Siemens ULTRAMAT 23 7MB2331-0BP00-2CA0 Gas Analyzer

Siemens ULTRAMAT 23 7MB2331-0BP00-2CA0 Gas Analyzer

ULTRAMAT 23 · CONTINUOUS GAS ANALYSIS
ULTRAMAT 23 7MB2331-0BP00-2CA0
ULTRAMAT 23 Gas Analyzer
7MB2331 familyContinuous analysisAUTOCAL-oriented operation
AVAILABILITY
In Stock · Original New · 1-Year Warranty
Get a Quote
Sales Manager: Cristina  ·  sales3@mooreplc.com  ·  WhatsApp +86 180 2071 4662 ↗
Send Inquiry
Description

Product Information

A Siemens ULTRAMAT 23 continuous gas analyzer from the 7MB2331 family. The configured measured components, ranges, gas path and interfaces are encoded by the complete order number and rating plate.

Order number
7MB2331-0BP00-2CA0
Analyzer family
ULTRAMAT 23
Measurement class
Continuous gas analysis
Primary method
Infrared absorption for configured IR components
Calibration concept
AUTOCAL using ambient air where permitted by configuration
Communication
Analog/digital I/O; PROFIBUS options depend on configuration
Gas components
Read from rating plate and configuration
Installation
Conditioned sample gas and approved ambient conditions

Product Detail Image

SIEMENS ULTRAMAT 23 7MB2331-0BP00-2CA0 product detail
Model-detail verificationThe actual product image helps confirm the family, connector layout and visible identification. Final supply matching uses the complete nameplate, hardware revision and host-system information.

Analyzer Overview

ULTRAMAT 23 is designed for continuous measurement of infrared-active gas components in industrial sample streams. The analyzer combines the measuring bench, gas-handling connections, operator interface and diagnostics in one instrument family. Exact components and ranges are configuration-specific.

Measurement Principle

The configured infrared channels evaluate absorption by the target gas at selected wavelengths. Signal processing converts detector response into the displayed concentration. Reliable results depend on a representative, clean and conditioned sample plus correct zero and calibration procedures.

AUTOCAL and Diagnostics

The ULTRAMAT 23 concept supports automatic calibration with ambient air for suitable configurations. Operators should respect the manual's prerequisites for ambient air quality, warm-up, cycle timing and measured component. Diagnostic states, sample flow and contamination indicators should be included in routine checks.

Integration Options

Measured values and status information can be integrated using the interfaces fitted to the ordered instrument. Siemens documentation covers analog/digital I/O and optional PROFIBUS communication. Confirm the rear-panel interfaces and the full order code before planning a replacement.

Application Areas

Common duties include emission monitoring support, combustion optimization, process-gas observation, inerting supervision and environmental measurement systems. The chosen sample conditioning, ranges and approvals must match the process gas and local regulations.

Official Documentation Basis

Technical statements are limited to the identified Siemens family and public Siemens documentation. Configuration-specific values must be confirmed against the delivered unit's rating plate.

Open Siemens Reference ↗

FAQ · 6 Questions

What does 7MB2331-0BP00-2CA0 identify?
It identifies a configured ULTRAMAT 23 gas analyzer; the full code and rating plate define the fitted measuring setup.
Which gases can it measure?
ULTRAMAT 23 configurations measure selected infrared-active components. Confirm the installed components and ranges from the rating plate.
What is AUTOCAL?
It is the analyzer's automatic calibration concept using ambient air where the configured measurement and installation conditions allow it.
Can the analyzer accept untreated process gas?
Normally the sample must be conditioned for temperature, moisture, dust and pressure as required by the measuring system.
What should be recorded before replacement?
Record the complete order code, component/range plate, gas connections, electrical interfaces, supply data and application conditions.
Is PROFIBUS always fitted?
No. Communication hardware is configuration-dependent; inspect the rear panel and order code before assuming an interface.

Recommended Models

SIEMENS · Published Models

Others · Selected Models

PAD-4-MB
M-ME-D204-12
IN1606
330180-91-05
FSDDR0322 F400
SDU101 F004
ABB TB820V2 3BSE013208R1
IQE31-1201U50034
DG-11 DGC11-3PK-6500T
DES-12-G DES-12 G 3PK-6500T

About PLC EXPORT

PLC EXPORT team

PLC EXPORT supplies industrial automation and process-control components to customers worldwide. Our team supports exact part-number checks, condition confirmation, quotation and international delivery coordination.

Clear identification · Responsive quotation · Reliable supply

Email CristinaWhatsApp ↗

CONTACT US

Subject: Siemens ULTRAMAT 23 7MB2331-0BP00-2CA0 Gas Analyzer
Required fields use browser validation.

Hot Tags: siemens ultramat 23 7mb2331-0bp00-2ca0 gas analyzer, China siemens ultramat 23 7mb2331-0bp00-2ca0 gas analyzer manufacturers, suppliers

Send Inquiry