General Electric IC200CPU005 PLC CPU Module
IC200CPU005 is a compact VersaMax controller that executes machine logic, maintains process data and coordinates local or expanded I/O. Two built-in serial interfaces let the CPU exchange data with programming stations, operator devices and Modbus-compatible field equipment without adding a separate communication card.
maximum configurable memory*
system capacity up to 2048 I/O points
RS-232 and RS-485 communication
*Memory capacity depends on firmware revision; confirm the installed suffix and firmware before replacement.
What IC200CPU005 Does in a VersaMax System
The processor sits beside the VersaMax power supply on the DIN rail and supervises the modules arranged across the local backplane. During every scan it reads input states, solves the stored control program, updates outputs and handles housekeeping tasks such as diagnostics and timekeeping.
Its serial ports can be configured for SNP, Modbus RTU master/slave or serial I/O, making the module useful in retrofit cabinets where legacy drives, displays or service laptops still rely on serial links. Port 1 uses a 9-pin RS-232 connector; Port 2 provides a 15-pin RS-485 connection and supports long multidrop runs.
- Hardware suffix and firmware level
- Required 3.3 V power-supply capacity
- Existing serial-port protocol and baud rate
- Program backup and battery condition
- Expansion-rack module revisions
Technical Specifications
|
Manufacturer
|
General Electric / GE Fanuc
|
|
Part number
|
IC200CPU005
|
|
Product family
|
VersaMax PLC
|
|
Module role
|
Central processing unit
|
|
Configurable memory
|
Up to 128 KB on later firmware
|
|
System capacity
|
Up to 64 modules / 2048 I/O points
|
|
Program storage
|
System flash and battery-backed RAM
|
|
Embedded communication
|
RS-232 and RS-485
|
|
Port 1
|
9-pin female D-sub, RS-232
|
|
Port 2
|
15-pin female D-sub, RS-485
|
|
Supported protocols
|
SNP slave, Modbus RTU master/slave, Serial I/O
|
|
Boolean execution
|
Approx. 0.5–0.8 ms/K, revision dependent
|
|
Dimensions
|
106.7 × 128 × 69.1 mm
|
|
Backplane demand
|
5 V: 35 mA; 3.3 V: 300 mA typical
|
|
Mounting
|
VersaMax DIN-rail assembly
|
|
Origin
|
USA
|
Looking for a difficult VersaMax replacement?
Send the complete model, hardware suffix, firmware revision, quantity and destination. We will help review compatibility, stock and practical delivery options before quotation.

IC200CPU005 Package and Revision Label
The selected close-up image is the IC200CPU005 manual file. It shows the labeled package used to confirm the base part number and installed hardware suffix before a unit is released for shipment.
Inspection focus: verify the printed suffix, carton label, seal condition and correspondence with the required firmware or site backup. A base model match alone does not guarantee drop-in compatibility.

Typical Uses and Application Areas
Coordinates interlocks, sequence logic, sensors and actuators where a compact DIN-rail PLC is preferred.
Runs conveyor zones, transfer stations and local machine cells while exchanging status over serial networks.
Handles pump sequencing, alarms, level logic and small remote process packages.
Supports planned replacement of an installed VersaMax CPU while retaining compatible I/O and serial devices.
Information & FAQ
Is every IC200CPU005 revision equipped with 128 KB?
No. Earlier product literature lists 64 KB, while later firmware releases increased configurable memory to 128 KB. Check the hardware suffix and firmware rather than assuming capacity from the base number.
Can IC200CPU005 replace IC200CPUE05?
Not as a like-for-like Ethernet replacement. IC200CPU005 provides embedded RS-232 and RS-485, whereas CPUE05 adds Ethernet. Network architecture and project configuration must be reviewed first.
Why does the power supply matter?
The CPU places a significant load on the 3.3 V backplane output. A VersaMax supply with suitable expanded 3.3 V capacity is required for a dependable installation.
What should be backed up before changing the CPU?
Save the application, hardware configuration, register data where applicable, serial-port settings and firmware information. Record the RUN/STOP state and verify the replacement offline before reconnecting field outputs.
Can both serial ports use the same protocol?
They are independently configurable, but available modes and baud rates depend on firmware and programming software. Port 1 is also the normal path for CPU firmware downloads.
What details help us quote the correct unit?
Provide clear photos of the front and side labels, the full suffix, firmware requirement, quantity, destination and whether the unit is intended for a running legacy rack or a spare.
Recommended Automation Models
General Electric · Published on PLCEXPORT
View published productIC695CPE302
View published productDS200ADGIH1AAA
View published productICMFA000000-ABAC
View published productIS200SRLYH2AAA
View published product531X135PRGAYM2
View published product531X191RTBAJG1
View published productDS200FSAAG1ABA
View published productIS200VSVOH1BEF
View published productIC697MDL340
View published product
HONEYWELL · Published on PLCEXPORT
View published productFC-PDIO01
View published productFS-CPCHAS-0002
View published product51305508-100
View published productFC-TSAOH-0220M
View published productFC-IOCHAS-0002R
View published productFE-USI-0002
View published productTK-FXX102
View published product900B01-0101
View published product10006/2/1
View published product
Others · Other Recommended Brands
Additional specialist automation models considered for maintenance and replacement enquiries.
E1071
ICSP-15T
CIFX 50-RE
MPC240
315-2AG12
SST-PB3-CLX
S72402-NANANA
COMPAX3S025V4
CP 263/X
GP2600-TC41-24V
About PLCEXPORT
PLCEXPORT supports industrial plants and service companies sourcing automation, drive-control and turbine-control spare parts. Our work is centred on careful part-number checking, realistic stock communication and practical international delivery.
For discontinued or revision-sensitive components, we compare the complete label, installed platform and application context before quotation. This helps buyers reduce avoidable mismatches when planning maintenance or responding to an urgent shutdown.
Sourcing experience
Packing and logistics
Suffix and revision checks

Ask Myrtle About IC200CPU005
Send the full part number, suffix, firmware requirement, quantity and destination. We will reply with availability, lead time and the details needed for a reliable replacement decision.
Email MyrtleWhatsApp +86-18950128464Hot Tags: general electric ic200cpu005 versamax plc cpu module, China general electric ic200cpu005 versamax plc cpu module manufacturers, suppliers

