Bently Nevada 330103-00-16-10-02-05 3300 XL 8 mm Proximity Probe

Bently Nevada 330103-00-16-10-02-05 3300 XL 8 mm Proximity Probe

BENTLY NEVADA · 3300 XL 8 MM PROXIMITY TRANSDUCER SYSTEM
Bently Nevada 330103-00-16-10-02-05 3300 XL 8 mm Proximity Probe
Extended-body M10 × 1 3300 XL 8 mm probe with a fully threaded 160 mm case, 1.0 m standard ClickLoc cable and approval code 05 for documented CSA, ATEX and IECEx system applications.
New & original
One-year warranty
3-5 days
Send Inquiry
Description
BENTLY NEVADA · 3300 XL 8 MM PROXIMITY TRANSDUCER SYSTEM
Bently Nevada 330103-00-16-10-02-05 3300 XL 8 mm proximity probe

Extended-body M10 × 1 3300 XL 8 mm probe with a fully threaded 160 mm case, 1.0 m standard ClickLoc cable and approval code 05 for documented CSA, ATEX and IECEx system applications.

New & original
One-year warranty
3-5 days
PRODUCT AT A GLANCE
What matters when specifying 330103-00-16-10-02-05
Mechanical reason to choose it

A 160 mm fully threaded M10 × 1 body provides extended insertion and adjustment for a deep bracket or housing.

Support requirement

Verify bracket rigidity, locknut access, probe side clearance and cable bend radius so the long body is not left vulnerable to vibration or bending.

Certified-loop review

Suffix 05 identifies the approval execution, but the complete installed loop and its drawing determine whether the application is compliant.

Electrical identity

Code 10 supplies a 1.0 m probe length; confirm the remaining system length and the exact connected Proximitor Sensor.

OFFICIAL-DOCUMENT-BASED SUMMARY
Technical specifications

The fields below prioritize the values buyers use for selection. Ratings not traceable to the exact model are intentionally marked for nameplate or project-document verification.

Manufacturer
Bently Nevada, a Baker Hughes business

3300 XL 8 mm system

Complete model
330103-00-16-10-02-05

Retain every suffix

Probe base
330103

M10 × 1 metric thread; unarmored standard cable

Unthreaded length
0 mm

Verify insertion and target geometry

Overall case length
160 mm

Verify bracket and locknut position

Total length
1.0 m (3.3 ft)

Probe plus integral cable

Connector / cable option
miniature coaxial ClickLoc connector, standard cable

Inspect before installation

Agency approval
multiple approvals

Match site documentation

Probe tip diameter
8.0 mm (0.31 in)

Official dimensional drawing

Cable impedance
75 Ω

System component value

Complete-system linear range
2 mm (80 mils)

When correctly matched and installed

Complete-system scale factor
7.87 V/mm (200 mV/mil) ±5%

Under documented reference conditions

Recommended system gap
1.27 mm (50 mils)

Verify with approved procedure

Minimum target diameter
15.2 mm (0.6 in)

Flat target reference

Minimum shaft diameter
50.8 mm (2.0 in)

Official system reference

Buyer selection check
Thread, lengths, connector, armor, approvals and system length

All items must match

INSTALLATION CHECKS
Planning a 330103-00-16-10-02-05 replacement
Certificate-to-loop match

Identify the exact hazardous-area drawing, barrier or isolator, entity parameters and Proximitor Sensor associated with the installed suffix-05 probe.

Mechanical stability

Confirm the 160 mm threaded body is supported, cannot resonate or bend, and still leaves safe wrench, locknut and cable-exit clearance.

Temperature and environment

Compare the actual probe location temperature and area classification with the certificate conditions instead of relying on the approval suffix alone.

Controlled proof test

After replacement, document gap voltage and channel value, then test every affected alarm or shutdown function under the site-approved procedure.

