Bently Nevada 3500/64M 140734-05 Dynamic Pressure Monitor

Bently Nevada 3500/64M 140734-05 Dynamic Pressure Monitor

Dimensions: 2.5x25.7x24cm
Weight: 0.84kg
Contact Sales Felicia for quotation and more info:
Mobile: +86-18950128464
Email: sales5@askplc.com
Whatsapp(Wechat): +86-18950128464
Sales Manager: Myrtle
Email: sales5@askplc.com
Call or Whatsapp: +86-18950128464
Send Inquiry
Description

Products Description

 

   The Bently Nevada 3500/64M Dynamic Pressure Monitor is a single slot, four-channel monitor that accepts input from high temperature pressure transducers and uses this input to drive alarms. The monitor's one measured variable per channel is bandpass dynamic pressure.

   You can use the 3500 Rack Configuration Software to configure the bandpass corner frequencies along with an additional notch filter. The monitor provides a recorder output for control system applications.

   The primary purpose of the 3500/64M Dynamic Pressure Monitor is to provide the following:

        Machinery protection by continuously comparing monitored parameters against configured alarm setpoints to drive alarms

        Essential machine information for operations and maintenance personnel

   Each channel, depending on configuration, conditions its input signal to generate various parameters called measured variables. You can configure alert and danger setpoints for each active measured variable.

 

 

Contact Us to Get the Best Price

Sales Person Felicia
Whatsapp/Wechat +86-18950128464
Email sales5@askplc.com
Phone Number +86-18950128464

 

Products Parameters

 

Item Specification
2-wire 3.3 mA current source @ 22 V DC (nominal)
3-wire –24 V DC
Accepts 1 to 4 pressure transducer signals
Input Impedance 2-wire: 1.5 MΩ to 3.5 MΩ typical; 3-wire: 10 kΩ
Current +4 to +20 mA (proportional to monitor full-scale)
Channels Individual recorder output per channel
Compliance Voltage 0 to +12 V DC across load
Load Resistance 0 to 600 Ω
Current Output Sensitivity 0.3662 µA per bit
Accuracy ±0.25% at room temperature; –0.66% to +0.70% over temperature range
Update Rate ≤ 100 ms
Low Mode 5 Hz to 4 kHz (extends to ≈ 5.285 kHz if no LP filter selected)
High Mode 10 Hz to 14.75 kHz
Output Impedance 550 Ω
Protection Each coaxial connector short-circuit protected
Cascade Mode Channel 1 input can be fed to all four channels; buffered outputs not cascaded
OK LED Indicates monitor operating properly
TX/RX LED Indicates communication with other 3500 rack modules
Bypass LED Indicates monitor is in Bypass Mode

 

Other Spare Parts

 

Part Number Description
176449-05 3500/64M Dynamic Pressure Monitor
140471-02 I/O Module – Internal Termination
140482-02 I/O Module – External Termination
143729-01 Cylinder Pressure I/O Module – Internal Termination
04425545 Grounding Wrist Strap
04400037 IC Removal Tool
00580434 Connector Header – Internal Termination, 8-Position, Green

 

Advantage

 

   This Bently Nevada 3500/64M 140734-05 Dynamic Pressure Monitor supports both 2-wire and 3-wire transducer configurations, with high input impedance and regulated current sources, ensuring reliable signal acquisition across all channels. Buffered outputs are protected from short circuits, and the device can cascade input from channel 1 to all channels if needed. Its fast update rate (~100 ms or less) and high accuracy across temperature ranges allow operators to make precise and timely decisions. Front-panel LEDs indicate operational status, communication activity, and bypass mode, providing clear visual feedback for maintenance personnel.

 

Industrial Applications

 

   In addition to alarm functionality, the 3500/64M provides essential machinery information for operations and maintenance personnel. By conditioning and reporting dynamic pressure values for multiple channels, it enables predictive maintenance and trending of performance data. Engineers can configure alert and danger thresholds for each measured variable and use the built-in filters to reduce noise, making it ideal for high-precision industrial applications where both protection and process insight are critical.

 

FAQ

01.How many transducer inputs does the 3500/64M support?

It supports 1 to 4 pressure transducer inputs.

02.What types of transducer connections are supported?

Both 2-wire (3.3 mA current source @ 22 V DC nominal) and 3-wire (–24 V DC) transducers are supported.

03.What is the signal range for inputs?

The monitor accepts +4 to +20 mA signals, proportional to the monitor's full-scale range.

04.Can the 3500/64M provide data to control systems?

Yes, it includes individual recorder outputs per channel with 0–12 V DC compliance and up to 600 Ω load.

05.What filtering options are available?

Dynamic pressure filtering includes Low Mode (5 Hz–4 kHz, extendable to ≈ 5.285 kHz) and High Mode (10 Hz–14.75 kHz), with optional notch filter configuration via 3500 Rack Configuration Software.

Recommendations

 

6GK1102-4AA00 6ES7193-1CL00-0XA0 TK-FXX102 140ACI03000
6GK5747-1AA60-6AA0 6ES7193-1FL60-0XA0 TC-FXX102 140ACI04000
6GK5408-2FD00-2AA2 6ES7123-1GB00-0AB0 TC-PRR021 140CPU53414A
6GK5743-1FX00-0AA0 6ES7124-1GA00-0AB0 TK-PPD011 140CPU42402
6GK5876-4AA00-2DA2 6ES7151-3BB23-0AB0 TK-IOLI01 140NOE77101
SINEAX DME442 A5E02625806-K6 TC-CCR013 140CPU43412A
6GT2602-0AB10-0AX0 6GK5786-2HC00-1AA0 TC-IOLI01 140CHS11000
6FC5211-0AA10-0AA0 6ES7151-1CA00-3BL0 TK-PRR021 MU-FOED02
6NH9720-3AA00 6ES7193-1FL60-0XA0 51198685-100 TC-PRS021
7ME6910-1AA30-1AB0 SPS5710 51199929-100 TC-PMFO01 TC-PPD011
6ES7151-1CA00-3BL0 MU-FOEA02 TC-PBFO01 140CRP93100
Sales Manager: Myrtle
Email: sales5@askplc.com
Call or Whatsapp: +86-18950128464

Hot Tags: bently nevada 3500/64m 140734-05 dynamic pressure monitor, China bently nevada 3500/64m 140734-05 dynamic pressure monitor manufacturers, suppliers, 3500 22M manual, 3500 22M, bently nevada 3500 series, Bently Nevada 3500 42M, 3500 42M Proximity Monitor, 3500 42M

Send Inquiry