Allen-Bradley 1756-L82E ControlLogix 5580 Controller

Allen-Bradley 1756-L82E ControlLogix 5580 Controller

Allen-Bradley · ControlLogix 5580 Standard Controller
1756-L82E
The 1756-L82E is a 5 MB ControlLogix 5580 standard controller with an embedded Ethernet interface and a USB service port.
Condition
Confirm available condition
MOQ
1 piece
Warranty
1 year
Availability
Confirm current stock
Weight
Approx. 0.394 kg (module)
Dimensions
145.5 x 34.57 x 140.13 mm (H x W x D)
Origin
United States (pictured unit; confirm supplied unit)
Ships from
Xiamen, Fujian, China
SALES MANAGER
Cristina
Send the model, quantity and destination for a faster quotation.
Send Inquiry
Description
5 MB USER MEMORY · GIGABIT ETHERNET · 5580

1756-L82E at a Glance

It provides a chassis-based platform for projects combining local I/O, networked devices and standard machine control. Device count, chassis series and software revision are important selection details: the advertised 175-node EtherNet/IP capacity and operating-temperature limit have documented conditions.

Buyer and Engineering Checks

Count configured Ethernet nodes

Provide the I/O tree and planned additions. The 175-node figure applies from Logix Designer v30; network traffic, module limits and remaining controller resources still need review.

Record the chassis series

Photograph the chassis catalog and series label. A Series B installation has a lower published ambient-temperature ceiling than Series C for this controller.

Confirm the exact software baseline

Match the controller catalog, hardware series, firmware and Studio 5000 version to the project. Review any motion, third-party module and communication requirements before substitution.

Declare whether redundancy is required

For a redundant system, provide the qualified bundle and module list. The embedded Ethernet port is disabled in redundancy, and integrated motion and several legacy networks are not supported in that mode.

Allen-Bradley Specifications and Ordering Details

Controller family
ControlLogix 5580, standard controller
User memory
5 MB
Embedded Ethernet
1 port, 10/100/1000 Mbps
EtherNet/IP device capacity
175 configured nodes with Studio 5000 Logix Designer v30 or later; application limits apply
USB interface
1 USB 2.0 port, 12 Mbps; temporary local service
Task organization
32 tasks; up to 1000 programs per task
Nonvolatile memory
SD storage; current technical data lists preinstalled 1784-SD4 4 GB; confirm supplied card and hardware series
Energy storage
Embedded, non-removable
Backplane current
1.20 A at 5.1 V DC; 5 mA at 1.2 V DC
Power / thermal dissipation
6.2 W / 21.2 BTU per hour
Mounting
One slot; compatible standard 1756 chassis, Series B or C
Ambient operating temperature
0 to 60 °C with standard Series C chassis; 0 to 50 °C with standard Series B chassis
Controller weight
Approximately 0.394 kg; excluding packaging
Module outline
145.5 x 34.57 x 140.13 mm (H x W x D), customer drawing 10003772596
Country of origin
United States (pictured unit; confirm supplied unit)
Ships from
Xiamen, Fujian, China
Minimum order
1 piece
Warranty
1-year supplier warranty; coverage confirmed in quotation

Confirm the complete order code and product label before purchase or replacement.

Typical Applications

Standard machine-control projects that fit within 5 MB user memory and the applicable configured-device limit.
EtherNet/IP-based equipment with local chassis I/O and distributed devices, after network and software sizing.
Reviewed modernization of an older ControlLogix system where embedded Ethernet is useful and project conversion is planned.

1756-L82E Product View

Allen-Bradley 1756-L82E

Identification checklist

Match the complete model and order code, product label, terminal layout, power requirements and platform compatibility. A similar enclosure does not prove interchangeability.

1756-L82E FAQ

Is the 175-device capacity unconditional?

No. The official table specifies 175 configured EtherNet/IP nodes with Logix Designer v30 or later. The project, traffic and module limits must also be checked.

Can it operate at 60 °C in any compatible chassis?

No. The published limit is 60 °C with a standard Series C chassis and 50 °C with standard Series B. The complete assembly must satisfy its installation requirements.

Can I use the built-in Ethernet port in redundancy mode?

The official controller table states that the embedded Ethernet port is off when redundancy is enabled. The network architecture must use the qualified redundant-system configuration.

What should I send for a quotation?

Send 1756-L82E, the required quantity, destination and requested delivery date. Include the installed controller's label and project revision when the order is for replacement. MOQ is 1 piece.

Is this controller available for immediate delivery?

Current availability, supplied condition, included accessories and lead time are confirmed in the quotation; this page is not a live inventory commitment.

What warranty is offered?

The supplier warranty is one year, subject to the written quotation and warranty terms. This is a supplier commitment, not a statement of Rockwell factory warranty entitlement.

Company and Export Support

Moore Automation company 1Moore Automation company 2Moore Automation company 3Moore Automation company 4

We support industrial automation sourcing with model verification, product photography and export coordination. Send the model, quantity, destination and requested delivery date for a focused quotation.

Request a 1756-L82E Quotation

For a faster response, include quantity, destination, required delivery date and any replacement or compatibility notes.

WhatsApp Quote
1756-L82E

Hot Tags: allen-bradley 1756-l82e controllogix 5580 controller, China allen-bradley 1756-l82e controllogix 5580 controller manufacturers, suppliers, 1746 OA16 manual, 1746 OA16 pdf, 1771 P5 manual, 1771-P5, allen bradley, Allen Bradley 1771 P5

Send Inquiry