
Products Description
In a typical 3300 XL installation, sensing elements are mounted directly on machine casings, while signal conditioning hardware is placed in instrumentation racks located meters away. The 330130-045-01-00 extension cable exists specifically to bridge that physical separation while remaining electrically transparent to the monitoring system.
Rather than acting as a generic interconnect, this cable is treated by the 3300 XL architecture as a defined section of the measurement path. Its construction ensures that signal behavior seen by the proximitor electronics remains predictable, regardless of routing complexity. This is especially relevant in large turbine halls or compressor skids where cables must pass near high-current equipment and structural steel.
Characteristics

♦ Forms a defined electrical segment within 3300 XL measurement channels
♦ Supports consistent measurement behavior across distributed machinery layouts
♦ Designed for routing through industrial frames, trays, and enclosures
♦ Connector interfaces aligned with 3300 XL field hardware geometry
♦ Jacket material suited for long-term exposure inside machinery areas
♦ Intended for static installation rather than frequent reconnection
Applications
This model is most often selected in installations where equipment layout forces control cabinets to be positioned away from rotating machinery. It is frequently used during plant expansions or retrofits, allowing engineers to extend sensor reach without altering rack locations or reconfiguring monitoring logic. The cable also plays a role in maintaining consistency across multi-channel systems, ensuring that parallel measurement loops behave uniformly.
Parameter Table
| Parameter | Specification |
|---|---|
| Model Number | 330130-045-01-00 |
| Cable Length Code (A) | 045 |
| Cable Length | 4.5 meters |
| Cable Length (feet) | 14.8 feet |
| Cable Option Code (B) | 01 |
| Cable Type | Armored cable |
| Connector Protector | None |
| Agency Approval Code (C) | 00 |
| Agency Approval | Not required |
| Applicable System | 3300 XL 8 mm Proximity Transducer System |
| Length Matching Rule | Extension cable length + probe length = Proximitor Sensor total length |
Contact Information
For pricing, availability, or technical consultation regarding this model, please contact our sales team:
【Sales Manager】
Silver
【WhatsApp】
+86-18020714492

【Email】
sales1@askplc.com
【WeChat】
+86-18020714492
FAQ
Q1 Why is this cable treated as part of the measurement channel instead of simple wiring?
Because the 3300 XL system accounts for cable characteristics when interpreting probe signals, making the extension cable functionally relevant.
Q2 Can this model be shortened or cut on site?
No. Altering the cable length would change the defined channel behavior and is not recommended.
Q3 Is this cable interchangeable with earlier 3300 (non-XL) series cables?
It should only be used within 3300 XL systems to avoid mismatched channel characteristics.
Q4 When relocating monitoring racks, does this cable allow reuse of existing probes?
Yes, provided the total system configuration remains within defined limits.
Q5 What is the most common installation mistake with this model?
Mixing different cable types or lengths within the same monitoring rack, which can introduce channel inconsistency.
OUR HUGE STOCK



Hot Tags: bently nevada 330130-045-01-00 3300 xl standard extension cable, China bently nevada 330130-045-01-00 3300 xl standard extension cable manufacturers, suppliers, bently nevada 3300 series and 3300 xl proximity probe, 330180 51 05 Extension Cable, 330103 06 25 10 02 00 3300 XL 8 mm Proximity Probes, Bently Nevada 330103 06 25 10 02 00, 330903 00 05 10 01 05 manual, Bently Nevada 330903 00 05 10 01 05

