GE IC694APU300-FD RX3i High-Speed Counter Module
FD-identified RX3i high-speed counter module with selectable 5 V or 10-30 V inputs, counter operating modes and four protected positive-logic outputs.
|
New & original
|
One-year warranty
|
3-5 days
|
Condition: In stock
|
Request a quote |
What matters when specifying IC694APU300-FD
|
High-speed counter module
IC694APU300-FD is the complete supplied identity for this high-speed counter module.
|
Official documentation
Content is based on Emerson PACSystems RX3i System Manual GFK-2314; verify the latest revision for the installed system.
|
Project compatibility
Check rack or station type, power budget, wiring, firmware and terminal hardware before replacement.
|
Full suffix control
Order IC694APU300-FD by its complete label; do not reduce it to IC694APU300 without a revision check.
|
Description and purpose
|
IC694APU300-FD is an FD-suffix unit in the IC694APU300 RX3i high-speed counter family. It processes pulse and encoder signals independently of normal CPU scan timing and supports configurable counter types, preload, strobe, disable and output functions. The module provides selectable 5 V or 10 to 30 V input thresholds, 12 positive-logic single-ended inputs or six differential inputs, and four positive-logic outputs. Classic and enhanced operating modes have different CPU/firmware requirements, so the FD label and installed configuration must be reviewed together. |
Purchase verification
Send the complete IC694APU300-FD label, clear front and connector photos, installed rack or station details, terminal hardware, field wiring, power information, quantity and destination. Compare every suffix before quotation.
|
Technical specifications
Restated from Emerson PACSystems RX3i System Manual GFK-2314. Confirm the complete IC694APU300-FD nameplate and the latest installation documentation before replacement.
Planning a IC694APU300-FD replacement?
|
Share the full IC694APU300-FD nameplate, rack or station configuration, power and wiring details, terminal hardware, firmware or option settings, fault symptoms, photographs, quantity and destination. Myrtle will compare identity and compatibility points before quotation.
|
Email Myrtle sales5@askplc.com |
WhatsApp +86 18950128464 |
Applications
|
Encoder feedback
Processes documented single-ended or differential encoder signals for position and direction.
|
Pulse counting
Performs high-speed event counting outside the normal PLC scan.
|
Rate measurement
Supports speed, flow and frequency-related applications through configured counter/timebase functions.
|
Preset output control
Uses counter presets and protected outputs for fast local response to count events.
|
Ordering information
|
Payment
100% advance before shipping
|
Port
Xiamen
|
Delivery time
3-5 days
|
Condition
In stock
|
Carrier selection is arranged according to destination, shipment size and buyer requirements.
|
DHL
Express
|
UPS
Worldwide
|
FedEx
Priority
|
TNT
International
|
ARAMEX
Logistics
|
SF Express
Asia network
|
Product image and identification notes
|
PHOTO VERIFICATION
Confirm the exact IC694APU300-FD in the photographs
Use clear front, side, label, connector and terminal photographs. The complete IC694APU300-FD suffix, revision, safety markings, terminal hardware and physical condition must remain readable and should be compared with the installed project.
Front labelSide viewConnector detailTerminal hardware
|
![]() |
FAQ about IC694APU300-FD
|
Which input signals can IC694APU300-FD accept?
IC694APU300-FD supports selectable 5 VDC or 10 to 30 VDC thresholds and can use 12 single-ended positive-logic inputs or six differential inputs. Verify TSEL and terminal assignments.
|
How many outputs does IC694APU300-FD provide?
IC694APU300-FD provides four positive-logic outputs. Their external supply, load current, inrush and protection behavior must be checked against the official wiring data.
|
|
Can IC694APU300-FD use classic and enhanced counter modes?
IC694APU300-FD belongs to the APU300 family that supports classic and enhanced operation. Enhanced mode requires a compatible RX3i CPU firmware level, documented as 7.13 or later.
|
Does IC694APU300-FD need external 24 VDC power?
IC694APU300-FD draws logic power from the 5 V backplane bus, but field I/O and isolated 24 V requirements must be supplied correctly. IC695 power supplies do not place isolated 24 V on the backplane.
|
|
Why must the FD suffix be verified on IC694APU300-FD?
IC694APU300-FD hardware/firmware identity affects available behavior and compatibility. Compare the FD nameplate, firmware, CPU revision, counter mode and project configuration before replacement.
|
What information is needed to quote IC694APU300-FD?
For IC694APU300-FD, send the complete label, firmware indication, CPU firmware, counter type, encoder/input voltage, terminal wiring, output loads, symptoms, photos, quantity and destination.
|
About PLCEXPORT
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.
Recommended models
Recommended product families are grouped by brand. Send the complete catalog number and revision when requesting availability.
Schneider Electric
Honeywell
|
DIRECT SALES SUPPORT
Confirm the exact IC694APU300-FD before orderingSend the complete label, installed configuration, wiring, photographs, quantity and destination. Myrtle will review identity and compatibility points before quotation. |
Email Myrtle sales5@askplc.com |
WhatsApp +86 18950128464 |
Hot Tags: ge ic694apu300-fd rx3i high-speed counter module, China ge ic694apu300-fd rx3i high-speed counter module manufacturers, suppliers, GE Fanuc IC695CEP001, GE Fanuc IC695CPE302, GE IC695CPE302, ge pac systems rx3i, IC695CEP001, IC695CPE302 CPU module


