GE IC695HSC304-FA RX3i 4-Counter HSC Module
Four-counter RX3i high-speed module with eight inputs, seven outputs, configurable counter types and count rates up to 1.5 MHz.
|
New & original
|
One-year warranty
|
3-5 days
|
Condition: In stock
|
Request a quote |
What matters when specifying IC695HSC304-FA
|
four-channel high-speed counter module
IC695HSC304-FA is the complete supplied identity for this four-channel high-speed counter module.
|
Official documentation
Content is based on Emerson High-Speed Counter Module User Manual GFK-2441; verify the latest revision for the installed system.
|
Project compatibility
Check rack or station type, power budget, wiring, firmware and terminal hardware before replacement.
|
Full suffix control
Order IC695HSC304-FA by its complete label; do not reduce it to IC695HSC304 without a revision check.
|
Description and purpose
|
IC695HSC304-FA is an FA revision of the RX3i HSC304 high-speed counter family. It provides four configurable counters, eight external inputs and seven protected outputs for counting, measurement, programmable limit-switch and motion-related machine functions. Counter types A, B, C, D, E, Z and user-defined are supported. Maximum count rate is 1.5 MHz for most configurations, with documented limits for Type C or user-defined four-input modes. Input voltage, filtering, output loading and terminal wiring must be duplicated from the installed design. |
Purchase verification
Send the complete IC695HSC304-FA label, clear front and connector photos, installed rack or station details, terminal hardware, field wiring, power information, quantity and destination. Compare every suffix before quotation.
|
Technical specifications
Restated from Emerson High-Speed Counter Module User Manual GFK-2441. Confirm the complete IC695HSC304-FA nameplate and the latest installation documentation before replacement.
Planning a IC695HSC304-FA replacement?
|
Share the full IC695HSC304-FA nameplate, rack or station configuration, power and wiring details, terminal hardware, firmware or option settings, fault symptoms, photographs, quantity and destination. Myrtle will compare identity and compatibility points before quotation.
|
Email Myrtle sales5@askplc.com |
WhatsApp +86 18950128464 |
Applications
|
Encoder counting
Reads high-frequency pulse and quadrature encoder signals for position or speed.
|
Programmable limit switching
Drives outputs from counter setpoints for accurate machine events.
|
Pulse-width and period measurement
Measures timing characteristics for sensors, conveyors and rotating equipment.
|
Maintenance replacement
Restores a documented IC695HSC304-FA counter configuration and terminal map.
|
Ordering information
|
Payment
100% advance before shipping
|
Port
Xiamen
|
Delivery time
3-5 days
|
Condition
In stock
|
Carrier selection is arranged according to destination, shipment size and buyer requirements.
|
DHL
Express
|
UPS
Worldwide
|
FedEx
Priority
|
TNT
International
|
ARAMEX
Logistics
|
SF Express
Asia network
|
Product image and identification notes
|
PHOTO VERIFICATION
Confirm the exact IC695HSC304-FA in the photographs
Use clear front, side, label, connector and terminal photographs. The complete IC695HSC304-FA suffix, revision, safety markings, terminal hardware and physical condition must remain readable and should be compared with the installed project.
Front labelSide viewConnector detailTerminal hardware
|
![]() |
FAQ about IC695HSC304-FA
|
How many counters and I/O points does IC695HSC304-FA provide?
IC695HSC304-FA provides four counter channels, eight external inputs and seven external outputs. Preserve the IC695HSC304-FA terminal assignments and output-source mapping during replacement.
|
What maximum count rate is supported by IC695HSC304-FA?
IC695HSC304-FA supports up to 1.5 MHz for most counter types. Type C or user-defined modes that use four counter inputs have a documented 750 kHz limit, so validate the IC695HSC304-FA configuration.
|
|
Which counter modes can IC695HSC304-FA use?
IC695HSC304-FA can be configured for Types A, B, C, D, E, Z and user-defined counting. Archive the exact IC695HSC304-FA mode, filter, preload, limits and setpoints before removal.
|
What input levels are supported by IC695HSC304-FA?
IC695HSC304-FA supports documented 5 VDC nominal inputs and 12-24 VDC nominal inputs. Confirm the IC695HSC304-FA terminal selection, sensor output type, common reference and shielding before energizing.
|
|
How should IC695HSC304-FA output loading be checked?
IC695HSC304-FA outputs operate from 4.7 to 40 VDC with a 1.5 A maximum per channel, subject to module and thermal limits. Verify every IC695HSC304-FA load, field supply and fault-detection requirement.
|
What information is needed to quote IC695HSC304-FA?
For IC695HSC304-FA, send the complete FA label, firmware, counter types, input voltages, filters, setpoints, output loads, terminal photographs, rack and power details, quantity and destination.
|
About PLCEXPORT
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.
Recommended models
Recommended product families are grouped by brand. Send the complete catalog number and revision when requesting availability.
Schneider Electric
Honeywell
|
DIRECT SALES SUPPORT
Confirm the exact IC695HSC304-FA before orderingSend the complete label, installed configuration, wiring, photographs, quantity and destination. Myrtle will review identity and compatibility points before quotation. |
Email Myrtle sales5@askplc.com |
WhatsApp +86 18950128464 |
Hot Tags: ge ic695hsc304-fa rx3i 4-counter hsc module, China ge ic695hsc304-fa rx3i 4-counter hsc module manufacturers, suppliers, GE Fanuc IC695CEP001, GE Fanuc IC695CPE302, GE IC695CEP001, GE IC695CPE302, IC695CEP001 CEP Carrier Module, IC695CPE302


