Bently Nevada 330104-01-09-90-01-05 3300 XL 8 mm Proximity Probe

Bently Nevada 330104-01-09-90-01-05 3300 XL 8 mm Proximity Probe

BENTLY NEVADA 3300 XL 8 MM ARMORED PROBE

Bently Nevada 330104-01-09-90-01-05 3300 XL 8 mm Proximity Probe

Armored metric 3300 XL 8 mm standard-mount probe with M10 x 1 thread, 10 mm unthreaded length, 90 mm case, 9.0 m integral lead, ClickLoc protector and multiple approvals.

New & originalOne-year warranty3-5 days
Send Inquiry
Description
BENTLY NEVADA 3300 XL 8 MM ARMORED PROBE

Bently Nevada 330104-01-09-90-01-05 3300 XL 8 mm Proximity Probe

Armored metric 3300 XL 8 mm standard-mount probe with M10 x 1 thread, 10 mm unthreaded length, 90 mm case, 9.0 m integral lead, ClickLoc protector and multiple approvals.

New & original
One-year warranty
3-5 days
Condition: In stock
Request a quote
PRODUCT AT A GLANCE

What matters when specifying 330104-01-09-90-01-05

3300 XL 8 mm armored proximity probe
330104-01-09-90-01-05 is the complete supplied identity for this 3300 xl 8 mm armored proximity probe.
Official documentation
Content is based on Bently Nevada 3300 XL 8 mm Proximity Transducer System datasheet 141194; verify the latest revision for the installed system.
Project compatibility
Confirm the M10 x 1 mounting, 9.0 m integral lead, connector protection, target material, operating gap, matching 9 m Proximitor sensor and hazardous-area documentation before replacement.
Full suffix control
Order 330104-01-09-90-01-05 by its complete label; do not reduce it to 330104 without a revision check.

Description and purpose

330104-01-09-90-01-05 is an armored metric 3300 XL 8 mm standard-mount probe with an M10 x 1 thread. Its 9.0 m integral lead connects directly to a matching 9 m 3300 XL Proximitor sensor for non-contact shaft vibration, axial position, eccentricity, speed or phase measurement.

The suffix identifies 10 mm unthreaded length, a 90 mm case, 9.0 m total probe length, ClickLoc connector with protector and multiple approvals. Users should preserve the complete option code, system length, target material, probe gap, hazardous-area circuit and monitor configuration.

Purchase verification
Send the complete 330104-01-09-90-01-05 label, clear probe-tip, case-thread, armor, cable and connector photos, the installed 3300 XL Proximitor label, target material, mounting depth, quantity and destination. Compare every suffix before quotation.

Technical specifications

Restated from Bently Nevada 3300 XL 8 mm Proximity Transducer System datasheet 141194. Confirm the complete 330104-01-09-90-01-05 nameplate and the latest installation documentation before replacement.

Model
330104-01-09-90-01-05
Base catalog
330104 armored standard-mount probe
System
3300 XL 8 mm proximity transducer system
Mounting thread
M10 x 1
Code 01
10 mm unthreaded length
Code 09
90 mm overall case length
Code 90
9.0 m total probe cable
Code 01
ClickLoc connector with protector, standard cable
Code 05
Multiple approvals option
Linear range
2.0 mm (80 mils), approximately 0.25 to 2.3 mm
Recommended gap
1.27 mm (50 mils)
Scale factor
7.87 V/mm (200 mV/mil), +/-6.5% for the standard 9 m system
Frequency response
0 to 10 kHz for the complete system
Power
-17.5 to -26 VDC; -23 to -26 VDC with barriers; 12 mA max
DIRECT TECHNICAL SUPPORT

Planning a 330104-01-09-90-01-05 replacement?

