GE IC694MDL754 RX3i 32-Point 12/24 VDC Output Module With ESCP

GE IC694MDL754 RX3i 32-Point 12/24 VDC Output Module With ESCP

GE FANUC · PACSYSTEMS RX3I
GE IC694MDL754 RX3i 32-Point 12/24 VDC Output Module with ESCP
High-density 32-point sourcing output module with two isolated groups, 0.75 A per point and electronic short-circuit protection.
New & originalOne-year warranty3–5 daysCondition: In stock
Send Inquiry
Description

Product InformationProduct ImagesCompanyContactRecommended Models

GE FANUC · PACSystems RX3i
GE IC694MDL754 RX3i 32-Point 12/24 VDC Output Module with ESCP

High-density 32-point sourcing output module with two isolated groups, 0.75 A per point and electronic short-circuit protection.

New & original
One-year warranty
3–5 days
Product at a glance

What matters when specifying IC694MDL754

32 sourcing outputs
Two isolated groups of sixteen outputs.
12/24 VDC loads
10.2–30 VDC operating range.
0.75 A per point
Review per-point and group loading.
ESCP protection
Automatic short-circuit, overcurrent and overtemperature protection.

Description and purpose

IC694MDL754 is a 32-point positive-logic DC output module with ESCP for the PACSystems RX3i platform. High-density 32-point sourcing output module with two isolated groups, 0.75 A per point and electronic short-circuit protection.

For maintenance or expansion, match the complete IC694MDL754 nameplate, hardware revision, installed rack or carrier, connectors, power arrangement and project requirements. Do not select a spare from appearance or the base family name alone.

Purchase verification
Send Myrtle clear label photos, the installed hardware list, wiring or network details, fault symptoms, quantity and destination. We will verify IC694MDL754 before quotation.

Technical specifications

Values restated from applicable manufacturer documentation. Confirm the complete supplied-unit label and installed-system requirements before replacement.

Model
IC694MDL754
Manufacturer
GE / Emerson
Product family
PACSystems RX3i
Product type
Positive-logic DC output module
Outputs
32, two isolated groups of 16
Rated voltage
12/24 VDC
Output range
10.2–30 VDC
Output current
0.75 A per point
Inrush capability
3 A for 10 ms without ESCP trip
Voltage drop
0.3 VDC maximum
Response time
0.5 ms maximum ON and OFF
Backplane draw
300 mA maximum from 5 V bus
Protection
Short circuit, overcurrent and overtemperature; auto recovery
External field power
+12 to +30 VDC required
Configuration note
Configure 16 module-status bits for valid ESCP status
CONFIGURATION SUPPORT
Replacement Review

Planning a IC694MDL754 replacement?

Share the complete IC694MDL754 nameplate and installed-system details. Myrtle will compare identity, power, wiring, communication and application requirements before quotation.

Nameplate photoRack or carrierPower and wiringFault symptomsQuantity & destination

Applications

01
Solenoid and valve banks
02
High-density DC actuator control
03
Protected sourcing outputs
04
RX3i machine I/O

Ordering information

Payment
100% advance before shipping.
Port
Xiamen
Delivery time
3–5 days
Condition
In stock
LOGISTICS PARTNERS

Carrier selection for IC694MDL754 is arranged according to destination, shipment size and buyer requirements.

DHL
Express
UPS
Worldwide
FedEx
Priority
TNT
International
ARAMEX
Logistics
SF Express
Asia network

FAQ about IC694MDL754

Q1

What system and revision must be matched when replacing IC694MDL754?

IC694MDL754 is designed for the PACSystems RX3i platform, but the full suffix and hardware revision still matter. Compare the complete IC694MDL754 label, installed rack or carrier, firmware where applicable, connectors and project requirements before assuming a base catalog number is interchangeable.

Q2

How are the 32 IC694MDL754 outputs grouped and powered?

IC694MDL754 divides 32 positive-logic outputs into two isolated groups of sixteen, each with its own common and external field-power connection. Check group current, conductor size and common wiring rather than evaluating only the 0.75 A IC694MDL754 point rating.

Q3

What does ESCP do on IC694MDL754?

Each IC694MDL754 output has electronic short-circuit, overcurrent and overtemperature protection with automatic recovery after the fault clears. ESCP protects the driver, but IC694MDL754 field wiring and branch protection must still follow the machine electrical design.

Q4

Why must module-status bits be configured for IC694MDL754?

IC694MDL754 uses module-status data to report ESCP and diagnostic conditions. Configure sixteen module-status bits as required; using zero status bits can produce invalid IC694MDL754 ESCP status and make troubleshooting misleading.

Q5

What details are needed for an IC694MDL754 replacement?

For an IC694MDL754 quotation, provide the full label, RX3i backplane and CPU models, terminal-block part number, field voltage, load current and inrush, ESCP fault indications, quantity and destination. These details confirm IC694MDL754 wiring and revision compatibility.

About PLCEXPORT

PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.

PLCEXPORT product handling and protective packing
Protected product handling
A technician checks and packs an automation module in PLCEXPORT protective packaging before shipment.
PLCEXPORT engineering and sales team review
Engineering review
The engineering and sales team reviews product drawings, installed-system details and buyer requirements together.
PLCEXPORT worldwide coordination team
Worldwide coordination
The PLCEXPORT team coordinates sourcing, documentation and international order requirements across regions.
PLCEXPORT customer support team
Customer support
Myrtle and the support team provide responsive quotation, order and after-sales follow-up for each request.

Recommended Models

Frequently requested industrial automation and condition-monitoring models for buyers reviewing IC694MDL754. Confirm the complete model, suffix and hardware revision before ordering.

DIRECT SALES SUPPORT

Need a verified IC694MDL754 for an installed system?

Send the full IC694MDL754 label, installed configuration, photographs, quantity and destination. Sales Manager Myrtle will review compatibility points before quotation.

@
EMAIL SUPPORT
Email Myrtle
sales5@askplc.com
Send email to Myrtle
WA
WHATSAPP
Chat with Myrtle
+86 18950128464
Open WhatsApp chat

Hot Tags: ge ic694mdl754 rx3i 32-point 12/24 vdc output module with escp, China ge ic694mdl754 rx3i 32-point 12/24 vdc output module with escp manufacturers, suppliers, GE Fanuc IC695CEP001, GE IC695CEP001, ge pac systems rx3i, IC695CEP001, IC695CEP001 CEP Carrier Module, IC695CPE302

Send Inquiry