GE IC695CHS007 RX3i 7-Slot Universal Backplane
Compact seven-slot RX3i universal backplane supporting PCI-based RX3i modules and compatible serial-bus I/O modules.
Description and purpose
The IC695CHS007 is the smallest PACSystems RX3i universal backplane. It provides seven numbered positions and supports RX3i PCI-bus modules together with compatible IC693/IC694 serial-bus modules under defined slot rules.
Slot 0 is reserved for an IC695 power supply. Slots 1–5 accept compatible PCI or serial modules, while slot 6 is limited to a single-width IC695 PCI module. Layout must therefore be checked before moving a rack design to this compact chassis.
Send the IC695CHS007 label, complete slot map, CPU and power-supply models, any IC693/IC694 modules and expansion hardware. We will check slot and bus compatibility.
Technical specifications
Concise values checked against Emerson PACSystems RX3i System Manual GFK-2716. Confirm the complete suffix and system configuration before replacement.
Need a careful IC695CHS007 compatibility check?
Myrtle
Suffix and compatibility
Applications
Ordering information
T/T
Xiamen
3–5 days
In stock
Product image and identification notes

What buyers should verify in the photos
Check the IC695CHS007 part label, all seven slot connectors, power-supply position, grounding bar, mounting points and isolated 24 V terminal.
Photograph the complete existing slot map. A seven-slot rack can still be incompatible if a serial module is placed in slot 6 or an unsupported expansion transmitter is specified.
FAQ about GE IC695CHS007
Can I install an RX3i CPU in any slot of IC695CHS007?
Follow the CPU and system manual. Slot 0 is reserved for the IC695 power supply; slots 1–5 provide the broadest PCI/serial compatibility, while slot 6 is PCI-only and single-width.
Will IC695CHS007 accept my existing IC693 and IC694 modules?
Many compatible serial-bus modules can be used in slots 1–5, but not every legacy module is supported. Check each catalog number and note that IC695LRE001 is excluded.
Why is slot 6 different on IC695CHS007?
GE defines slot 6 for a single-width IC695 PCI module only. Do not place a Series 90 serial-bus module or a double-width device there.
Can IC695CHS007 use a Series 90-30 power supply?
No. Slot 0 is specified for an IC695 power supply. Match the power-supply model and calculate the complete rack load before installation.
What should be checked when replacing a damaged IC695CHS007 backplane?
Inspect every module connector, grounding, isolated 24 V wiring and panel mounting. Record the slot map and check modules for connector damage caused by the original fault.
What information should I send for an IC695CHS007 quotation?
Provide the chassis label, slot-by-slot module list, CPU, power supply, expansion arrangement, quantity, mounting condition and destination.
About PLCEXPORT
PLCEXPORT supports automation maintenance and project teams with model identification, practical compatibility checks and international supply coordination. Our China team reviews labels and order details before dispatch preparation.
Recommended models
Published product references are grouped by brand; each card shows the model only. This mix is arranged specifically for the IC695CHS007 page.
ABB - published product references
Siemens - published product references
Others - other recommended brands
Need help sourcing a difficult automation part?
Share the complete model, suffix, quantity and delivery destination with Sales Manager Myrtle. We can compare identification details before preparing a supply option.
Hot Tags: ge ic695chs007 rx3i 7-slot universal backplane, China ge ic695chs007 rx3i 7-slot universal backplane manufacturers, suppliers, GE Fanuc IC695CEP001, GE Fanuc IC695CPE302, GE IC695CEP001, GE IC695CPE302, IC695CEP001, IC695CPE302

