GE IC693CBK001A Series 90-30 High-Density I/O Cable Kit

GE IC693CBK001A Series 90-30 High-Density I/O Cable Kit

SERIES 90-30 · CABLE KIT REVISION A

GE IC693CBK001A Series 90-30 High-Density I/O Cable Kit

Revision-A cable kit for the two front connectors used by compatible 32-point Series 90-30 I/O modules.

New & originalOne-year warranty3–5 daysCondition: In stock
Send Inquiry
Description
SERIES 90-30 · CABLE KIT REVISION A

GE IC693CBK001A Series 90-30 High-Density I/O Cable Kit

Revision-A cable kit for the two front connectors used by compatible 32-point Series 90-30 I/O modules.

Description and purpose

IC693CBK001A identifies the revision-A supply of the IC693CBK001 high-density I/O cable kit. Its job remains the same: provide the left and right cable paths required by compatible 32-point Series 90-30 modules.

Treat the A suffix as part of the nameplate. Compare both supplied cable labels, connector keying and length with the installed kit; the base number alone does not confirm that the delivered revision matches the maintenance record.

Purchase verification

Send the complete IC693CBK001A label, installed-system details and project context. We will compare the supplied revision and interface before quotation.

Technical specifications

Values summarized from GE Fanuc Series 90-30 I/O specifications and cabling documentation. Confirm the complete IC693CBK001A nameplate for the supplied revision.

Model
IC693CBK001A
Manufacturer
GE
Country of origin
United States
Product family
Series 90-30 PLC
Product type
High-Density I/O Cable Kit, revision A
Catalog number
IC693CBK001A
Product form
Matched left/right cable kit
Cable assemblies
IC693CBL327 and IC693CBL328 family
Nominal length
3 m (10 ft) per cable
Connector side
Two high-density module connectors
Use with
Selected 32-point Series 90-30 I/O modules
Installation check
Verify left/right connector position
Revision control
Confirm complete A-suffix nameplate
CONFIGURATION SUPPORT

Planning a revision-controlled cable kit replacement?

Share the complete IC693CBK001A nameplate, installed hardware details, configuration, quantity and destination with Sales Manager Myrtle. We will review the stated application and flag details that still need confirmation.

Sales Manager
Myrtle
Model review
Suffix and revision
System check
Before quotation

Applications

Revision-controlled spare replacement

Use the documented configuration and confirm installed-system compatibility before replacement.

32-point discrete I/O cabinet work

Use the documented configuration and confirm installed-system compatibility before replacement.

Panel terminal breakout wiring

Use the documented configuration and confirm installed-system compatibility before replacement.

Ordering information

Payment
T/T
Port
Xiamen
Lead time
3–5 days
Condition
In stock
BUYER QUESTIONS

FAQ about GE IC693CBK001A

How do I know whether IC693CBK001A is the correct replacement for my installed hardware?

Compare the complete nameplate, suffix, rack position, firmware or revision information, field connections and the project configuration. For a revision-controlled cable kit, matching only the base family can leave an interface or configuration mismatch.

What information should I send before requesting a quotation for IC693CBK001A?

Send clear front and side label photos, the controller or rack model, installed slot, connected devices, required quantity, destination and a short description of the fault. These details let us check the supplied revision against the actual system.

Can I install IC693CBK001A without changing the PLC project?

Do not assume a drop-in exchange. Preserve the existing hardware configuration and operating parameters, then verify the replacement revision in the applicable GE engineering software and manual before energizing the rack.

Which installation detail causes the most trouble with IC693CBK001A?

The common risk is overlooking the exact connector, termination, slot, firmware or mode that the existing application relies on. Photograph wiring and record software settings before removal so the replacement can be restored methodically.

What should maintenance teams check when IC693CBK001A is received?

Inspect the full catalog number and suffix, connector condition, housing, labels and package condition. Compare these with the purchase record before installation; do not use appearance alone to approve interchangeability.

Which documentation should be reviewed for IC693CBK001A?

Use GE Fanuc Series 90-30 I/O specifications and cabling documentation. The equipment nameplate and the installed project remain the final references because manuals can cover several revisions and configurations.

About PLCEXPORT

PLCEXPORT supports automation maintenance and project teams with model identification, compatibility checks and international supply coordination. Our China team reviews labels and order details before dispatch preparation.

 
Technical discussion

Our team compares system context, suffixes and interface details before quotation.

 
PLCEXPORT team

Colleagues coordinate identification, commercial follow-up and shipping details.

 
Packing inspection

Product identity and package condition are checked during order preparation.

 
China operations

Local coordination supports sourcing, documentation and international dispatch.

Recommended models

Published product references are grouped by brand; each card shows the model only.

GE - published product references

HONEYWELL - published product references

Others - other recommended brands

Elmo G-MAS
Festo CPX-E-CEC
Gefran GFX4-IR
Jetter JC-440
Kontron KBox-A-150
Lenze c550
Nidec C200-064
PMA KS98-2
Sorel XHCC
Toshiba V200-16MR
Teco SG2-20VR
Wieland samosPRO
Zander TALOS-TB
Crouzet em4-remote
Hitachi EH-150
Idec FT1A-H40RSA
Koyo DL06
Murrelektronik Cube67
Pilz PNOZmulti 2
Unitronics USC-B10-T24
ICP DAS WP-8441
Fatek FBs-40MA
B&R X20CP1586
Opto 22 GRV-EPIC-PR2
Beckhoff CX9020-0111
Weidmuller u-control 2000
VIPA 315-4NE13
Delta DVP28SV11R2

Need help sourcing IC693CBK001A?

Share the complete model, suffix, quantity and destination with Myrtle for a configuration-aware supply check.

↑ BACK UP TO THE TOP

Hot Tags: ge ic693cbk001a series 90-30 high-density i/o cable kit, China ge ic693cbk001a series 90-30 high-density i/o cable kit manufacturers, suppliers, GE FANUC IC693CPU350, GE IC693CPU331, GE IC693CPU350, IC693CPU331, IC693CPU331 CPU module, IC693CPU350

Send Inquiry