8618950128464
sales5@askplc.com
enEnglish
GE IC200GBI001-LL VersaMax Genius Network Interface Unit

GE IC200GBI001-LL VersaMax Genius Network Interface Unit

GE · VERSAMAX GENIUS I/O

IC200GBI001-LL Genius Network Interface Unit

Connects a VersaMax I/O station to a Genius bus. Full LL nameplate, bus address, baud rate and firmware should be verified before replacement.

New & original · One-year warranty · 3–5 days · In stock
Sales Manager: Myrtle · WhatsApp +86 18950128464 · sales5@askplc.com
Send Inquiry
Description

Product InformationProduct ImagesCompanyContactRecommended Models

GE · VERSAMAX GENIUS I/O

GE IC200GBI001-LL VersaMax Genius Network Interface Unit

Network interface unit for linking a VersaMax I/O station to a Genius serial bus, with up to 128 input bytes and 128 output bytes transferred per bus scan.

PRODUCT AT A GLANCE

What matters when specifying IC200GBI001-LL

Genius bus interface
Links a VersaMax I/O station with an existing Genius serial bus.
Station capacity
Up to 64 modules, with no more than eight modules in each rack.
Configuration identity
Record the SBA, baud rate, firmware and complete LL nameplate.
Replacement control
Verify wiring, termination, supply position and module order before removal.

Description and purpose

IC200GBI001-LL is used when a VersaMax I/O station must exchange discrete and analog data with a host over a Genius I/O bus. The NIU manages the local VersaMax backplane and transfers as much as 128 bytes of input data and 128 bytes of output data during each Genius bus scan.

For a reliable replacement, document the Serial Bus Address, baud-rate switch setting, termination, cable polarity, power-supply model, firmware and exact module order. Official public manuals specify the IC200GBI001 base unit but do not define a separate LL performance change, so the complete IC200GBI001-LL nameplate should remain the purchase identity.

Purchase verification

Send the full label, firmware, bus address, baud rate, power-supply model, controller type, connector photos and station layout. Myrtle will compare the installed details before quotation.

Technical specifications

Values are restated from the GE/Emerson PACSystems VersaMax Genius Network Interface documentation. Verify the complete IC200GBI001-LL supplied-unit label.

Model
IC200GBI001-LL
Manufacturer
GE
Product family
VersaMax Modular I/O
Product type
Genius Network Interface Unit
Genius bus role
Interfaces a VersaMax I/O station to a Genius serial bus
Serial Bus Address
0–31
Supported data rates
153.6 Kbaud extended; 153.6 Kbaud standard; 76.8 Kbaud; 38.4 Kbaud
Network input data
Up to 128 bytes per bus scan
Network output data
Up to 128 bytes per bus scan
Discrete memory
1024 input points; 1024 output points
Analog memory
128 input bytes; 128 output bytes
Station capacity
Up to 64 modules; maximum 8 modules per rack
Power draw
5 V DC at 250 mA; 3.3 V DC at 10 mA
Mounting
35 × 7.5 mm conductive DIN rail
Power-supply position
Immediately to the right of the NIU
Bus setup
Rotary switches select SBA and baud rate
Cable arrangement
Removable connectors support single or redundant Genius bus cables
Identification
Verify the complete IC200GBI001-LL nameplate and installed firmware
CONFIGURATION SUPPORT

Replacing an installed Genius NIU?

Send Sales Manager Myrtle the full IC200GBI001-LL nameplate, Genius controller type, NIU firmware, station address, baud rate, rack layout, connector photos, quantity and destination. We will check the configuration details before quotation.

Applications

Remote I/O station
Connect a distributed VersaMax station to an installed Genius bus.
Plant expansion
Add local VersaMax I/O while retaining an established Genius network.
Legacy-system service
Replace an NIU after recording the address, rate, wiring and module order.
Redundant bus wiring
Use the removable connectors with a correctly engineered redundant Genius cable arrangement.

