GE IC200MDL650L VersaMax 32-Point 24 VDC Positive/Negative Logic Input Module
Thirty-two-point VersaMax 24 V DC input module with four isolated groups and configurable input filtering.
Description and purpose
The IC200MDL650 provides 32 discrete 24 V DC inputs in four groups of eight. It supports positive- or negative-logic field wiring and provides a configurable input filter for balancing response speed against electrical noise.
Negative-logic operation requires revision C or later; the L revision supports that function. Users should still confirm the terminal carrier, group commons, configured filter and station firmware before replacing an installed module.
Send the IC200MDL650L label, carrier model, field-device polarity, group common wiring and configured input filter. We will verify the revision and station arrangement.
Technical specifications
Concise values checked against GE VersaMax Modules, Power Supplies and Carriers Manual GFK-1504. Confirm the complete suffix and system configuration before replacement.
Need a careful IC200MDL650L compatibility check?
Myrtle
Suffix and compatibility
Applications
Ordering information
T/T
Xiamen
3–5 days
In stock
Product image and identification notes
What buyers should verify in the photos
Confirm IC200MDL650L and the L suffix on the nameplate. Inspect the terminal carrier, group commons, connector pins and status-indicator area.
Compare sensor polarity and the four group commons with the installation drawing. If noise or short pulses are important, record the configured 0, 1 or 7 ms filter.
FAQ about GE IC200MDL650L
Can IC200MDL650L be wired for both positive and negative logic inputs?
Yes. Revision L is later than the revision C threshold GE identifies for negative-logic support. Wire each group common correctly and do not mix incompatible polarity within a group.
Why do fast pulses disappear after installing IC200MDL650L?
Check the configured input filter. The module supports 0, 1.0 and 7.0 ms settings; a longer filter rejects short pulses and electrical noise but also delays recognition.
What voltage must a sensor deliver for IC200MDL650L to turn ON?
GE specifies 15–30 V DC for ON and 0–5 V DC for OFF. Measure at the module carrier under operating load and verify the group common.
Are IC200MDL650L inputs individually isolated?
No. The 32 inputs are arranged as four isolated groups of eight, with no point-to-point isolation inside a group. Consider supply references when grouping field devices.
Will IC200MDL650L plug into any VersaMax base?
Confirm the terminal carrier, keying, station configuration and NIU/CPU compatibility. The electronics module and its carrier must be treated as one installation interface.
What information should I send for an IC200MDL650L quotation?
Provide the complete label, carrier and station model, sensor polarity, field voltage, filter setting, quantity and destination.
About PLCEXPORT
PLCEXPORT supports automation maintenance and project teams with model identification, practical compatibility checks and international supply coordination. Our China team reviews labels and order details before dispatch preparation.
Recommended models
Published product references are grouped by brand; each card shows the model only. This mix is arranged specifically for the IC200MDL650L page.
ABB - published product references
Siemens - published product references
Others - other recommended brands
Need help sourcing a difficult automation part?
Share the complete model, suffix, quantity and delivery destination with Sales Manager Myrtle. We can compare identification details before preparing a supply option.
Hot Tags: ge ic200mdl650l versamax 32-point 24 vdc positive/negative logic input module, China ge ic200mdl650l versamax 32-point 24 vdc positive/negative logic input module manufacturers, suppliers
