GE IC694MDL645E RX3i 24 VDC 16-Point Input Module

GE IC694MDL645E RX3i 24 VDC 16-Point Input Module

GE PACSYSTEMS RX3i DIGITAL INPUT
IC694MDL645E RX3i 24 VDC 16-Point Input Module
16-point, 24 VDC positive/negative logic input module with 7 ms on and off response.
New & original
One-year warranty
3–5 days
Condition: In stock
Send Inquiry
Description
GE PACSYSTEMS RX3i DIGITAL INPUT

GE IC694MDL645E RX3i 24 VDC 16-Point Input Module

16-point, 24 VDC positive/negative logic input module with 7 ms on and off response.

New & original
One-year warranty
3–5 days
Condition: In stock
Request a quote

Description and purpose

IC694MDL645E is an E-revision of the IC694MDL645 24 VDC discrete input module for PACSystems RX3i. The module provides sixteen positive/negative logic inputs and a 7 ms typical on/off response for field contacts and DC sensors.

Before replacement, verify field polarity, supply range, common wiring, terminal assembly and the complete E suffix. The sixteen-point layout alone does not distinguish it from modules with different voltage or isolation characteristics.

Purchase verificationMatch IC694MDL645E, 24 VDC field power, positive/negative logic wiring and the installed terminal assembly.

Technical specifications

Values summarized from GE product data for IC694MDL645 and PACSystems RX3i hardware documentation. Final selection must follow the complete catalog number and installed system.

Model
IC694MDL645E
Manufacturer
GE
Country of origin
United States
Product family
PACSystems RX3i
Product type
DC discrete input module
Input points
16
Logic type
Positive / negative logic
Nominal field supply
24 VDC
Operating supply range
20–30 VDC
On-state threshold
Greater than 11.5 V
Input response
7 ms on; 7 ms off
Backplane / field current
80 mA at 5 VDC; 125 mA at 24 VDC
Base reference
IC694MDL645; verify E revision
DISCRETE INPUT REVIEW

Replacing a 24 VDC input card with mixed sourcing and sinking devices?

Send Myrtle the IC694MDL645E label, terminal-block code, sensor wiring type, field-supply measurement, rack slot, fault symptoms, quantity and destination. We will review the sixteen-point positive/negative logic requirement before quotation.

Sales Manager: MyrtleConfiguration review before quotation

Applications

Limit switches, proximity sensors, interlocks, motor-control feedback, conveyor status and utility equipment using 24 VDC discrete signals in RX3i systems.

Ordering information

PaymentT/T
PortXiamen
Lead time3–5 days
ConditionIn stock
BUYER QUESTIONS

FAQ about IC694MDL645E

Can GE IC694MDL645E accept both sourcing and sinking field devices?
GE identifies the base module as positive/negative logic. The field wiring and common arrangement must still be checked against the device type and RX3i manual before connection.
What voltage range should be present at IC694MDL645E inputs?
The official module data lists a 24 VDC nominal supply with a 20–30 VDC operating range and an on-state threshold above 11.5 V. Measure at the terminal under operating load.
Why might an IC694MDL645E input flicker after replacement?
Check loose terminals, sensor leakage, common wiring, supply stability, grounding and signal timing. The module has a 7 ms on/off response, so short or noisy transitions may be visible to the controller.
Can another 16-point RX3i input module replace IC694MDL645E?
Not automatically. Compare voltage, logic type, response time, terminal arrangement, current requirements and hardware configuration. Point count alone is insufficient.
Should I keep the E suffix in the purchase request?
Yes. The suffix is part of the installed item's identification. Provide a label photo so the offered revision can be reviewed before shipment.
What details help verify an IC694MDL645E quotation?
Provide full nameplate, terminal-block and wiring photos, field voltage, device type, rack model, quantity and destination. Include the failed input symptoms if troubleshooting is involved.

About PLCEXPORT

PLCEXPORT supports automation maintenance and project teams with model identification, practical compatibility checks and international supply coordination. Our China team reviews labels and order details before dispatch preparation.

 
Technical discussion
Our team compares system context, suffixes and interface details before quotation.
 
PLCEXPORT team
Colleagues coordinate identification, commercial follow-up and shipping details.
 
Packing inspection
Product identity and package condition are checked during order preparation.
 
China operations
Local coordination supports sourcing, documentation and international dispatch.

Need a documented compatibility check?

Send the complete IC694MDL645E identification, quantity, destination and installed-system details to Myrtle. We will review the request before quotation and help identify any suffix, terminal, firmware or configuration point that still needs confirmation.

EmailWhatsApp

Hot Tags: ge ic694mdl645e rx3i 24 vdc 16-point input module, China ge ic694mdl645e rx3i 24 vdc 16-point input module manufacturers, suppliers, GE Fanuc IC695CPE302, GE IC695CEP001, ge pac systems rx3i, IC695CEP001 CEP Carrier Module, IC695CPE302, IC695CPE302 CPU module

Send Inquiry