HIMA HIMatrix F3 DIO 8/8 01 safety remote digital I/O
SIL 3 / Cat. 4 / PL e HIMatrix remote I/O with 8 digital inputs, 8 digital outputs and an integrated two-port 100BASE-TX safeethernet switch.
What matters when specifying HIMatrix F3 DIO 8/8 01
Complete identity
Match every character in HIMatrix F3 DIO 8/8 01, including suffixes and revision markings.
Installed-system basis
HIMatrix F3 DIO 8/8 01 compatibility depends on the documented host system, slot and wiring.
Customer selection check
Confirm 8 DI, 6 standard DO plus 2 two-pole DO, 24 V DC supply, safeethernet settings and temperature execution.
Replacement planning
Record labels, connectors, settings and diagnostics before removing HIMatrix F3 DIO 8/8 01.
Description and purpose
Documented purpose
F3 DIO 8/8 01 provides distributed safety-related digital I/O over safeethernet. HIMA documents eight digital inputs with configurable line control, six standard digital outputs and two two-pole digital outputs.
Replacement caution
Confirm standard versus extended-temperature execution, resource version, safeethernet addressing, line-control parameters, output loads and proof-test documentation before replacement.
Technical specifications
The fields below prioritize the values buyers use for selection. Ratings not traceable to the exact model are intentionally marked for nameplate or project-document verification.
HIMatrix safety remote I/O
F3 DIO 8/8 01
8
Configurable line control
8 total
6 standard plus 2 two-pole outputs
2-port 100BASE-TX switch
safeethernet
SIL 3 / Category 4 / PL e
Per HIMA certification
20.4 to 28.8 V DC
IECEx technical data
0 to 60 °C standard execution
Extended variants differ
Supported / configurable
Verify project settings
Remote I/O station
Record resource and addressing
Execution, I/O wiring, network, firmware and proof-test record
All must match
Planning a HIMatrix F3 DIO 8/8 01 replacement
Nameplate record
Photograph the complete HIMatrix F3 DIO 8/8 01 label and all revision markings.
Connector control
Label every plug, terminal and cable before removal; preserve keying and grounding.
Project verification
Compare the host rack, channel allocation, supply and configuration with approved drawings.
Commissioning
Use the manufacturer procedure to verify diagnostics and every affected signal or safety function.
Applications
Emergency shutdown I/O
Connects safety sensors and final elements.
Distributed safety
Places certified I/O near field equipment.
Line monitoring
Supports configured input circuit monitoring.
Replacement maintenance
Restores a verified safeethernet remote station.
Ordering information
100% advance before shipping
Xiamen
3-5 days
New & original; availability confirmed before order
Carrier selection is arranged according to destination, shipment size and buyer requirements.
Product image and identification notes
Confirm the exact HIMatrix F3 DIO 8/8 01 in the photographs
Use clear front, side, nameplate, connector and terminal photographs. The complete HIMatrix F3 DIO 8/8 01 identity, revision, markings and physical condition must remain readable and be compared with the installed project.

FAQ about HIMatrix F3 DIO 8/8 01
What is HIMatrix F3 DIO 8/8 01 used for?
HIMatrix F3 DIO 8/8 01 is a HIMA HIMatrix safety remote I/O device with 8 digital inputs and 8 digital outputs. Its exact duty must be confirmed against the installed-system documentation.
Which system uses HIMatrix F3 DIO 8/8 01?
HIMatrix F3 DIO 8/8 01 belongs to HIMA HIMATRIX. Confirm the controller, rack or remote-I/O execution before ordering.
What specifications matter when selecting HIMatrix F3 DIO 8/8 01?
For HIMatrix F3 DIO 8/8 01, verify confirm 8 di, 6 standard do plus 2 two-pole do, 24 v dc supply, safeethernet settings and temperature execution. Do not select a replacement from appearance alone.
Can HIMatrix F3 DIO 8/8 01 replace a similar module directly?
HIMatrix F3 DIO 8/8 01 should only replace another unit after the full model, revision, host-system compatibility, connector arrangement and project approval have been confirmed.
Can HIMatrix F3 DIO 8/8 01 be removed while energized?
HIMatrix F3 DIO 8/8 01 must only be removed under the approved isolation, stored-energy and safety procedure for the installed system.
How should HIMatrix F3 DIO 8/8 01 be commissioned?
After installing HIMatrix F3 DIO 8/8 01, verify seating, supply, configuration and diagnostics, then function-test every affected channel under the approved procedure.
What photographs are required for HIMatrix F3 DIO 8/8 01?
For HIMatrix F3 DIO 8/8 01, provide the complete nameplate, front and side views, connector area, installed slot, adjacent hardware and terminal labels.
What should be sent for a HIMatrix F3 DIO 8/8 01 quotation?
Send the full HIMatrix F3 DIO 8/8 01 identity, revision, host system, slot, connector and wiring photographs, required condition, quantity and destination.
About PLCEXPORT
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.
Model verification
We compare the complete HIMatrix F3 DIO 8/8 01 identity, revision, connectors and visible condition before quotation.
Technical coordination
Our team reviews the HIMatrix F3 DIO 8/8 01 host system, slot, wiring and compatibility requirements.
Inspection and packing
The supplied HIMatrix F3 DIO 8/8 01 markings, connectors and protective packaging are checked before dispatch.
Customer support
Myrtle coordinates HIMatrix F3 DIO 8/8 01 availability, documents, order details and worldwide delivery follow-up.
Planning a HIMatrix F3 DIO 8/8 01 replacement?
sales5@askplc.comWhatsApp
+86 18950128464
Recommended models
Bently Nevada
HIMA
Hot Tags: hima himatrix f3 dio 8/8 01 safety remote i/o, China hima himatrix f3 dio 8/8 01 safety remote i/o manufacturers, suppliers, F60 MI 24 01, HIMA HIMatrix F35 011, HIMA HIMatrix F60, HIMA HIMatrix F60 MI, hima himatrix series, HIMatrix F60 MI 24 01