Share the full 330104-01-09-90-01-05 label, probe mounting dimensions, target material, installed 9 m Proximitor model, cable route, connector condition, gap voltage, fault symptoms, photographs, quantity and destination. Myrtle will compare identity and compatibility points before quotation.
Email Myrtle
sales5@askplc.com
WhatsApp
+86 18950128464

Applications

Radial vibration
330104-01-09-90-01-05 measures shaft motion on fluid-film bearing machinery in a matched 8 mm system.
Axial position
330104-01-09-90-01-05 monitors thrust movement when the target and 2.0 mm range are suitable.
Speed and phase
330104-01-09-90-01-05 can support speed or Keyphasor measurements on a compatible channel.
Armored cable routes
330104-01-09-90-01-05 protects the integral cable where exposed routing needs additional mechanical protection.

Ordering information

Payment
100% advance before shipping
Port
Xiamen
Delivery time
3-5 days
Condition
In stock
LOGISTICS PARTNERS

Carrier selection is arranged according to destination, shipment size and buyer requirements.

DHL
Express
UPS
Worldwide
FedEx
Priority
TNT
International
ARAMEX
Logistics
SF Express
Asia network
BUYER QUESTIONS

FAQ about 330104-01-09-90-01-05

What does 330104-01-09-90-01-05 specify?
330104-01-09-90-01-05 specifies an armored 8 mm probe with 10 mm unthreaded length, 90 mm case, 9.0 m integral lead, ClickLoc connector protector and multiple approvals.
What range does 330104-01-09-90-01-05 provide?
In a matched 3300 XL 8 mm system, 330104-01-09-90-01-05 provides a 2.0 mm (80 mil) linear range with a recommended 1.27 mm gap and 7.87 V/mm scale factor.
Can 330104-01-09-90-01-05 use an 11 mm Proximitor?
No. 330104-01-09-90-01-05 belongs to the 3300 XL 8 mm system. Use the matching 9 m 3300 XL 8 mm Proximitor sensor directly; do not add an extension cable to 330104-01-09-90-01-05.
Does 330104-01-09-90-01-05 include cable armor?
Yes. The 330104 base catalog is the armored standard-mount version. Inspect the armor, connector protector and routing when installing 330104-01-09-90-01-05.
Which total system length is required for 330104-01-09-90-01-05?
The 330104-01-09-90-01-05 probe has a 9.0 m integral lead and should connect directly to the matching 9 m 3300 XL Proximitor sensor. Do not add an extension cable to this 9 m probe configuration.
What is needed to quote 330104-01-09-90-01-05?
For 330104-01-09-90-01-05, send the probe and 9 m Proximitor labels, M10 x 1 mounting depth, target material, armor and connector photos, gap voltage, monitor model, quantity and destination.

About PLCEXPORT

PLCEXPORT supports maintenance, engineering and procurement teams sourcing industrial automation components for active and legacy control systems.

Model verification
Model verification
We compare the complete 330104-01-09-90-01-05 label, M10 x 1 case, 10/90 mm geometry, 9.0 m armored lead, ClickLoc protector, approval marking and visible condition before quotation.
Technical coordination
Technical coordination
Our team reviews the probe mounting, target, gap, cable route, matching Proximitor sensor, monitor channel and hazardous-area requirements.
Inspection and packing
Inspection and packing
The supplied 330104-01-09-90-01-05 probe tip, M10 x 1 case, armor, 9.0 m lead, ClickLoc connector protector, markings and packaging are checked before international dispatch.
Customer support
Customer support
Myrtle coordinates availability, documentation, order details and worldwide delivery follow-up.
DIRECT SALES SUPPORT

Confirm the exact 330104-01-09-90-01-05 before ordering

Send the complete label, installed configuration, wiring, photographs, quantity and destination. Myrtle will review identity and compatibility points before quotation.

Email Myrtle
sales5@askplc.com
WhatsApp
+86 18950128464

Hot Tags: bently nevada 330104-01-09-90-01-05 3300 xl 8 mm proximity probe, China bently nevada 330104-01-09-90-01-05 3300 xl 8 mm proximity probe manufacturers, suppliers, 330104 00 08 90 02 05 datasheet, 330180-51-05, 330903 00 05 10 01 05 3300 XL 8 mm Proximity Probes, 330903-00-05-10-01-05, bently nevada, Bently Nevada 330104 00 08 90 02 05

Send Inquiry