. Check the IC695PNS001-BBBB card, device-name record and controller connection before restart.
|
|
What changed with the IC695PNS001-BBBB hardware revision?
Emerson states that IC695PNS001-BBBB increased isolation between earth ground and signal ground and retained firmware revision 3.01. Match the complete IC695PNS001-BBBB suffix when a documented spare is required.
|
What information is needed to quote IC695PNS001-BBBB?
For IC695PNS001-BBBB, send the full BBBB label, firmware, GSDML version, controller model, backplane and power supply, I/O module list, SFP types, port layout, SD-card status, quantity and destination.
|
About PLCEXPORT
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.
Recommended models
Recommended product families are grouped by brand. Send the complete catalog number and revision when requesting availability.
Schneider Electric
Honeywell
|
DIRECT SALES SUPPORT
Confirm the exact IC695PNS001-BBBB before orderingSend the complete label, installed configuration, wiring, photographs, quantity and destination. Myrtle will review identity and compatibility points before quotation. |
Email Myrtle sales5@askplc.com |
WhatsApp +86 18950128464 |
Hot Tags: ge ic695pns001-bbbb rx3i profinet scanner, China ge ic695pns001-bbbb rx3i profinet scanner manufacturers, suppliers, GE Fanuc IC695CEP001, GE Fanuc IC695CPE302, ge pac systems rx3i, IC695CEP001, IC695CEP001 CEP Carrier Module, IC695CPE302 CPU module


