Siemens 6ES7417-4HL04-0AB0 CPU 417-4H Redundant Central Unit
The 6ES7417-4HL04-0AB0 is a SIMATIC S7-400H central processing unit for high-availability automation systems. It provides 10 MB of code memory and 10 MB of data memory, one MPI/DP interface, one PROFIBUS DP interface and two interfaces for H synchronization modules. Siemens lists this article as discontinued without a direct replacement, so the complete order number, hardware release, firmware and synchronization hardware must be checked before a shutdown replacement.
6ES7417-4HL04-0AB0
CPU 417-4H for S7-400H
20 MB total
Discontinued; no direct replacement
Replacement Risks to Check Before Shutdown
Record the order number, hardware release and firmware on both H CPUs. A spare that does not match the configured redundant pair can extend the outage instead of restoring redundancy.
Confirm the two synchronization modules and fiber links. Siemens replacement guidance shows that some CPU-generation changes also require different synchronization modules or fibers.
Back up the STEP 7 project and verify the memory-card type and capacity before removal. Do not assume the replacement CPU can start with an unverified card or project state.
This order number has MPI/DP and PROFIBUS DP interfaces, not integrated PROFINET. Ethernet communication in an older S7-400H installation may depend on a separate CP 443-1.
Contact Information
Send the model and quantity to Myrtle for a quick reply.
Product Image Display

Check the front label for 6ES7417-4HL04-0AB0, the hardware release and the installed firmware. Similar CPU 417 and CPU 417H front panels are not proof of interchangeability.
Verify the two H synchronization-module positions, both fiber paths and the partner CPU record. A visually correct spare can still fail commissioning when the H-system hardware generation does not match.
Map the MPI/DP and PROFIBUS DP connectors, memory card and rack slot before removal. This model has no integrated PROFINET port, so any Ethernet path should be traced to its separate communication processor.
Contact Myrtle about 6ES7417-4HL04-0AB0
Ask for current price, stock and delivery time.
Frequently Asked Questions
What exactly is Siemens 6ES7417-4HL04-0AB0?
It is the CPU 417-4H central processing unit for SIMATIC S7-400H high-availability systems. It runs the control program and, when engineered as an H pair, exchanges synchronization data with the partner CPU through two H synchronization modules.
How much work memory does 6ES7417-4HL04-0AB0 have?
The integrated work memory is 20 MB in total: 10 MB for program code and 10 MB for data. This split must be considered when checking whether an archived STEP 7 project and its data blocks fit the replacement CPU.
Does 6ES7417-4HL04-0AB0 include a PROFINET interface?
No. Its integrated communication is one MPI/DP interface and one PROFIBUS DP interface, plus two interfaces for H synchronization modules. If the plant uses Industrial Ethernet, check for a separate CP 443-1 in the rack.
Can 6ES7417-4HL04-0AB0 replace another CPU 417H without project changes?
Not safely on order number alone. Compare both CPUs' order numbers, hardware releases and firmware, then verify the STEP 7 hardware configuration, memory card, synchronization modules and fibers before planning the exchange.
Is 6ES7417-4HL04-0AB0 still an active Siemens product?
No. Siemens lists it as discontinued from 1 October 2012 and deleted without replacement. Sourcing therefore depends on verified legacy stock, and traceability plus condition checks are important before dispatch.
What should be checked when pairing a spare 6ES7417-4HL04-0AB0?
Record the firmware and hardware release of both installed CPUs and confirm the H synchronization components. A mismatch can prevent the standby CPU from entering the intended redundant state even when the part number looks similar.
Which memory card is suitable for 6ES7417-4HL04-0AB0?
The CPU accepts S7-400 FLASH or RAM memory cards with capacities up to 64 MB. Match the card type, capacity and backed-up project to the existing installation; do not move an unverified card during an outage.
What information is needed to quote 6ES7417-4HL04-0AB0 correctly?
Provide clear photos of the front and side labels, hardware release, firmware, memory-card details, partner CPU order number, synchronization-module numbers, required quantity and destination. These details reduce the risk of shipping a physically similar but incompatible spare.
Order Information
Basic order terms for Siemens 6ES7417-4HL04-0AB0.
Technical Verification, Inventory Control and Order Fulfillment
PLCEXPORT coordinates model verification, stock review, visible-condition checks and export preparation for mature PLC and DCS hardware. For a legacy H-system CPU, our workflow starts with the complete order code and installed-system information so the quotation reflects the actual replacement risk.
Recommended Models
PLCEXPORT links below open existing product pages. The specialist-brand references are provided without external links.
Siemens Models on PLCEXPORT
Allen-Bradley Models on PLCEXPORT
Specialist PLC and Control Brands
Less-common controller and I/O references for maintenance searches; no external links are applied.
Confirm 6ES7417-4HL04-0AB0 Before Ordering
Send the installed CPU label, hardware release, firmware, synchronization-module details, memory-card information, quantity and destination. Myrtle will check the request against available stock before quotation.
WhatsApp +86-18950128464 Email sales5@askplc.comHot Tags: siemens 6es7417-4hl04-0ab0 cpu 417-4h redundant central unit, China siemens 6es7417-4hl04-0ab0 cpu 417-4h redundant central unit manufacturers, suppliers, 6ES7 315 2AH14 0AB0, 6ES7 315 2AH14 0AB0 Siemens, 6ES7317-2EK14-0AB0, siemens, Siemens 6ES7317 2EK14 0AB0, simatic s7 series

