Products Description
BENTLY NEVADA 330425-02-CN Accelerometer Acceleration Transducer
The BENTLY NEVADA 330425-02-CN is an acceleration transducer intended for direct mechanical response capture in industrial machinery. Rather than focusing on processed vibration values, this sensor outputs raw acceleration behavior generated by structural movement and rotating components.
Its design emphasizes stable mechanical coupling and predictable signal behavior, allowing monitoring systems to interpret vibration patterns under steady-state and transient operating conditions.
With over 50 million in inventory, PLC EXPORT delivers only brand-new, authentic components- ready to ship,
rigorously tested, and backed by professional technical support.
Our address
32D Guomao Building, Siming District, Xiamen, Fujian, China
Phone Number(Whatsapp)
+86-18020714492
sales1@askplc.com

Functional Role / System Position
In a machinery monitoring configuration, the 330425-02-CN functions as a primary motion pickup mounted directly on machine structures. It senses acceleration at the source and delivers the signal to external conditioning hardware for filtering, scaling, and analysis before integration into monitoring or protection systems.
Machine Surface → Accelerometer → Signal Conditioning → Monitoring and Diagnostics.
Key Features / Functional Capabilities
■ Acceleration-based sensing suitable for structural and casing vibration analysis
■ Rigid stud-mounted interface designed to minimize signal distortion
■ Consistent electrical output supporting long-term trend comparison
■ Construction adapted for fixed installation on industrial machinery
■ Signal characteristics aligned with Bently Nevada processing equipment
■ Designed to operate under continuous mechanical excitation
Application Areas / Typical Use Cases
- Structural vibration monitoring on large rotating machines
- Detection of impulsive motion in bearing housings
- Acceleration measurement on gear-driven assemblies
- Machinery diagnostics where raw vibration energy is required
- Supplementary sensing in protection and condition monitoring systems
Product Identification
| Specification | Description |
|---|---|
| Model | 330425-02-CN |
| Sensor Category | Acceleration transducer |
| Measured Parameter | Mechanical acceleration |
| Mounting Interface | Stud mount |
| Signal Type | Acceleration output |
| Mechanical Design | Fixed-installation industrial sensor |
| Environmental Suitability | Industrial machinery environments |
| Housing | Metallic, sealed construction |
| System Integration | Bently Nevada monitoring platforms |
Installation / Handling
The transducer should be mounted on a rigid, flat surface to ensure proper transmission of mechanical motion. Installation torque must follow recommended practices to avoid loosening or mechanical decoupling. Cable routing should be secured to prevent vibration-induced wear. No field calibration is required after installation when used with compatible monitoring systems.
Advantages / Value Highlights
By delivering unprocessed acceleration signals, the 330425-02-CN allows monitoring systems to apply application-specific filtering and analysis methods. Its mechanically stable mounting approach reduces variability between installations, improving data consistency across similar machines. This makes it suitable for facilities requiring standardized vibration data across multiple assets.
Supply & Warranty Information
The BENTLY NEVADA 330425-02-CN Accelerometer Acceleration Transducer is supplied as a new industrial component.
It includes a One-year warranty, covering manufacturing and material defects under normal operating conditions.
MORE OPTIONS
| WOODHEAD | SST-DN3-PCU-2-E SST-DN3-PCI-2 | WESTINGHOUSE | 3A99220G01 |
| WOODHEAD | SST-DN3-PCI-2 DN3-PCI-1-E | WESTINGHOUSE | 3A99190G01 |
| WOODHEAD | SST-DN3-PCI-2 | WESTINGHOUSE | 3A99158G01 |
| WOODHEAD | PCU1000 | WESTINGHOUSE | 3A99132G02 3PCPS05 |
| WOODHEAD | APP-PS7-PCI | WESTINGHOUSE | 3A99132G02 |
| WOODHEAD | APPLICOM-PCI1000 | WESTINGHOUSE | 3A99132G01 |
| WOODHEAD | 8440-1041 | WESTINGHOUSE | 1X00188H01 |
| WOODHEAD | 5136-CN-VME | WESTINGHOUSE | 1X00024H01 WH1-2FF |
| WOODHEAD | 5136-CN-PCI | WESTINGHOUSE | 1P00028G01 |
Common problems
Q1 What type of signal does the 330425-02-CN provide to monitoring systems?
It provides a direct acceleration signal representing mechanical motion at the mounting location.
Q2 Why is stud mounting used for this accelerometer?
Stud mounting ensures rigid mechanical coupling, which is essential for accurate acceleration measurement.
Q3 Is this transducer intended for permanent installation?
Yes, it is designed for fixed installation on industrial machinery for continuous monitoring.
Q4 How is the signal from this accelerometer typically processed?
The signal is routed to external conditioning and monitoring equipment that performs filtering and analysis.
Q5 Can this model be used across multiple machines in the same facility?
Yes, its consistent output behavior supports standardized monitoring across similar equipment.
Hot Tags: bently nevada 330425-02-cn accelerometer acceleration transducer, China bently nevada 330425-02-cn accelerometer acceleration transducer manufacturers, suppliers, 330180 91 00 3300 XL Proximitor Sensor, bently nevada sensor, 330180 90 05 pdf, 330180-91-00, Bently Nevada 330180 90 05, Bently Nevada 330180 91 00

