SM AQ02 Selection Highlights
Declare output mode
Mark each channel as voltage or current in drawings and software.
Check the load
Respect minimum voltage-load and maximum current-load impedance.
Plan safe values
Define startup, stop and communication-loss output behavior.
Prove the full span
Measure commanded low, mid and high values at the receiver.
Actual Product Detail
Correct selection boundary
Confirm voltage versus current mode and the receiving-device impedance before connecting either channel.
SM AQ02 Technical Parameters
SM AQ02 supplies two analog setpoints for drives, positioners and other voltage/current controlled devices.
SM AQ02 Verification Sequence
- 01Verify 24 V DC supply.
- 02Check output mode and load.
- 03Command three test points.
- 04Record safe-state behavior.
SM AQ02 FAQ · Interactive
What does AQ02 provide?
Two configurable analog output channels.
Which voltage range is supported?
The module supports −10 V to +10 V output.
Which current range is supported?
The documented current range is 0–20 mA.
What load limits apply?
Voltage loads should be at least 1 kΩ; current loads up to 500 Ω are specified.
Does the module provide diagnostics?
Siemens lists supply, wire-break and short-circuit diagnostics.
What should be supplied for quotation?
Send the full MLFB, quantity, destination and required signal mode.
Recommended Siemens Models
Others · Selected Models
About PLC EXPORT
PLC EXPORT supplies industrial automation components worldwide. Send the 6ES7288-3AQ02-0AA0 label, quantity and destination for a checked quotation.
Part-number check · Fast response · International supply
CONTACT US
Subject: SIEMENS 6ES7288-3AQ02-0AA0 SIMATIC S7-200 SMART SM AQ02
Hot Tags: siemens 6es7288-3aq02-0aa0 simatic s7-200 smart sm aq02, China siemens 6es7288-3aq02-0aa0 simatic s7-200 smart sm aq02 manufacturers, suppliers, 6ES7 315 2AH14 0AB0, 6ES7317 2EK14 0AB0 Siemens, siemens, Siemens 6ES7 315 2AH14 0AB0, Siemens 6ES7317 2EK14 0AB0, simatic s7 series
