GE IC695CPE310-BHAE PACSystems RX3i Controller

GE IC695CPE310-BHAE PACSystems RX3i Controller

GE · PACSYSTEMS RX3i CONTROLLER
IC695CPE310-BHAE PACSystems RX3i Controller
13 MB RX3i controller, dual Gigabit Ethernet, serial communication and firmware 11.01 hardware release.
New & original
One-year warranty
3–5 days
Condition: In stock
Send Inquiry
Description
GE PACSYSTEMS RX3i CONTROLLER

GE IC695CPE310-BHAE PACSystems RX3i Controller

A backplane-mounted RX3i controller with 13 MB user memory, dual Gigabit Ethernet, serial communication and the March 2025 BHAE hardware release.

New & original
One-year warranty
3–5 days
Condition: In stock
Request a quote

Description and purpose

IC695CPE310-BHAE is a PACSystems RX3i CPU for real-time machine, process and material-handling control. It exchanges data with programming stations and HMI/SCADA systems through embedded Ethernet or serial communication while controlling local and remote I/O through the RX3i architecture.

The BHAE catalog suffix matters during replacement: GE lists it as the March 2025 release with firmware 11.01. The hardware change does not alter form, fit or function, but backplane revision, project type, firmware baseline and connected communication modules must be checked before installation.

Purchase verificationMatch the complete BHAE nameplate, firmware, Energy Pack and RX3i backplane suffix. Do not select the CPU from the CPE310 base number alone.

Technical specifications

Values checked against GE product data and GFK-3248K for the CPE310-Bxxx platform. Final selection must follow the complete catalog number and installed system.

Model
IC695CPE310-BHAE
Manufacturer
GE
Country of origin
United States
Product family
PACSystems RX3i
Product type
Backplane-mounted programmable automation controller
Hardware release
-BHAE; manufacturing change with no change to form, fit or function
Release / firmware
March 2025 · Version 11.01 (EQVQ)
User memory
13 MB
Non-volatile flash
13 MB
Discrete reference tables
32K bits each for %I and %Q
Analog reference tables
Up to 32K words each for %AI and %AQ
Program capacity
Up to 512 blocks; maximum 128 KB per block
Embedded Ethernet
Two Gigabit Ethernet ports
Ethernet protocols
SRTP, Modbus TCP/IP, OPC UA, EGD, PROFINET, DNP3, IEC 61850 client, IEC 104 server, HART pass-through
Serial communication
Two COM ports; ASCII and Modbus RTU support
USB interface
1 × USB-A 2.0 for removable data storage
Energy Pack
IC695ACC400 supports battery-less retention during power loss
Remote I/O
Up to 255 simplex devices with IC695PNC001
Operating temperature
0–60 °C
Required backplane baseline
IC695CHS007-AA, CHS012-CA or CHS016-CA and later; -JC or later requires firmware 10.85+
Main-rack restriction
Series 90-30 main racks cannot be used as an RX3i main rack
Reference
GE GFK-3248K and PACSystems RX3i documentation
RX3i CONTROLLER SUPPORT

Replacing a controller in an active RX3i system?

Send Sales Manager: Myrtle the complete IC695CPE310-BHAE nameplate, installed firmware, PME project version, backplane suffix, Energy Pack model, network topology, fault symptoms, quantity and destination. We will review the stated configuration before quotation.
What we checkHardware suffix · firmware · rack baseline · project migration · communications

Applications

Machine and process controlRun deterministic RX3i logic while coordinating rack I/O, intelligent modules and remote devices.
Plant modernizationReplace an earlier CPE310 platform after checking the project, firmware and backplane migration path.
Network integrationExchange data with HMI, SCADA and peer systems through OPC UA, SRTP, Modbus TCP, EGD and supported industrial protocols.
Material handlingCoordinate distributed equipment where local rack control and remote PROFINET I/O must remain within one PACSystems project.

Ordering information

Payment
T/T
Port
Xiamen
Lead time
3–5 days
Condition
In stock
BUYER QUESTIONS

FAQ about GE IC695CPE310-BHAE

How can I confirm that IC695CPE310-BHAE is the exact revision my RX3i project needs?

Use the full catalog number, not only CPE310. GE identifies -BHAE as the March 2025 hardware release supplied with firmware 11.01 (EQVQ). The -BH hardware change does not alter form, fit or function, but project, firmware and backplane compatibility must still be checked before replacement.

Can IC695CPE310-BHAE replace an older IC695CPE310-Axxx controller without changing the rack?

GE describes CPE310-Bxxx as a drop-in replacement for CPE310-Axxx when the supported RX3i hardware baseline is met. However, legacy projects configured as CPU310 are not automatically supported, and an application modified for the 13 MB B-platform may not be transferable back to an older A-platform.

Which RX3i backplane details should I check before ordering IC695CPE310-BHAE?

Confirm the exact backplane catalog number and hardware suffix. GE lists IC695CHS007-AA, IC695CHS012-CA and IC695CHS016-CA or later revisions; -JC and later backplanes require controller firmware 10.85 or newer. A Series 90-30 main rack cannot be used as the RX3i main rack.

Does IC695CPE310-BHAE retain the control program after a power interruption?

The controller provides 13 MB of non-volatile flash. When configured with the IC695ACC400 Energy Pack, it can retain user memory without a battery by writing the active memory to non-volatile storage as power is lost. Confirm that the Energy Pack and cable are included and serviceable.

What should I verify before connecting IC695CPE310-BHAE to an existing Ethernet network?

Check the stored hardware configuration, IP addressing, protocol load and firmware of connected PNC, PNS and Ethernet modules. If the controller is intentionally configured as a legacy CPU310, GE instructs that its Ethernet port must not be connected to a network.

What information should I send for an IC695CPE310-BHAE replacement quotation?

Send clear front and side nameplate photos, the complete catalog and firmware revision, PAC Machine Edition project version, backplane model and suffix, slot, Energy Pack model, Ethernet/serial topology, connected PROFINET modules, current fault symptoms, quantity and destination.

About PLCEXPORT

PLCEXPORT supports automation maintenance and project teams with model identification, practical compatibility checks and international supply coordination. Our China team reviews labels and order details before dispatch preparation.

 
Technical discussion
Our team compares system context, suffixes and interface details before quotation.
 
PLCEXPORT team
Colleagues coordinate identification, commercial follow-up and shipping details.
 
Packing inspection
Product identity and package condition are checked during order preparation.
 
China operations
Local coordination supports sourcing, documentation and international dispatch.

Need help sourcing a difficult automation part?

Share the complete model, hardware suffix, firmware, quantity and destination with Myrtle. We can review controller identification, rack compatibility and available supply options before quotation.

Hot Tags: ge ic695cpe310-bhae pacsystems rx3i controller, China ge ic695cpe310-bhae pacsystems rx3i controller manufacturers, suppliers, GE IC695CEP001, GE IC695CPE302, ge pac systems rx3i, IC695CEP001, IC695CEP001 CEP Carrier Module, IC695CPE302

Send Inquiry