GE IC694ALG392-FG RX3i 8-Channel Analog Output Module
FG firmware 2.01 release of the eight-channel RX3i current/voltage output module with per-channel range selection and external 24 VDC field power.
|
New & original
|
One-year warranty
|
3-5 days
|
Condition: In stock
|
Request a quote |
What matters when specifying IC694ALG392-FG
|
8-channel analog current/voltage output module
IC694ALG392-FG is the complete supplied identity for this 8-channel analog current/voltage output module.
|
Official documentation
Content is based on Emerson GFK-2557G and GFK-2314; verify the latest revision for the installed system.
|
Project compatibility
Check rack or station type, power budget, wiring, firmware and terminal hardware before replacement.
|
Full suffix control
Order IC694ALG392-FG by its complete label; do not reduce it to IC694ALG392 without a revision check.
|
Description and purpose
|
IC694ALG392-FG is the FG hardware/firmware release of the PACSystems eight-channel single-ended analog output module. Each channel can be configured for 0 to 10 V, -10 to +10 V, 0 to 20 mA or 4 to 20 mA operation. All eight channels are updated in approximately 8 ms with 15- to 16-bit conversion depending on the selected range. The module requires an external 24 VDC source at its terminal block. In current mode it can report an open-wire fault, and configured stop behavior can hold the last value or reset outputs. |
Purchase verification
Send the complete IC694ALG392-FG label, clear front and connector photos, installed rack or station details, terminal hardware, field wiring, power information, quantity and destination. Compare every suffix before quotation.
|
Technical specifications
Restated from Emerson GFK-2557G and GFK-2314. Confirm the complete IC694ALG392-FG nameplate and the latest installation documentation before replacement.
Planning a IC694ALG392-FG replacement?
|
Share the full IC694ALG392-FG nameplate, rack or station configuration, power and wiring details, terminal hardware, firmware or option settings, fault symptoms, photographs, quantity and destination. Myrtle will compare identity and compatibility points before quotation.
|
Email Myrtle sales5@askplc.com |
WhatsApp +86 18950128464 |
Applications
|
Valve positioning
Generates current or voltage commands for compatible control-valve positioners.
|
Variable-speed drives
Provides documented speed or torque references to analog drive inputs.
|
Process setpoints
Produces eight configurable analog setpoints from one RX3i slot.
|
Revision-specific maintenance
FG revision is used where the documented hold-last-state correction must be retained.
|
Ordering information
|
Payment
100% advance before shipping
|
Port
Xiamen
|
Delivery time
3-5 days
|
Condition
In stock
|
Carrier selection is arranged according to destination, shipment size and buyer requirements.
|
DHL
Express
|
UPS
Worldwide
|
FedEx
Priority
|
TNT
International
|
ARAMEX
Logistics
|
SF Express
Asia network
|
Product image and identification notes
|
PHOTO VERIFICATION
Confirm the exact IC694ALG392-FG in the photographs
Use clear front, side, label, connector and terminal photographs. The complete IC694ALG392-FG suffix, revision, safety markings, terminal hardware and physical condition must remain readable and should be compared with the installed project.
Front labelSide viewConnector detailTerminal hardware
|
![]() |
FAQ about IC694ALG392-FG
|
Which output ranges are available on IC694ALG392-FG?
Each IC694ALG392-FG channel can be configured for 0-10 V, -10 to +10 V, 0-20 mA or 4-20 mA operation. Verify the setting for every connected load.
|
How many channels does IC694ALG392-FG update?
IC694ALG392-FG provides eight single-ended output channels and updates all eight in approximately 8 ms, subject to the configured system scan.
|
|
Does IC694ALG392-FG require external field power?
Yes. IC694ALG392-FG requires an external 24 VDC source connected directly to the terminal block; the rack 5 V supply alone is not sufficient.
|
What changed with the FG release of IC694ALG392-FG?
Emerson GFK-2557G identifies IC694ALG392-FG as firmware 2.01 and states that it fixes improper hold-last-state behavior introduced in the EF release.
|
|
What happens to IC694ALG392-FG outputs during stop or power interruption?
IC694ALG392-FG output behavior depends on configuration and external field power. Verify Hold Last State versus reset-to-zero behavior and test the plant-safe response.
|
What information is needed to quote IC694ALG392-FG?
For IC694ALG392-FG, send the full label, firmware, per-channel range, stop-mode settings, load impedance, external 24 V supply, terminal board, photos, quantity and destination.
|
About PLCEXPORT
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.
Recommended models
Recommended product families are grouped by brand. Send the complete catalog number and revision when requesting availability.
Schneider Electric
Honeywell
|
DIRECT SALES SUPPORT
Confirm the exact IC694ALG392-FG before orderingSend the complete label, installed configuration, wiring, photographs, quantity and destination. Myrtle will review identity and compatibility points before quotation. |
Email Myrtle sales5@askplc.com |
WhatsApp +86 18950128464 |
Hot Tags: ge ic694alg392-fg rx3i 8-channel analog output module, China ge ic694alg392-fg rx3i 8-channel analog output module manufacturers, suppliers, GE Fanuc IC695CEP001, GE Fanuc IC695CPE302, GE IC695CEP001, ge pac systems rx3i, IC695CPE302, IC695CPE302 CPU module


