GE IC695NIU001-ADAD RX3i Ethernet NIU Plus
ADAD hardware release of the 1.1 GHz RX3i Ethernet Network Interface Unit Plus for remote EGD-based I/O stations.
|
New & original
|
One-year warranty
|
3-5 days
|
Condition: In stock
|
Request a quote |
What matters when specifying IC695NIU001-ADAD
|
RX3i Ethernet Network Interface Unit Plus
IC695NIU001-ADAD is the complete supplied identity for this rx3i ethernet network interface unit plus.
|
Official documentation
Content is based on Emerson IC695NIU001 PLUS GFK-2598L and GFK-2439; verify the latest revision for the installed system.
|
Project compatibility
Check rack or station type, power budget, wiring, firmware and terminal hardware before replacement.
|
Full suffix control
Order IC695NIU001-ADAD by its complete label; do not reduce it to IC695NIU001 without a revision check.
|
Description and purpose
|
IC695NIU001-ADAD places PACSystems RX3i and compatible Series 90-30 I/O at a remote Ethernet station. It exchanges I/O data through EGD using IC695ETM001 modules installed in the RX3i backplane. The ADAD release runs firmware 7.15 and uses revised internal flash hardware to address an uncommon power-cycle startup issue. The unit provides a 1.1 GHz processor, 20 KB of local logic, 10 MB of user-data flash, RS-232 and RS-485 ports, a battery-backed clock and dual backplane-bus support. |
Purchase verification
Send the complete IC695NIU001-ADAD label, clear front and connector photos, installed rack or station details, terminal hardware, field wiring, power information, quantity and destination. Compare every suffix before quotation.
|
Technical specifications
Restated from Emerson IC695NIU001 PLUS GFK-2598L and GFK-2439. Confirm the complete IC695NIU001-ADAD nameplate and the latest installation documentation before replacement.
Planning a IC695NIU001-ADAD replacement?
|
Share the full IC695NIU001-ADAD nameplate, rack or station configuration, power and wiring details, terminal hardware, firmware or option settings, fault symptoms, photographs, quantity and destination. Myrtle will compare identity and compatibility points before quotation.
|
Email Myrtle sales5@askplc.com |
WhatsApp +86 18950128464 |
Applications
|
Remote RX3i I/O
IC695NIU001-ADAD coordinates an RX3i universal-backplane I/O station over Ethernet.
|
EGD controller links
IC695NIU001-ADAD exchanges deterministic I/O data with an EGD-capable master controller.
|
Redundant control
IC695NIU001-ADAD supports receiving outputs from redundant controllers through configured EGD.
|
Local station logic
IC695NIU001-ADAD can execute up to 20 KB of optional local logic near the remote I/O.
|
Ordering information
|
Payment
100% advance before shipping
|
Port
Xiamen
|
Delivery time
3-5 days
|
Condition
In stock
|
Carrier selection is arranged according to destination, shipment size and buyer requirements.
|
DHL
Express
|
UPS
Worldwide
|
FedEx
Priority
|
TNT
International
|
ARAMEX
Logistics
|
SF Express
Asia network
|
Product image and identification notes
|
PHOTO VERIFICATION
Confirm the exact IC695NIU001-ADAD in the photographs
Use clear front, side, label, connector and terminal photographs. The complete IC695NIU001-ADAD suffix, revision, safety markings, terminal hardware and physical condition must remain readable and should be compared with the installed project.
Front labelSide viewConnector detailTerminal hardware
|
![]() |
FAQ about IC695NIU001-ADAD
|
What is the purpose of IC695NIU001-ADAD?
IC695NIU001-ADAD controls a remote PACSystems RX3i I/O station and exchanges I/O data automatically with an Ethernet Global Data master. IC695NIU001-ADAD is an NIU, not a general-purpose RX3i CPU.
|
What changed in the IC695NIU001-ADAD release?
IC695NIU001-ADAD uses firmware 7.15 and a revised internal flash-drive vendor. Emerson states that IC695NIU001-ADAD addresses an uncommon failure to power up correctly after a power cycle.
|
|
Does IC695NIU001-ADAD have built-in Ethernet ports?
IC695NIU001-ADAD communicates over Ethernet through backplane IC695ETM001 module(s). Verify the IC695NIU001-ADAD rack layout, ETM count, IP settings and EGD exchanges before replacement.
|
How much data can IC695NIU001-ADAD exchange?
IC695NIU001-ADAD supports EGD exchanges of up to 1300 bytes of outputs and up to 1300 bytes of inputs. Actual IC695NIU001-ADAD update time depends on configuration, controller scan and network traffic.
|
|
Which power and battery checks apply to IC695NIU001-ADAD?
IC695NIU001-ADAD nominally requires 0.52 A at 3.3 VDC and 0.95 A at 5 VDC. The IC695NIU001-ADAD RTC uses IC690ACC001; remove the shipping pull-tab and plan five-year replacement.
|
What information is needed to quote IC695NIU001-ADAD?
For IC695NIU001-ADAD, send the complete label, firmware, backplane and power-supply models, ETM modules, I/O slot map, EGD configuration, serial wiring, photos, quantity and destination.
|
About PLCEXPORT
PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.
Recommended models
Recommended product families are grouped by brand. Send the complete catalog number and revision when requesting availability.
Schneider Electric
ABB
| PM861AK01 | PM864AK01 | PM866AK01 | PM867K01 |
| CI854AK01 | CI867K01 | CI871AK01 | DI810 |
| DO810 | AI810 | AO810 | DI840 |
| DO840 | AI845 | AO845A | TU810V1 |
| TU830V1 | TB820V2 | 3BSE018161R1 | 3BSE030220R1 |
|
DIRECT SALES SUPPORT
Confirm the exact IC695NIU001-ADAD before orderingSend the complete label, installed configuration, wiring, photographs, quantity and destination. Myrtle will review identity and compatibility points before quotation. |
Email Myrtle sales5@askplc.com |
WhatsApp +86 18950128464 |
Hot Tags: ge ic695niu001-adad rx3i ethernet niu plus, China ge ic695niu001-adad rx3i ethernet niu plus manufacturers, suppliers, GE IC695CEP001, ge pac systems rx3i, IC695CEP001, IC695CEP001 CEP Carrier Module, IC695CPE302, IC695CPE302 CPU module