COMMERCIAL DETAILS
Ordering information
PAYMENT

100% advance before shipping

PORT

Xiamen

DELIVERY TIME

3-5 days

CONDITION

New & original; availability confirmed before order

 
LOGISTICS PARTNERS

Carrier selection is arranged according to destination, shipment size and buyer requirements.

DHL
Express
UPS
Worldwide
FedEx
Priority
TNT
International
ARAMEX
Logistics
SF Express
Asia network
IMAGE AND NAMEPLATE REVIEW
Product image and identification notes
PHOTO VERIFICATION
Confirm the exact 330103-00-16-10-02-05 in the photographs

Use clear front, side, nameplate, connector and terminal photographs. The complete 330103-00-16-10-02-05 identity, revision, markings and physical condition must remain readable and be compared with the installed project.

 
Full nameplate
Front and side view
Connector detail
Installed position
102044-00-18-10-02 330103-00-05-05-02-CN 330190-040-01-CN 330103-00-03-10-02-05 330103-00-06-10-02-05 330103-00-16-10-02-05 2
BUYER QUESTIONS
FAQ about 330103-00-16-10-02-05
Q1
Can the approval of Bently Nevada 330103-00-16-10-02-05 be transferred to a different probe suffix?
 

No. The certification associated with Bently Nevada 330103-00-16-10-02-05 does not automatically cover a different body, cable or approval suffix; the exact approved loop must be maintained.

Q2
Can the 160 mm body of Bently Nevada 330103-00-16-10-02-05 be shortened or altered to fit?
 

No. Bently Nevada 330103-00-16-10-02-05 must not be cut, rethreaded or mechanically altered; select the correct documented probe geometry and mounting hardware.

Q3
Can a connector protector simply be added to Bently Nevada 330103-00-16-10-02-05?
 

Bently Nevada 330103-00-16-10-02-05 is ordered with code-02 standard cable. Any added environmental protection must follow the approved installation drawing and must not be treated as a change to the certified model code.

Q4
What proof testing is appropriate after installing Bently Nevada 330103-00-16-10-02-05?
 

After Bently Nevada 330103-00-16-10-02-05 is installed and gapped, verify channel value, alarm action and every affected shutdown function under the site-approved hazardous-area maintenance procedure.

Q5
What documents are required when requesting Bently Nevada 330103-00-16-10-02-05?
 

For Bently Nevada 330103-00-16-10-02-05, provide the full label, certificate and approved wiring drawing, area classification, barrier/isolator and Proximitor details, condition, quantity and destination.

ABOUT PLCEXPORT
About PLCEXPORT

PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.

Model verification
Model verification

We compare the complete 330103-00-16-10-02-05 identity, revision, connectors and visible condition before quotation.

Technical coordination
Technical coordination

Our team reviews the 330103-00-16-10-02-05 host system, slot, wiring and compatibility requirements.

Inspection and packing
Inspection and packing

The supplied 330103-00-16-10-02-05 markings, connectors and protective packaging are checked before dispatch.

Customer support
Customer support

Myrtle coordinates 330103-00-16-10-02-05 availability, documents, order details and worldwide delivery follow-up.

CONFIGURATION SUPPORT
Planning a 330103-00-16-10-02-05 replacement?
Send the complete 330103-00-16-10-02-05 label, installed-system details, connector and terminal photographs, required condition, quantity and destination. Myrtle will compare identity and compatibility points before quotation.
Email Myrtle
sales5@askplc.com
WhatsApp
+86 18950128464

Hot Tags: bently nevada 330103-00-16-10-02-05 3300 xl 8 mm proximity probe, China bently nevada 330103-00-16-10-02-05 3300 xl 8 mm proximity probe manufacturers, suppliers, 330103 06 25 10 02 00 3300 XL 8 mm Proximity Probes, 330104 00 08 90 02 05 3300 XL 8 mm Proximity Probe, 330180 51 05 manual, bently nevada 3300 series and 3300 xl proximity probe, Bently Nevada 330103 06 25 10 02 00, Bently Nevada 330180 51 05

Send Inquiry