Ordering information

PaymentT/T
PortXiamen
Delivery time3–5 days
ConditionIn stock
BUYER QUESTIONS

FAQ about IC200GBI001-LL

Will IC200GBI001-LL work as a direct replacement for my existing Genius NIU?
Do not approve the replacement from the IC200GBI001 base number or housing alone. Check the complete IC200GBI001-LL nameplate, installed NIU firmware, host-controller support, power-supply model and local rack layout. GE's public manual defines the IC200GBI001 base unit but does not publish a separate LL performance specification, so the complete supplied-unit identity must remain part of the order check.
Which Genius settings must I copy before removing IC200GBI001-LL?
Record both rotary-switch settings before power-down: the Serial Bus Address must remain unique in the 0–31 range, and the selected rate must match the existing Genius bus. Also photograph termination, cable polarity and the single or redundant connector arrangement so the replacement can be wired exactly as engineered.
Can my IC200GBI001-LL station exceed 128 input or 128 output bytes per bus scan?
No. The official NIU limits are 128 input bytes and 128 output bytes per Genius bus scan. Review the mapped discrete and analog data in the controller project before adding modules; the physical station may fit more modules even when the configured network-data limit has already been reached.
How many VersaMax modules can I place behind IC200GBI001-LL?
The published station limit is up to 64 VersaMax modules, with no more than eight modules in one rack. That is not a substitute for power budgeting: confirm the load of every rack and keep the power supply immediately to the right of the NIU as specified in the installation manual.
Can I unplug IC200GBI001-LL without interrupting the rest of the Genius bus?
The removable Genius connectors support disconnecting the NIU without deliberately opening continuity to the remaining bus. Still follow the published de-energizing and wiring procedure, preserve termination and cable polarity, and treat a redundant-bus connector as an engineered pair rather than two interchangeable leads.
Why does a newly installed IC200GBI001-LL power up but not exchange I/O?
First confirm a unique SBA and the correct bus rate. Then check connector seating, termination, polarity, the power-supply position, compatible NIU firmware, host-controller configuration and recognition of each local module. A powered NIU can still remain offline when one of these installed-system details does not match.
What information should I send for an IC200GBI001-LL quotation?
Send the complete nameplate, firmware level, controller or bus-controller model, SBA, baud rate, power-supply model, rack-by-rack module order, clear connector photographs, quantity and destination. These details let Myrtle verify the exact identity and installed-system compatibility before the offer is prepared.
What should I preserve when moving IC200GBI001-LL to a replacement rack?
Keep the original module order, DIN-rail grounding arrangement, bus termination and power-supply placement. The NIU mounts on conductive 35 × 7.5 mm DIN rail, so cabinet grounding and the mechanical rail installation are part of the replacement check, not just the network wiring.

About PLCEXPORT

PLCEXPORT supports maintenance, engineering and procurement teams with model verification, responsive quotations and worldwide automation-parts supply.

Technical discussion
Technical discussionOur team checks system architecture and application details before quotation.
PLCEXPORT China
PLCEXPORT ChinaClear international coordination for automation-parts sourcing.
Team support
Team supportSales and technical colleagues coordinate model checks and order follow-up.
Inspection and packing
Inspection and packingVisible labels, connectors and package condition are checked during preparation.

Recommended models

Published product references are grouped by brand; each card shows the model only.

GE

Allen-Bradley

Others - other recommended brands

Wago PFC200
Bachmann MX213
Keba C5-IPC
Fatek FBs-40MA
ICP DAS WP-8441
B&R X20CP1586
Aaeon BOXER-6641
Advantech APAX-5580
Beckhoff CX9020-0111
Opto 22 GRV-EPIC-PR2
Weidmuller u-control 2000
Phoenix Contact AXC F 2152
Bosch Rexroth XM21
Delta DVP28SV11R2
Unitronics USC-B10-T24
Horner HE-XE105
Pilz PNOZmulti 2
Murrelektronik Cube67
Lütze 716425
Elmo G-MAS
Festo CPX-E-CEC
Gefran GFX4-IR
Jetter JC-440
Kontron KBox-A-150
DIRECT SALES SUPPORT · GENIUS I/O

Need a verified IC200GBI001-LL for an installed station?

Share the full nameplate, configuration, connector photos, quantity and destination. Myrtle will review the identity and installation details before quotation.

Hot Tags: ge ic200gbi001-ll versamax genius network interface unit, China ge ic200gbi001-ll versamax genius network interface unit manufacturers, suppliers, GE IC660BBD025, IC660BBD022, IC660BBD022 datasheet, IC660BBD022 manual, IC660BBD025 GE, IC660BBD025 manual

You Might Also Like
Send Inquiry